Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Volume Resistivity = 1.00e+13 ohm-cm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
ASTM D257
Owens Corning Glass Fiber Reinforced Polyester (Pultruded), 55 wt.% glass
Polyester thermosets are available in many formulations. They can be formulated for good to excellent resistance to acids, weak alkalis, and organic solvents. However, they are not recommended for u..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
E - 24/125; IPC-TM-650.2.5.17.1
Park Electrochemical Nelco® N5000 BT Epoxy Laminate and Prepreg
The Nelco N5000 BT epoxy laminate and prepreg system provides superior electrical properties. The N5000 resin system wasoriginally developed for application specific use in high densitymilitary and ..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
E - 24/125; IPC-TM-650.2.5.17.1
Park Electrochemical Nelco® N8000 Cyanate Ester Epoxy Laminate and Prepreg
The Nelco N8000 is a high-Tg cyanate ester laminate and prepreg system that provides superior performance and product integrity and is ideal for board designs with higher layer counts, finer lines a..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
Ineos ABS Lustran® PG 298
Key Features:UnfilledPlatableSuitable processing methods:Injection molding
Volume Resistivity 1.00e+13 - 1.00e+14 ohm-cm
1.00e+13 - 1.00e+14 ohm-cm
ASTM D257
Techmer ES HiFill® PA6 0266 B
Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforFeatures: High Specific GravityInformation provided by TP Composites, Inc.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
ASTM D257
Techmer ES HiFill® PA6 GF/M40 HS L BK 40% Glass/Mineral Filled
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass/Mineral, 40% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Heat Stabilized and LubricatedAppearance: BlackProc..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
ASTM D257
Techmer ES HiFill® PA6 HS L Colors Heat Stabilized
Availability: North AmericaForms: PelletsAdditive: Lubricant and Heat StabilizerFeatures: Lubricated and Heat StabilizedAppearance: Colors AvailableTPCI# 10014102Information provided by TP Composite..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
ASTM D257
Techmer ES Plastiblend® PA6 HS L MB Nylon 6
Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer and LubricantHeat Stabilized and LubricatedTPCI# 7018102Information provided by TP Composites, Inc.
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
ASTM D257
Teknor Apex Chemlon® 109 Nylon 66, Impact Grade
Notes: High-Impact; Exceptional impact strength, especially at low temperatures; FMVSS Flammability: Passes, FMVSS 302 Processing Method: Injection Molding Forms: Pellets Automotive Specifications: ..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
Tra-Con Tra-Pad FSLD Thermally Conductive Pad
TRA-PAD FSLD is a thermally conductive silicone pad. This product provides excellent thermal performance. It is capable of filling small gaps, provides natural tackiness and 15% compressibility. It ..
Volume Resistivity 1.00e+13 - 1.00e+15 ohm-cm
1.00e+13 - 1.00e+15 ohm-cm
ASTM D257
Eastman Tenite 360E2R30016 Cellulose Acetate Propionate, Natural, Trsp
Applications:AppliancesPersonal Care and CosmeticsProduct Description: Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
IEC 60093
Covestro Apec® 1895 Polycarbonate
Easy flowingeasy to demoldsoftening temperature (VST/B 120)=183 °CPreprocessingMax. Water content
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
IEC 60093
Covestro Apec® DP1-9354/1 Polycarbonate, Flame Retardant Grade
Developmental productflame retardant: V-0/3,2mm (UL 94)V-2/1,5mm (UL 94),softening temperature (VST/B 120)=185 °Calso available in transparent colorsPreprocessingMax. Water content
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
IEC 60093
Covestro Makroblend® DP UT3907 Polycarbonate + PBT, Impact Grade
Developmental product(PC+PBT)-blendhigh flowimpact modifiedeasy releaseUV-stabilizedinjection molding grade Makroblend DP UT3907* offers superior flowability, good impact strength and excellent ch..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® BG-25 S PA6-GF25
