Processing Properties | Metric | English | Comments |
---|---|---|---|
Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | |
Plastcom SLOVAMID 6 FRC 2 LS Polyamide 6, Halogen Free Flame Retardant, Light Stabilization FeaturesLongterm external use is possible because of the material stabilization with the light stabilizers on the HALS basis. Meets the flammability in accordance with the norm DIN 4102 - B1. PA 6.. |
|||
Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | |
Plastcom SLOVAMID 6 GF 20 PA6, 20% glass beads FeaturesNearly ideal anisotropy of shrinkage in the vertical and in the horizontal direction is established. Manufacturing of exact mouldings. Disadvantage are the relatively low mechanical properti.. |
|||
Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | |
Plastcom SLOVAMID 6 GF 25 FRA 5 Polyamide 6, 25% Glass Fiber, Halogen Flame Retardant FeaturesPA 6 for injection moulding, chemically reinforced with 25% glass fiber, with halogen flame retardant. Main features: flammability in accordance with UL 94 V0 at 1.6mm, glow wire at 960°C,.. |
|||
Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | |
Plastcom SLOVAMID 6 T 10 PA6, mineral filling FeaturesDecreased shrinkage against the BT types, increased heat application up to 170°C. Increased modulus in tension - strength of the material. PA matrix reduction. Application eg. for tools, fi.. |
|||
Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | |
Plastcom SLOVASTER® B1 GF 20 000/2 PBT, 20% glass fibre FeaturesPBT for injection moulding, pure without lubricant, chemically reinforced with 20% glass fibre, excellent flow. Characterised by excellent properties also at minus temperatures like eg. modu.. |
|||
Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | |
Plastcom SLOVASTER® B2 GF 10 PBT, 10% glass fibre FeaturesPBT for injection moulding, chemically reinforced with 10% glass fibre. Characterised by excellent properties also at minus temperatures like eg. modulus of elasticity in tension and bending.. |
|||
Mold Temperature | 50.0 °C | 122 °F | |
Northstar Polymers MPP-A80H Room-Temperature Curable Polyurethane MPP-A80H has been specifically formulated to service applications where high elongation and good physical strength are required as well as where temperature during the process must be low for a very.. |
|||
Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | |
Gichem GIBLEND E45X3/VO ABS - Polycarbonate - PC/ABS Flame Retardant
(discontinued **) Blend PC-ABS self-extinguishing class V0 medium fluidity. Medium injection speed.Information provided by GICHEM Gruppo Industriale Chimico |
|||
Mold Temperature | 50.0 - 100 °C | 122 - 212 °F | DAM; Injection Molding |
DuPont Performance Polymers Zytel® FE270050 BK099 Nylon 66
(Unverified Data**) Zytel® FE270050 BK099 is a 30% glass reinforced, polyamide 66 resin for gas and water assisted injection molding.Information provided by DuPont |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | DAM; Injection Molding |
DuPont Performance Polymers Zytel® 7304 NC010 Nylon 6
(Unverified Data**) Zytel® 7304 NC010 is a medium viscosity, unlubricated polyamide 6 resin for extrusion applications.Information provided by DuPont Performance Polymers |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | DAM; Injection Molding |
DuPont Performance Polymers Zytel® ST7301 BK356 Nylon 6
(Unverified Data**) Zytel® ST7301 BK356 is a Super Tough, heat stabilized, lubricated, black polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and h.. |
|||
Mold Temperature | 50.0 - 100 °C | 122 - 212 °F | |
Lehmann & Voss LUVOCOM® 55-7880 PC/ABS Alloy, with carbon fiber and glass fiber Applications: Data processing machinery, precision engineering, film and photo industry, sporting and leisure goods, medical enineering.Strong, stiff parts.Reduced moment of inertia compared with me.. |
|||
Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | |
Idemitsu Kosan Xarec® WA 214LG SPS, 40% Glass Filled Crystalline Polymer, Glass Filled |
|||
Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | Start Point: 60°C |
Kingfa PA66-RG201 Flame Retardant, 20% Glass Fiber Reinforced PA66 Features:Flame retardantHigh strengthHigh temperature propertiesGood electric propertiesNo bloomingApplications:Injection moldingConnectorsRelayBobbins, plugsE & E partsInformation Provided by Kingf.. |
|||
Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | Start Point: 60°C |
Kingfa PA6-G15 15% Glass Fiber Reinforced PA6 Features:Good size stabilityLow tendency to wrapHigh mechanical propertiesGood low temperature resistanceGood surfaceExcellent balance propertiesApplications:Injection moldingAutomobile partsPower t.. |
|||
Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | Injection Molding |
LG Chemical LUPOY GN1006FT PC, Halogen Free, Flame Retardant Description: Injection Molding, PC, Halogen Free Flame Retardant, Good FlowApplication: IT/OA, Electric & Electronic Housing and ComponentsCAS: 103598-77-2Information provided by LG Chemical |
|||
Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | Injection Molding |
LG Chemical LUPOY GP5206F PC/ABS+GF20%, Flame Retardance Description: Injection Molding, PC/ABS+GF20%, Flame Retardance, General PurposeApplication: IT/OA (Housing)CAS: 103598-77-2, 9003-56-9, 68928-70-1, 1309-64-4 and 65997-17-3Information provided by LG.. |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | DAM; Injection Molding |
DuPont Performance Polymers Zytel® FE310001 NC010 Nylon 612 Zytel® FE310001 NC010 is a high viscosity polyamide 612 resin that is suitable for extrusion applications, such as monofilaments and tubing.Information provided by DuPont Performance Polymers |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | |
Eurostar Staramide PF00AE PA6, 50% Glass Fiber Filled, Injection Molded Staramide PF00AE is a 50% Glass Fiber Reinforced, Polyamide 6 Injection Molding ResinInformation provided by Eurostar. |
|||
Mold Temperature | 50.0 - 100 °C | 122 - 212 °F | |
Eurotec® Tecomid® NA40 GR25 NL XA60 PA6.6, 25% glass fiber reinforced, flame retardant - halogen & red phosphorus free, heat stabilized, natural Information provided by Eurotec® |
|||
Mold Temperature | 50.0 - 100 °C | 122 - 212 °F | |
Eurotec® Tecomid® NA43 GR25 NL XA43 PA6.6, 25% glass fiber reinforced, flame retardant - red phosphorus free, heat stabilized, natural, UL registered Information provided by Eurotec® |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | |
Eurostar Starflam EXCP0132 PA, Mineral Filled, Injection Molding Starflam EXCP0132 is a Halogen Free and Red Phosphorous Free, Mineral Filled, Polyamide 6 Injection Molding ResinInformation provided by Eurostar. |
|||
Mold Temperature | 50.0 - 100 °C | 122 - 212 °F | |
Eurotec® Tecodur® PB70 GR30 NL XA60 PBT, 30% glass fiber reinforced, flame retardant - halogen & red phosphorus, heat stabilized, natural Information provided by Eurotec® |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | |
Eurotec® Tecomid® NA40 NL E PA6.6, unfilled, natural Information provided by Eurotec® |
|||
Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | |
Asahi Kasei Xyron® X9653 Modified Polyphenylene Ether AutomotiveInformation provided by Asahi Kasei |
|||
Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | |
Azoty Tarnow™ TARNOFORM 200 HI4 POM Rubber modified grade with very high impact strength and damping capacity.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | |
Asia International Enterprise (Hong Kong) 60C4 Nylon 66 Information provided by Asia International Enterprise (Hong Kong) Ltd. |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | DAM |
DuPont Performance Polymers Zytel® FG408L NC010 Nylon 66
(Unverified Data**) Zytel® FG408L NC010 is a general purpose, lubricated, impact modified polyamide 66 resin with superior toughness for injection molding applications. It has been developed for consideration into app.. |
|||
Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | DAM; Injection Molding |
DuPont Performance Polymers Zytel® FG7301 NC010 Nylon 6
(Unverified Data**) Zytel® FG7301 NC010 is a general purpose, unlubricated polyamide 6 resin for extrusion applications. It has been developed for consideration into applications such as parts for the food industry.In.. |