Songhan Plastic Technology Co.,Ltd.

Styron Magnumâ„¢ 9015 ABS, High Gloss

Category Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded
Manufacturer Styron
Trade Name Magnum™
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Styron Magnumâ„¢ 9015 ABS, High Gloss.pdf
  Online Service   lookpolymers   27660005
Material Notes:
MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resin are available in a wide range of melt flow rates, impact strength and heat resistance for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion and thermoforming.The MAGNUM 9000 series of high gloss ABS resins are designed to offer a wide range of impact strengths and melt flow rates to meet the needs of the durables injection molding markets. The 9000 series products offer typical Izod impact strength values from 210 to 400 J/m and melt flow rates ranging from 2.5 to 7.0 g/10min. The gloss values are typically greater than 95% on the 60. Gardner scale for the highest gloss resins and greater than 90% for those products having a broader range of gloss.MAGNUM® 9015 ABS resin is a high flow, high gloss grade for complex molded parts with thin walls or long flow lengths offering reduced viscosity without sacrificing the toughness, heat resistance or chemical resistance you expect from an ABS resin.Data provided by Dow Chemical.This product line was spun off from Dow Chemical to Styron in 2010.
Physical Properties Metric English Comments
Density 1.04 g/cc
0.0376 lb/in³
Linear Mold Shrinkage 0.0055 cm/cm
0.0055 in/in
Melt Flow 12 g/10 min

@Load 3.80 kg,
Temperature 230 °C
12 g/10 min

@Load 8.38 lb,
Temperature 446 °F
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 35.2 MPa
5110 psi
Tensile Strength, Yield 43.4 MPa
6290 psi
Elongation at Break 45 %
45 %
Tensile Modulus 2.41 GPa
350 ksi
Izod Impact, Notched 2.14 J/cm
4.01 ft-lb/in
Impact Test 22.6 J

@Temperature 23.0 °C
16.7 ft-lb

@Temperature 73.4 °F
Instrumented Dart Total Energy
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 93.3 °C
200 °F
Unannealed; ASTM Data
Deflection Temperature at 1.8 MPa (264 psi) 79.4 °C
175 °F
Unannealed; ASTM Data
Vicat Softening Point 110 °C
230 °F
Flammability, UL94 HB

@Thickness 1.60 mm

@Thickness 0.0630 in
Optical Properties Metric English Comments
Gloss 96 %
96 %
Gardner Gloss, 60°
Copyright © All Rights Reserved