Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Volume Resistivity = 1.00e+13 ohm-cm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
ASTM D257
Quantum Polycarbonate
Information provided by Quantum Advanced Engineering Plastics
Volume Resistivity 1.00e+13 - 1.00e+14 ohm-cm
1.00e+13 - 1.00e+14 ohm-cm
IEC 60093
Raschig Group RALUPOL® 8601 UP
Glass-fiber reinforced polyester molding compound. Mold shrinkage similar to phenolic moulding compounds, low post-shrinkage, good electrical values, excellent heat resistance, good mechanical stren..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
ASTM D257
PolyOne Lubri-Tech™ NL-30GF/15T Nylon 6/12, Glass Filled, PTFE Lubricated  (discontinued **)
Description/Features:Glass Fiber ReinforcedPTFE LubricatedUL 94 HB (HEM TEST)Information provided by PolyOne Corporation.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
Conditioned; IEC 60093
Lanxess Durethan® C 38 FKAM 000000 Copolyamide
Copolyamide, film quality, high transparency, nucleated, high slip and lubricant content, medium-viscosity, good antiblock and dynamic slip propertiesApplication Examples: blown film coextrusion (ou..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
ASTM D257
Techmer ES HiFill® PA6 CM40 HS 40% Mineral Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Mineral Filler, 40% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Heat Stabilized and LubricatedAppearance: Natural ..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
Master Bond EP21AOHT Thermally Conductive, Electrically Insulating Epoxy
Master Bond Polymer Adhesive EP21AOHT is a high temperature resistant, two component, thermally conductive, electrically isolating epoxy adhesive, sealant, and coating with a forgiving 1:1 mix ratio..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
Unitika E-RUNG60 PA66, 60% Glass Fiber Reinforced, Dry
Information provided by Unitika Ltd.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
Polyplastics Duracon® WR-01 Acetal Co-polymer (POM), Chlorine water resistance
DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
cond; IEC 60093
DSM Akulon® K222-KGV4 /A PA6-GF20 FR(30)
20% Glass Reinforced, Heat Stabilized, Flame Retardant (Halogen-phosphorous-free)
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Cond)
The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
Covestro Makroblend® EL-700 Polycarbonate + Polyester Blend
Key Features:Flame retarding agentUnfilledHigh impact or high impact modifiedLight stabilized or stable to lightSuitable processing methods:Injection moldingInformation provided by Bayer Polymers.As..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
Covestro Makroblend® UT-1018 Polycarbonate + Polyester Blend
Key Features:UnfilledHigh impact or high impact modifiedLight stabilized or stable to lightSuitable processing methods:Injection moldingSheet extrusionInformation provided by Bayer Polymers.As of 1 ..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
IEC 60093
Covestro Makrolon® 2856 Polycarbonate
ISO 7391-PC,MR,(,,)-09-9Global gradeMVR (300 °C/1.2 kg) 9.5 cm3/10 minFood contact qualityMedium viscosityEasy releaseGood hydrolysis resistanceInjection molding - Melt temperature 280 - 320 °CAva..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
DSM Stanyl® TE250F9 (DAM) Nylon 46 45% Glass Reinforced, Heat Stabilized, Flame Retardant (North America)
Information provided by DSM Engineering Plastics.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® L 20 nat PA12
Medium viscosity unmodified Polyamide 12Information provided by EMS Grivory
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
50% RH; ASTM D257
DuPont™ Nomex® 419 Paper, 13 mil Nominal Thickness
Nomex® Type 419 is the uncalendared precursor of Nomex® Type 418. It is used in applications in which its lower density allows improved conformability and saturability.General NOMEX Information: ..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® TSG-30/4 FA PA666-GF30
Information provided by EMS Grivory
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® TSG-35/4 PA666-GF35
Product description: Grilon TSG-35/4 is a heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 35% glass fibers. Grilon TSG-35/4 has the following important properties: Good flo..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
dry; IEC 60093
EMS-Grivory Grivory® HT1V-3 FWA nat PA6T/6I-GF30
Product description: Grivory HT1V-3 FWA natural is a 30 wt.-% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Acc. to ISO: PA 6..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® HT1V-3 FWA nat PA6T/6I-GF30
Product description: Grivory HT1V-3 FWA natural is a 30 wt.-% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Acc. to ISO: PA 6..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® HT1V-4 FWA black 9225 PA6T/6I-GF40
Product description: Grivory HT1V-4 FWA black 9225 is a 40 wt.- % glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Acc. to ISO: ..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
CEI 60093
Addiplast Addilene PMD 50213 Polypropylene Copolymer
Mineral reinforced, improved scratch resistanceInformation provided by Addiplast.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
Celanese Hostaform® S 9243 XAP² ™ LS POM, Impact Modified
POM copolymer, modifiedInformation provided by Celanese
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
BASF Ultramid® B3WGM24 BK30564 10/20% Glass/Mineral Filled PA6 (Dry)
Ultramid B3WGM24 BK30564 is a 30% glass/mineral filled heat stabilized injection molding PA6 grade for industrial articles having medium to high rigidity and high dimensional stability.
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
ASTM D257
CEN® Electronic Material CF 150CF019 Polyimide Film
CEN®CF polyimide film is the general CEN®CN film that is coated or laminated on one or both sides with Teflon® FEP fluoropolymer. CEN®CF imparts heat sealability, provides a moisture barrier, an..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
Aremco Aremco-Bond™ 2210 High Performance Epoxide
Aluminum and Ceramic-Filled, Vibration and Impact Resistant, for Repairing Aluminum Mold and Wear Surfaces.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
Conditioned; CEI 60093
Addiplast Addinyl A2 G30 Nylon 66, 30% Glass Bead
Glass bead reinforced, improved stiffness and dimensional stabilityInformation provided by Addiplast.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
Celanese FORTRON MT9205C4 PPS, Medical Technology
Fortron MT9205C4 is an unfilled grade with a low melt viscosity used for custom compounding and extrusion. It demonstrates an excellent chemical resistance and thermal stability. Components made wi..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
IEC 60093
BASF Ultrason S 3010 PSU
Ultrason S 3010 is an unreinforced, higher viscosity injection molding and extrusion PSU grade, tougher and with improved chemical resistance. It conforms to FDA requirements of 21 CFR 177.1655.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® TR 55 LY PA12/MACMI
Product description: Grilamid TR grades are transparent thermoplastic polyamides based on aliphatic and cycloaliphatic blocks. Grilamid TR 55 LY offers a variety of interesting properties such as: c..
Copyright © lookpolymers.com All Rights Reserved