Product description: Grilon BG-25 S is a heat stabilized PA6 injection molding grade with 25 % glass fibers. Grilon BG-25 S has the following important properties: Excellent surface finishEasy flowi..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® BG-40 S PA6-GF40
Product description: Grilon BG-40 S is a normal viscosity PA 6 injection molding type with 40% glass fibers. Grilon BG-40 S has the following important properties: High stiffnessExcellent surface fi..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® L 20A Z PA12
Product Description: Grilamid L 20A Z is a medium viscosity product, based on Polyamide 12 (PA12). Grilamid L 20A Z is impact modified, hydrolysis-and heat stabilized. Grilamid L 20A Z is used for p..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
50% RH; ASTM D257
DuPont™ Nomex® 418 Paper, 8 mil Nominal Thickness
Nomex® Type 418 is designed for high-voltage applications such as motor conductor and coil wrap, transformer ground and layer insulation. It can be readily impregnated with varnishes. This calen..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
dry; IEC 60093
EMS-Grivory Grivory® TSGL-40/4 nat PA666-GF40
Product description: Grilon TSGL-40/4 natural is based on a heat stabilized semi-crystalline Polyamide PA66+PA6 and 40% long glass fibers. Grilon TSGL-40/4 natural is characterized by the following ..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
cond; IEC 60093
DSM EcoPaXX® Q-HG6 PA410-GF30
30% Glass Reinforced, Heat Stabilized
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® L 25 LM PA12
Product Description: Grilamid L 25 LM is a heat and UV stabilized nylon 12 grade for tube extrusion. According to DIN 73378 Grilamid L 25 LM corresponds to the type PA 12 HL. Grilamid L 25 LM fulfil..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® L 25 W 20 PA12
Product Description: Grilamid L 25 W 20 is a semi-flexible plasticized high viscosity extrusion grade of Polyamide 12 (PA12). Grilamid L 25 W 20 is UV and heat stabilized. The main features of Grila..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
conditioned; IEC 60093
EMS-Grivory Grivory® TR 90 LXS PAMACM12
Product description: Grilamid TR 90 LXS natural is a high purity transparent thermoplastic polyamide, based on aliphatic and cycloaliphatic monomers. Grilamid TR 90 LXS natural contains a processing..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
Conditioned; CEI 60093
Addiplast Addinyl A2 V40 Nylon 66, 40% Glass Filled
Glass fiber reinforced, high strengthInformation provided by Addiplast.
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
IEC 60093
Celanese Celanex® 2000-2 PBT, Unfilled
Celanex 2000-2 is a general purpose, unreinforced polybutylene terephalate with a good balance of mechanical properties and processability. Celanex 2000-2 is a high flow material that contains an in..
Volume Resistivity 1.00e+13 ohm-cm

@Thickness 3.00 mm
1.00e+13 ohm-cm

@Thickness 0.118 in
IEC 60093
Ascend Performance Materials Vydyne® R550 Nylon 66, 50% Glass Reinforced, DAM
Vydyne® R550 is general-purpose, hydrolysis-resistant, 50% glass-fiber reinforced PA66 resin. Available in natural, it is also lubricated for improved flow and offers superior surface appearance. G..
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
BASF Ultramid® B35EG3 BK 00564 15% Glass Filled PA6 (Dry)
Description: 15% glass-fiber reinforced injection-molding grade for gIT applications such as, for example, steering column switches, vehicle mirror housings and the wheels of mountain bikes.Informat..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
CEN® Electronic Material BL Polyimide Film
CEN®BL polyimide film is a printable film that has the same thermal and chemical properties as CEN®CN Polyimide Film, which offers excellent performance in temperatures from -269-400°C. CEN®BL i..
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
ASTM D 257
RTP Company RTP 207 D FR Nylon 6/12 (PA), Glass Fiber - Flame Retardant
Copyright © lookpolymers.com All Rights Reserved