Polymer Property : Density = 1.14 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Density	1.14 g/cc	0.0412 lb/in³	method A; ISO 1183:1987
Nylacast PA6C Cast Nylon 6 Natural PA6 is the base to the other grades of material offered by Nylacast. It is available in Natural (off white) or Black colour. It is made by ionic polymerisation of e-caprolactam under anhydri..
Density	1.14 g/cc	0.0412 lb/in³	ISO.1183 DIN.53479
Omnia Plastica Omniamid PA 6 - Akulon 6 - Dry Semi-crystalline polymer of polyamide obtained by the polymerisation of the caprolactam. Its large popularity is due to both its good overall features as well as its cost-performance relationship. T..
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183
SABIC Innovative Plastics Cycoloy® CY9650 PC+ABS (Europe-Africa-Middle East) PC+ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat AgingThis data was supplied by SABIC-IP for the Europe-Africa-Middle East re..
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183
Nilit FRIANYL A63 RV0 9005 Nylon 6.6 for injection molding Nylon 6.6 for injection molding, flame retardant, halogen and phosphorus free.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183
Pasargad Polymer Peyvand Pasalen 3P-H3130B Polypropylene, 30% Glass Fiber Reinforced Form: PelletsProcessing Method: Injection MoldingUses: Automotive Application Furniture Appliance Components Automotive Exterior PartsAutomotive Interior PartsInformation provided by Pasargad Poly..
Density	1.14 g/cc	0.0412 lb/in³	ASTM D792
DSM Biomedical CarboSil® 40 90A Biocompatible Silicone Polycarbonate Urethane  (discontinued **) Combines the biocompatibility and biostability of conventional silicone elastomers with the processability and toughness of thermoplastic urethane elastomers. Noncytotoxic and nonhemolytic. Low-En..
Density	1.14 g/cc	0.0412 lb/in³	ASTM D792
Nilit Polynil® P50L Externally Lubricated Nylon 66 Description: Polynil P50L is a general purpose injection molding grade that is widely used for gears, bearings, fasteners, clips. It is also suited for monofilament extrusion.Key characteristics: Ex..
Density	1.14 g/cc	0.0412 lb/inÂ³	ASTM D792
IRPC Polimaxx Polene 2511PCX TA6 Polypropylene Compound CHARACTERISTICS: POLYPROPYLENE BLOCK COPOLYMER WITH 30% TALCUM REINFORCED HIGH IMPACT STRENGTHAPPLICATIONS: INJECTION MOLDING FOR AUTOPARTS, ELECTRICAL APPLIANCES
Density	1.14 g/cc	0.0412 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP THERMOCOMP MF006AL PP LNP* THERMOCOMP* MF006AL is a compound based on Polypropylene resin containing 30% Glass Fiber. Characteristics of this grade are: Low Extractable.
Density	1.14 g/cc	0.0412 lb/inÂ³	ISO 1183/A
Solvay TECHNYLÂ® A 216 PA66, Conditioned Description: Unreinforced polyamide 66, medium viscosity, for injection molding.Available in: Asia Pacific and Latin AmericaProduct Applications: TECHNYL Â® A 216 offers all of the primary propert..
Density	1.14 g/cc	0.0411 lb/in³	Dry mix
Unifrax Fiberfrax® Topcoat™ M Coating Cement Fiberfrax Topcoat™ 3000 and Topcoat™ M coating cements have a temperature grade rating of 1538°C (2800°F). Topcoat 3000 consists of a blend of regular ceramic fibers and high-temperature Fiberm..
Density	1.14 g/cc	0.0412 lb/in³	DIN 53479
Polyram PlusTek PA604 Nylon 6.6, Heat Stabilized High heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Density	1.14 g/cc	0.0412 lb/in³	ASTM D792
Lubrizol Pellethane® 2363-90AE Thermoplastic Polyurethane Elastomer Feature: USP Class VIAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 2009.
Density	1.14 g/cc	0.0412 lb/in³	ASTM D792
Toyobo T-661 Nylon 66, Standard Grade (DAM) Features: Non-reinforced, Standard GradeInformation provided by Toyobo.
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183
DSM Akulon® S227-C Nylon 66 (European Grade) (Dry) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Density	1.14 g/cc	0.0412 lb/in³
EMS-Griltech Grilon® BM 10 Nylon 6 Monofilament (Medium-Set) Description: GRILON BM 10 is a Nylon 6 based monofilament for filtration.Special Note: GRILON Monofilament has been bought by ShakespeareData provided by EMS-Griltech.
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183
CP-Polymer-Technik Wellamid® 6000 S Nylon 6, Finely Crystalline, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183
DSM Akulon® S223-EH Nylon 66 (European and Asian Grade) (Dry) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Density	1.14 g/cc @Temperature 300 °C	0.0412 lb/in³ @Temperature 572 °F	Melt
Covestro Makrolon® DP1-1888* Polycarbonate, 20% Glass Filled ISO 7391-PC,MR,(,,)-09-3,GF20Developmental productMVR (300 °C/1.2 kg) 10 cm3/10 min20 % Glass fiber reinforcedMilled fiberMedium viscosityEasy releasegood surface qualityInjection molding - Melt te..
Density	1.14 g/cc	0.0412 lb/in³	JIS-Z-8807
Denka REOMER G G8354 Thermoplastic Elastomer, For Injection Molding Essentially a thermoplastic elastomer with the characteristics of PVC resin and rubber, with excellent rubber-like elasticity. Offers excellent rubbery characteristics, such as permanent compressive..
Density	1.14 g/cc	0.0412 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® 42A NC010 Nylon 66  (Unverified Data**) Unreinforced High Viscosity Polyamide 66Zytel 42A NC010 is a high viscosity polyamide 66 resin for injection molding and extrusion.Information provided by DuPont Performance Polymers
Density	1.14 - 1.15 g/cc	0.0412 - 0.0415 lb/in³	ASTM D792
Cast Nylons Nycast® RX Solid Lubricant Filled Red Cast Nylon 6 NYCAST® RX is a specially formulated, self-lubricating grade designed to deliver low coefficient of friction, superior wear resistance, high pressure/velocity performance, and low moisture absorpti..
Density	1.14 g/cc	0.0412 lb/in³	ASTM D792
BASF Elastollan® C-60AW Polyester Type Polyurethane Elastomer Processed by extrusion or injection molding. Elastollan C series of products are polyester-based thermoplastic polyurethanes that exhibit very good hydrolytic stability. They also exhibit excellen..
Density	1.14 g/cc	0.0412 lb/in³	dry; ISO 1183
DSM Novamid® 2620J PA6/6T Extrusion
Density	1.14 g/cc	0.0412 lb/in³	ISO 1183/A
Addiplast Addilene H 442 M30 Polypropylene Homopolymer High heat resistance, detergent stabilizedInformation provided by Addiplast.
Density	1.14 g/cc	0.0412 lb/in³	Latex
DuPont Performance Polymers Neoprene 622 Polychloroprene  (discontinued **) Main feature: DPHS. Principal uses include: Foam, Dipped goods, Coatings.Solids content: 61%. Initial pH: 12.5. Surface tension: 39 dyne/cm. Polymer type: High gel. Emulsifying agent: Potassium..
Density	1.14 g/cc	0.0412 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® 101F NC010 Nylon 66  (Unverified Data**) Unreinforced Polyamide 66Zytel 101F NC010 is an internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.Information provided by DuPont ..