Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Izod Impact, Notched = 1.03 ft-lb/in Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256
NCMT NanoPAC™ N10 High Performance Polypropylene Nanocomposite
Characteristics: Less shrinkage Solved distortion problem Good balance in impact and stiffness High gloss Reduce production cycleApplications: Household Industry Electrical Appliances Toys IndustryI..
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256 Type A
Quadrant EPP Ketron® CA30 PEEK, Extruded 30% Carbon Fiber Reinforced Polyetherether Ketone (ASTM Product Data Sheet)
Izod Impact, Notched >= 0.550 J/cm

@Temperature 23.0 °C
>= 1.03 ft-lb/in

@Temperature 73.4 °F
ASTM D256
NIZHNEKAMSKNEFTEKHIM PE 2062T (62107) High Density Polyethylene
Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics Lexan® HP1HF PC
Very high flow, biocompatible polycarbonate for healthcare applications. EtO sterilizable.
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics Lexan® XHT3141 PC Copolymer (Europe-Africa-Middle East)
XHT3141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics Lexan® XHT3143 PC Copolymer (Asia Pacific)
XHT3143 is a high flow, UV stabilized, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics Lexan® XHT3143 PC Copolymer (Europe-Africa-Middle East)
XHT3143 is a high flow, UV stabilized, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256
SABIC Innovative Plastics LNP FARADEX NS0031 PC+ABS (Asia Pacific)
Faradex NS0031 is a compound based on PC+ABS blend resin containing non-brominated and non-chlorinated flame retardant system, Stainless Steel. Added features of this material include: EMI/RFI Shiel..
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ISO 180
Solvay Specialty Polymers Primef® 5084 30% GF PPS, Lubricated Grade  (discontinued **)
Contains PTFE lubricant. Used for injection molding of high performance parts.
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256
Solvay Specialty Polymers Amodel® AP-9240 NL Polyphthalamide (PPA) Resin, 40% Mineral Filled, Dry as Molded  (
AMODEL AP-9240 NL resin is a 40% mineral-filled, impact-modified polyphthalamide (PPA). It was designed to provide a smooth molded surface suitable for many decorative applications. This resin offer..
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256
SABIC PP 623B Polypropylene Random Co-polymer for Cast Film
Product Description: PP 623B is a PP Random Copolymer grade specially designed for Cast PP (CPP) film extrusion. It contains slip agent and anti-block additives. PP 623B offers good heat weldabil..
Izod Impact, Notched 0.550 J/cm

@Diameter 3.17 mm,
Temperature -20.0 °C
1.03 ft-lb/in

@Diameter 0.125 in,
Temperature -4.00 °F
bar; ASTM D256
BP Amoco Acctuf® 3243 Impact Copolymer Polypropylene  (discontinued **)
Suggested fabrication methods: Injection moldingFeatures: General purposeComplies with FDA specification, Title 21, CFR 177.1520.Typical property data below from injection molded samples.
Izod Impact, Notched 0.550 - 1.50 J/cm
1.03 - 2.81 ft-lb/in
Average value: 1.04 J/cm Grade Count:4
Overview of materials for Nylon 66/6, 30% Glass Fiber Reinforced
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% are incl..
Izod Impact, Notched 0.549 J/cm
1.03 ft-lb/in
ASTM D256
Kolon Kocetal® K700 General Purpose Grade Acetal Copolymer
Thermal properties: Kocetal has excellent heat stability; heat degradation is little under long term and high temperature application, compared to other POM. Maximum applicable temperature of produ..
Izod Impact, Notched 0.550 - 0.600 J/cm
1.03 - 1.12 ft-lb/in
ASTM D256
Gharda Chemicals G-PAEKâ„¢ 1200G Ultra High Performance PEK Polymer
Product Details: Ultra High Performance Thermoplastic (Poly Aryl Ether Ketone) material, virgin semi-crystalline granules suitable for injection molding, easy flow, Beige in colorApplication Areas:..
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256-03
Ipiranga Petrochem PRB 4215 Polypropylene
The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr..
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256
SABIC Innovative Plastics LNP LUBRICOMP OCP36F PPS - Linear
LNP LUBRICOMP* OCP36F is a compound based on PPS - Linear resin containing 30% Carbon Fiber, 15% PTFE/Silicone. Added features of this grade include: Bearing Grade, Electrically Conductive, Wear R..
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics ULTEM 1000RV PEI
Standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card.
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics ULTEM 1000RV PEI (Asia Pacific)
Standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card.
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics ULTEM ATX200R PEI Blend (Europe-Africa-Middle East)
High flow Polyetherimide blend with internal mold release. RoHS compliant. UL94 V0 Listing.
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics ULTEM HU1000 PEI (Asia Pacific)
Transparent, standard flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI)..
Izod Impact, Notched 0.550 J/cm

@Temperature 0.000 °C
1.03 ft-lb/in

@Temperature 32.0 °F
ASTM D256
SABIC Innovative Plastics Valox® 855 PBT (Europe-Africa-Middle East)
VALOX 855 is 15% glass reinforced PBT+PET blend with improved surface appearance. Applications: external housings, steam irons, appliance housings and lighting parts.
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256
SABIC Innovative Plastics Valox® HX3091HP PBT
PBT for compounding/fibers only. Not intended for injection molding. Biocompatible. Melt viscosity at 250C and 21.6kgf is 3500-4500 poise. Available in Natural color (1001) only.
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
SABIC Innovative Plastics NORYL N300X PPE+PS
PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V0. High heat. Dielectric strength. Dimensional stability. Suitable for E/E applications.
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
A. Schulman POLYTROPE™ TPP 1024E-01 Olefinic Elastomer For Sheet Extrusion
DescriptionPolytrope TPP 1024E-01 is an olefinic elastomer designed for sheet extrusion, profile extrusion and blow molding. TPP 1010E-01 is a natural product which can be colored and UV stabilized..
Izod Impact, Notched 0.550 J/cm

@Temperature 23.0 °C
1.03 ft-lb/in

@Temperature 73.4 °F
ASTM-D256
Polyram RamSter PF702 PBT, UV Stabilized
UV stabilized, medium viscosity PBT for injection molding applicationsInformation provided by Polyram Ram On Ind.
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256
Ensinger Tecapeek® XP-98 Medical Compression Molded PEEK Compound, 30% Carbon Fiber
Ensinger Special Polymers offers over twenty different VICTREX® PEEK blends to choose from and has the capability to blend custom compounds for specific applications. Compression molding results in..
Izod Impact, Notched 0.550 J/cm

@Thickness 3.17 mm
1.03 ft-lb/in

@Thickness 0.125 in
ASTM Test
BASF Ultramid® 8267G HS BK-106A 15/25% Glass/Mineral Filled PA6 (Dry)
Ultramid 8267G HS BK-106A is a heat stabilized, weather resistant, 40% mineral and glass fiber reinforced PA6 injection molding compound with improved UV resistance and sink mark resistance. The co..
Izod Impact, Notched 0.550 J/cm
1.03 ft-lb/in
ASTM D256
Solvay Specialty Polymers Ixef® 2530/X9027 Polyarylamide, 55% Mineral + Glass Fiber, DAM  (discontinued **)<
The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manufacturer, Solvay A..
Izod Impact, Notched 0.550 J/cm

@Temperature -30.0 °C
1.03 ft-lb/in

@Temperature -22.0 °F
ASTM D256
A. Schulman POLYTROPE™ TPP 1024E-01 Olefinic Elastomer For Sheet Extrusion
DescriptionPolytrope TPP 1024E-01 is an olefinic elastomer designed for sheet extrusion, profile extrusion and blow molding. TPP 1010E-01 is a natural product which can be colored and UV stabilized..
Copyright © lookpolymers.com All Rights Reserved