DuPont Performance Polymers Zytel® 45HSB NC010 Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® 45HSB NC010 Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Zytel® 45HSB NC010 is a high viscosity, heat stabilized polyamide 66 resin for injection molding and extrusion.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Specific Gravity	1.14 g/cc	1.14 g/cc	DAM; ASTM D792
Density	1.14 g/cc	0.0412 lb/in³	DAM; ISO 1183
Linear Mold Shrinkage, Flow	0.014 cm/cm @Thickness 2.00 mm	0.014 in/in @Thickness 0.0787 in	DAM; ISO 294-4
Linear Mold Shrinkage, Transverse	0.014 cm/cm @Thickness 2.00 mm	0.014 in/in @Thickness 0.0787 in	DAM; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength	83.0 MPa @Temperature 23.0 °C	12000 psi @Temperature 73.4 °F	DAM; ASTM D638
Tensile Strength, Yield	55.0 MPa @Temperature 23.0 °C	7980 psi @Temperature 73.4 °F	50%RH; ISO 527
	83.0 MPa @Temperature 23.0 °C	12000 psi @Temperature 73.4 °F	DAM; ISO 527
Elongation at Break	>= 50 % @Temperature 23.0 °C	>= 50 % @Temperature 73.4 °F	DAM; nominal; ISO 527
	>= 50 % @Temperature 23.0 °C	>= 50 % @Temperature 73.4 °F	50%RH; nominal; ISO 527
	90 % @Temperature 23.0 °C	90 % @Temperature 73.4 °F	DAM; ASTM D638
Elongation at Yield	4.0 % @Temperature 23.0 °C	4.0 % @Temperature 73.4 °F	DAM; ISO 527
	25 % @Temperature 23.0 °C	25 % @Temperature 73.4 °F	50%RH; ISO 527
Tensile Modulus	1.30 GPa @Temperature 23.0 °C	189 ksi @Temperature 73.4 °F	50%RH; ISO 527
	3.10 GPa @Temperature 23.0 °C	450 ksi @Temperature 73.4 °F	DAM; ISO 527
Flexural Modulus	2.80 GPa @Temperature 23.0 °C	406 ksi @Temperature 73.4 °F	DAM; ISO 178
	3.03 GPa @Temperature 23.0 °C	439 ksi @Temperature 73.4 °F	DAM; ASTM D790
Izod Impact, Notched	0.640 J/cm @Temperature 23.0 °C	1.20 ft-lb/in @Temperature 73.4 °F	DAM; ASTM D256
Izod Impact, Notched (ISO)	6.00 kJ/m² @Temperature -40.0 °C	2.86 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 180/1A
	6.00 kJ/m² @Temperature 23.0 °C	2.86 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 180/1A
Charpy Impact, Notched	0.550 J/cm² @Temperature -30.0 °C	2.62 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA
	0.600 J/cm² @Temperature 23.0 °C	2.86 ft-lb/in² @Temperature 73.4 °F	DAM; ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	500 µm/m-°C @Temperature 23.0 - 55.0 °C	278 µin/in-°F @Temperature 73.4 - 131 °F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	100 µm/m-°C @Temperature 23.0 - 55.0 °C	55.6 µin/in-°F @Temperature 73.4 - 131 °F	DAM; ISO 11359-1/-2
Melting Point	262 °C	504 °F	10°C/min; DAM; ISO 11357-1/-3
	262 °C	504 °F	DAM; ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi)	200 °C	392 °F	DAM; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	65.0 °C	149 °F	DAM; ASTM D648
	70.0 °C	158 °F	DAM; ISO 75-1/-2
UL RTI, Electrical	140 °C @Thickness 3.00 mm	284 °F @Thickness 0.118 in	DAM; UL 746B
	140 °C @Thickness 1.50 mm	284 °F @Thickness 0.0591 in	DAM; UL 746B
	140 °C @Thickness 0.710 mm	284 °F @Thickness 0.0280 in	DAM; UL 746B
UL RTI, Mechanical with Impact	95.0 °C @Thickness 0.710 mm	203 °F @Thickness 0.0280 in	DAM; UL 746B
	110 °C @Thickness 1.50 mm	230 °F @Thickness 0.0591 in	DAM; UL 746B
	110 °C @Thickness 3.00 mm	230 °F @Thickness 0.118 in	DAM; UL 746B
UL RTI, Mechanical without Impact	115 °C @Thickness 0.710 mm	239 °F @Thickness 0.0280 in	DAM; UL 746B
	125 °C @Thickness 1.50 mm	257 °F @Thickness 0.0591 in	DAM; UL 746B
	125 °C @Thickness 3.00 mm	257 °F @Thickness 0.118 in	DAM; UL 746B
Flammability, UL94	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	DAM; IEC 60695-11-10
	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10
	HB @Thickness 0.710 mm	HB @Thickness 0.0280 in	DAM; IEC 60695-11-10
	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; UL94
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in	DAM; UL94
	HB @Thickness 0.710 mm	HB @Thickness 0.0280 in	DAM; UL94

Electrical Properties	Metric	English	Comments
Comparative Tracking Index	600 V @Temperature 23.0 °C	600 V @Temperature 73.4 °F	DAM; UL 746A
	>= 600 V @Temperature 23.0 °C	>= 600 V @Temperature 73.4 °F	DAM; UL 746A

Processing Properties	Metric	English	Comments
Melt Temperature	280 - 290 °C	536 - 554 °F	DAM; Extrusion
	285 °C	545 °F	DAM; Optimum; Extrusion
	290 °C	554 °F	DAM; Optimum; Injection Molding
	280 - 300 °C	536 - 572 °F	DAM; Injection Molding
Mold Temperature	70.0 °C	158 °F	DAM; optimum; Injection Molding
	50.0 - 90.0 °C	122 - 194 °F	DAM; Injection Molding
Drying Temperature	80.0 °C	176 °F	DAM; Extrusion
	80.0 °C	176 °F	DAM; Injection Molding
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour	DAM; Injection Molding
	4.00 - 6.00 hour	4.00 - 6.00 hour	DAM; Extrusion
Moisture Content	<= 0.050 %	<= 0.050 %	DAM; Extrusion
	<= 0.050 %	<= 0.050 %	DAM; Injection Molding

Descriptive Properties	Value	Comments
Additive	Heat Stabilizer	DAM
Appearance	Natural Color	DAM
Drying Recommended	Yes, if moisture content of resin exceeds recommended level	DAM
Extrudable - Coating	Yes	DAM
Extrudable - Filament	Yes	DAM
Extrudable - Sheet	Yes	DAM
Extrudable - Tubing	Yes	DAM
Features	Heat Aging Resistance, Good	DAM
	Molecular Wt., High	DAM
	Viscosity, High	DAM
Forms	Pellets	DAM
Generic	Nylon 66	DAM
Heat Stabilized	Yes	DAM
Material Status	Current	DAM
Part Marking Code	>PA66<	ISO 11469; DAM
Polymer Family	Polyamide	DAM
Polymer Type	PA66	DAM
Processing Method	Extrusion	DAM
	Extrusion	DAM
	Injection Molding	DAM
Product Category	Extrusion Resins	DAM
	Unreinforced Resins	DAM
Resin Identification	PA66	ISO 1043; DAM
RoHS Compliance	Contact Manufacturer	DAM
Ultrasonic Weldable	Yes	DAM
Uses	Gears	DAM
	Stock Material for Machining	DAM

Users viewing this material also viewed the following: