BASF Ultramid® 8267G HS BK-102 15/25% Glass/Mineral Filled PA6 (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass/Mineral Reinforced
Manufacturer	BASF
Trade Name	Ultramid®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® 8267G HS BK-102 15/25% Glass/Mineral Filled PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ultramid 8267G HS BK-102 is a heat stabilized, black pigmented, 40% mineral and glass fiber reinforced nylon 6 injection molding compound. It possesses a balance of engineering properties in combination with excellent dimensional stability, low warp and resistance to sink-mark formation. It exhibits high strength, rigidity, and good heat distortion temperature. It resists creep under load and the heat stabilizer system extends its retention of properties at elevated temperatures. It has good chemical resistance to greases, oils and hydrocarbons.

Physical Properties	Metric	English	Comments
Density	1.48 g/cc	0.0535 lb/in³	ISO 1183
Water Absorption	0.90 %	0.90 %	24 hour; ISO Test
	5.7 %	5.7 %	ISO 62
Moisture Absorption at Equilibrium	1.6 %	1.6 %	23°C/50% R.H.; ISO 62
Linear Mold Shrinkage	0.0040 cm/cm	0.0040 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	121	121	ASTM Test
Tensile Strength at Break	130 MPa	18900 psi	0.2 in/min; ASTM Test
Tensile Strength, Ultimate	125 MPa	18100 psi	5mm/min; ISO 527
Elongation at Break	3.0 %	3.0 %	5mm/min; ISO 527
	3.0 %	3.0 %	0.2 in/min; ASTM Test
Tensile Modulus	8.30 GPa	1200 ksi	1mm/min; ISO 527
	2.74 GPa @Temperature 120 °C	397 ksi @Temperature 248 °F	ISO Data
	3.53 GPa @Temperature 80.0 °C	512 ksi @Temperature 176 °F	ISO Data
	9.79 GPa @Temperature -40.0 °C	1420 ksi @Temperature -40.0 °F	ISO Data
Flexural Strength	195 MPa	28300 psi	ISO Data
	215 MPa	31200 psi	ASTM Test
Flexural Modulus	7.20 GPa	1040 ksi	ISO Data
	7.93 GPa	1150 ksi	ASTM Test
Izod Impact, Notched	0.550 J/cm @Thickness 3.17 mm	1.03 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Unnotched	7.40 J/cm	13.9 ft-lb/in	ASTM Test
Izod Impact, Notched (ISO)	6.00 kJ/m²	2.86 ft-lb/in²	ISO Test
	4.00 kJ/m² @Temperature -40.0 °C	1.90 ft-lb/in² @Temperature -40.0 °F	ISO Test
Charpy Impact Unnotched	5.20 J/cm²	24.7 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.500 J/cm²	2.38 ft-lb/in²	ISO 179
	0.350 J/cm² @Temperature -30.0 °C	1.67 ft-lb/in² @Temperature -22.0 °F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	31.0 µm/m-°C @Temperature -30.0 - 30.0 °C	17.2 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
CTE, linear, Parallel to Flow	30.0 µm/m-°C	16.7 µin/in-°F	ISO 11359
CTE, linear, Transverse to Flow	67.0 µm/m-°C	37.2 µin/in-°F	ISO 11359
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	215 °C	419 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	200 °C	392 °F	ISO 75
	202 °C	396 °F	ASTM Test
Flammability, UL94	HB	HB
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093

Processing Properties	Metric	English	Comments
Melt Temperature	275 °C	527 °F	Injection molding
Mold Temperature	95.0 °C	203 °F	Injection molding

Descriptive Properties	Value	Comments
Color	BK-102
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
UL.UL-C	Yes

Users viewing this material also viewed the following: