- HOME
- POLYMER SEARCH
- Polymer Property : Density = 0.0412 lb/in³
Polymer Property : Density = 0.0412 lb/in³ Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
|
Nylene® 609 Nylon 6, Film/Extrusion Grade
Dry as molded. Film grade. Nylene 609 is a high viscosity, extrusion resin recommended for practically all types of extrusion including profile, film, and extrusion coating. It is especially recom..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
Polikim KESTOIL® Polyamide 6 + Lubricant
Kestoil® is a self-lubricated, strong, wear resistant engineering plastic with a low coefficient of friction. Implicit in its nature, it has many properties that no other material has in combinatio..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
Polykemi AB SCANMID 6 B12^ NH6 Nylon 6, Flame Retardant, Halogen Free
Information provided by Polykemi AB
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | DIN 53479 |
|
Qualchem Danamid AFEHUV Polyamide 66
Heat and UV stabilized, for long-lasting use at 120-130°C, protected against artificial lightInformation provided by Qualchem Zrt.
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | DIN 53479 |
|
Qualchem Danamid FE Polyamide 6
Standard type polyamide with good flowing propertiesInformation provided by Qualchem Zrt.
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
|
PTS Trimid® N6-200L Nylon 6 with Lube
Information provided by Polymer Technology and Services, LLC (PTS).
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | uncured |
|
Permabond TA4590 Toughened Acrylic Adhesive
Permabond TA4590 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some thermoplastics. This product was specifically designed to be non-corrosive to sen..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | DIN 53479; ASTM D792 |
|
Kolon KOPA® KN333HRN Heat Resistant Nylon 66
KOPA® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in the automobile, electrical and industrial parts.High tensile strength, outstandin..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | |
|
Meilian Chemical PE2306 BLACK MASTERBATCH
BLACK PE2306 is an economy black low density polyethylene based masterbatch containing high opacity carbon black. This product is designed for general-purpose films with high tinting strength, espec..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
SABIC Innovative Plastics Noryl V080 PPE+HIPS (Europe-Africa-Middle East)
NORYL V080 is an unfilled, flame retardant, high flow material and is halogen free according to VDE/DIN 472 part 815.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183/A |
|
Solvay TECHNYL® B 216 Natural D PA66/6, DRY
Description: Unreinforced copolyamide 66/6, medium viscosity, for injection molding.Available in: EuropeProduct Applications: TECHNYL B 216 offers an excellent combination between impact resistance,..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183/A |
|
Solvay TECHNYL® C 402 M PA6, Conditioned
Description: Unreinforced polyamide PA6, high viscosity, containing monomer, for extrusion.Available in: Europe and North AmericaProduct Applications: It is suitable for applications requiring high ..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
|
Techmer ES HiFill® PA6/6 E4 A1 Nylon 66
Availability: North AmericaForms: PelletsFeatures: High ViscosityInformation provided by TP Composites, Inc.
|
|||
| Density |
1.14
g/cc @Temperature 23.0 °C |
0.0412
lb/in³ @Temperature 73.4 °F |
ASTM D1928 |
|
Trelleborg Horda Cable E6352-A2 Bonded Semiconductive Shielding And Conductor Screen
E6352-A2 is a crosslinkable semiconductive compound based on ethylene copolymer compound, designed for conductor screen and insulation shield applications in XLPE and EPDM insulated cables with bond..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | dry; ISO 1183 |
|
DSM Novamid® 2430A PA666
Film Extrusion, Extrusion, Extrusion Grade
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
EMS-Grivory Grivory® FG 40 NL nat 6018 PA6
Information provided by EMS Grivory
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
EMS-Grivory Grivory® TSS/2 FA PA666
Product description: Grilon TSS/2 FA is an unreinforced, heat stabilized, normal viscosity PA66 + PA6 injection molding grade. Grilon TSS/2 FA has the following important properties: Excellent flow ..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
Eurostar Staramide A28N PA66, Nucleated, Injection Molding
Staramide A28K is an Unreinforced and Heat Stabilized, Polyamide 66, Injection Molding ResinInformation provided by Eurostar.
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | JIS-Z-8807 |
|
Denka LCS Z6060 Thermoplastic Elastomer, Injection Molding Grade (general)
"DENKA LCS" combines low hardness with a rubber-like texture, having a low permanent compressive distortion/permanent elongation, and is a thermoplastic elastomer that closely resembles vulcanized r..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | DAM; ISO 1183 |
|
DuPont Performance Polymers Zytel® 101L NC010 Nylon 66
(Unverified Data**)
Unreinforced Polyamide 66Zytel 101L NC010 is a lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
Eurotec® Tecomid® NA40 NL E PA6.6, unfilled, natural
Information provided by Eurotec®
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | |
|
Arkema Group Orgalloy® RS 6015 EST Nylon 6 Alloy, 18% Glass Fiber (Conditioned)
RS 60 series, rigid polyamide 6 alloy: easy to process, chemical resistance (no known solvents) and low moisture absorption leading to stability of mechanical, electrical and dimensional properties...
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
|
Aclo Accutech Polypropylene Homopolymer HP0336T30L Talc Reinforced |
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
Akro-Plastic Akromid® A3 (2414) PA 6.6 Conditioned
AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
BASF Ultramid® 1310-11 NF2001 PA66 (Dry)
Ultramid 1310-11 NF2001 is a controlled crystallization, fast cycling PA6/6 which provides extremely fast cycle times and improved productivity over Ultramid 1000.
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | |
|
Axion Polymers Axplas® PS07 0000 General Purpose Polystyrene
PS07 Series polystyrenes offers the designer and processor a high performance polymer with well-defined properties in a range of options to suit many applications.The Axpoly® PS07 range of resin co..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
|
BASF Elastollan® 1195A Polyether Type Polyurethane Elastomer
Processed by extrusion or injection molding. Elastollan ® 1100 series products are FDA Sec. 177.2600 compliant. Elastollan 1100 series of products are polyether-based thermoplastic polyurethanes...
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
|
Multibase Multi-Flam™ 0103 HDPE NH Polyethylene
Features:Flame RetardantHalogen Content, Low to None Forms:PelletsProcessing Methods:Injection MoldingCoextrusionExtrusionUses:TubingPipingInformation provided by Multibase
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 |
|
LATI LATISHIELD 90/13-07A-V1 Modified Polyphenylene Oxide (PPOm) Base E.M.I. Shielding Plastic (UL94 V-1)
(di
Description: Latishield E.M.I. shielding materials were developed to solve the problem of shielding electromagnetic interferences with plastic components. The answer is a mixture of two different ty..
|
|||
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183/A |
|
Addiplast Addilene J 326 V30 Polypropylene Copolymer
High modulus, high durabilityInformation provided by Addiplast.
|
|||
Copyright © lookpolymers.com All Rights Reserved