Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LG Chemical AT-553 Transparent ABS, Permanent Antistatic, Natural and Colored Pellets

Category Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Transparent, Molded
Manufacturer LG Chemical
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF LG Chemical AT-553 Transparent ABS, Permanent Antistatic, Natural and Colored Pellets.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
LG transparent ABS has excellent transparency, impact strength, stiffness, and processability. Since its properties are well balanced, it can be applied widely to a variety of electric and electronic parts, OA machines, toys and others that require transparency and high impact strength. An Izod impact strength or falling dart impact strength of LG transparent ABS is relatively similar to that of general ABS, it is not easily cracked like SAN or PMMA resin in the condition of low impact energy.Information Provided by LG Chem
Physical Properties Metric English Comments
Specific Gravity 1.09 g/cc
1.09 g/cc
ASTM D792
Linear Mold Shrinkage 0.0040 - 0.0070 cm/cm
0.0040 - 0.0070 in/in
ASTM D955
Melt Index of Compound 40 g/10 min
40 g/10 min
ASTM D1238
Mechanical Properties Metric English Comments
Hardness, Rockwell R 93
93
ASTM D785
Tensile Strength at Break 37.46 MPa
5433 psi
ASTM D638
Elongation at Break 70 %
70 %
ASTM D638
Flexural Strength 54.92 MPa
7965 psi
ASTM D790
Flexural Modulus 1.60 GPa
232 ksi
ASTM D790
Izod Impact, Notched 0.0981 J/cm
0.184 ft-lb/in
ASTM D256
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 86.0 °C
187 °F
Heat deflection temperature, load unknown; ASTM D648
Flammability, UL94 HB
HB
Optical Properties Metric English Comments
Haze 6.0 %
6.0 %
Transmission, Visible 85 %
85 %
Electrical Properties Metric English Comments
Surface Resistance 2.00e+11 ohm
2.00e+11 ohm
Processing Properties Metric English Comments
Processing Temperature 190 - 200 °C
374 - 392 °F
Extrusion cylinder temperature, C1
210 - 225 °C
410 - 437 °F
Extrusion cylinder temperature, C2
230 - 240 °C
446 - 464 °F
Extrusion cylinder temperature, C3
240 - 250 °C
464 - 482 °F
Extrusion cylinder temperature, C4 and C5
Rear Barrel Temperature 190 - 200 °C
374 - 392 °F
Middle Barrel Temperature 200 - 220 °C
392 - 428 °F
Front Barrel Temperature 210 - 230 °C
410 - 446 °F
Nozzle Temperature 210 - 230 °C
410 - 446 °F
Adapter Temperature 235 - 245 °C
455 - 473 °F
Die Temperature 113 - 118 °C
235 - 245 °F
Melt Temperature 220 - 240 °C
428 - 464 °F
Injection molding
255 - 260 °C
491 - 500 °F
Extrusion
Mold Temperature 40.0 - 60.0 °C
104 - 140 °F
Roll Temperature 75.0 - 85.0 °C
167 - 185 °F
Bottom
80.0 - 90.0 °C
176 - 194 °F
Middle
85.0 - 95.0 °C
185 - 203 °F
Top
Injection Pressure 68.65 - 88.26 MPa
9957 - 12800 psi
Second
58.84 - 98.1 MPa
8534 - 14200 psi
First
Back Pressure 0.490 - 1.96 MPa
71.1 - 284 psi
Screw Speed 50 - 100 rpm
50 - 100 rpm
Copyright © lookpolymers.com All Rights Reserved