Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Plastcom SLOVALEN PH 52 T 20 PP, 20% mineral filling FeaturesModified homopolymer PP for injection moulding with the content of 20% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc conte nt. Decreased sh.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Polimeri Europa Edistir R 850E Polystyrene Super high impact polystyrene with good heat resistance. Designed for sheet extrusion and thermoforming of deep drawn containers even
diluted with high percentage of GP. Suitable for general injecti.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Polykemi AB POLYabs SS0 ABS, High Flow Information provided by Polykemi AB |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Ineos Nova 3700 General Purpose Crystal Polystyrene
(discontinued **) Good balance of flow and strength, Good crack resistanceApplications: Single service wares, Blending resinExposure to gamma radiation in the 2.02-6.06 megarad range has no significant effect on the .. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Ineos Nova 6200 Super High Impact Polystyrene Good toughness, Deep draw, Easy processing using all conventional methodsApplications: Thermoformed and molded packaging, Drink cups and lids, Structural foam, Custom sheetProperties were determined.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Ineos Styrenics Avantra® 597N Polystyrene (NAFTA) High-impact grade of polystyrene with improved impact strength and heat resistance, developed for injection molding and extrusion/thermoforming applications.Information provided by BASF.Ineos Styren.. |
|||
Density | 1.04 g/cc @Temperature 23.0 °C |
0.0376 lb/in³ @Temperature 73.4 °F |
ISO 1183 |
Inno-Comp INNOPOL® CS 1-3120 B DEL 20% Talc Filled Polypropylene Homopolymer INNOPOL® CS 1-3120 B DEL is developed for producing injection molded automotive components.All information provided by INNO-COMP. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Ineos ABS Lustran® ABS E112LG Pellets Lustran® ABS E112LG is extrusion grade for low gloss surfaces. It is used for the production of molded plastic articles. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Momentive Performance Materials RTV5818 Translucent Adhesive Sealant, Fast Cure Paste One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: Fast-curing primerless adhes.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
LyondellBasell Hostacomâ„¢ BR712GC Polypropylene Copolymer Description: Hostacomâ„¢ BR712GC conventional melt flow, 1,300 MPa flexural modulus, UV-stabilized, mineral-filled polypropylene copolymer has an excellent balance of stiffness, impact and weathe.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Shuman 710 Utility Black ABS Good impact strength, easy processability, good chemical resistance, good wear and abrasion resistance.Data provided by the manufacturer. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D 792 |
Styrolution PS 1621 GPPS Easy flow material with excellent moldabilityExcellent clarity and set-up timeInformation provided by Styrolution |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D 792 |
Styrolution PS 5600/5601 HIPS Fine balance of toughness and rigidityGood processabilityUSP Class VI certifiedUL Classification 94 HBInformation provided by Styrolution |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Styrolution Terluran® GP-22 ABS Terluran GP-22 is an easy flowing grade of ABS for injection molding with high resistance to impact and heat deflection.Information provided by STYROLUTION, which is a joint venture between BASF and.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Styron MAGNUMâ„¢ 3325 MT Acrylonitrile Butadiene Styrene (ABS) Resin Overview: MAGNUMâ„¢ 3325 MT is a resin with excellent processing characteristics and matt surface finish. The mass (continuous process) ABS technology of Styron ensures an ABS resin that combines.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM Data |
Styron Magnum™ 541 ABS, High Impact MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM .. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D 792 |
Styrolution Clearblend 165 MBS CLEARBLEND 165 is an impact modified styrene acrylic copolymer blend with excellent clarity and outstanding toughness.Exceptional toughnessLow densityEase of processingLow moisture absorptionInforma.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM Data |
Styron Magnum™ 341 ABS, Low Gloss MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM .. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | DIN 53479 |
Polyram RamLloy PJ701 ABS/ASA, General Purpose PJ 701 IS A GENERAL PURPOSE INJECTION MOLDING ASA& ABS ALLOY . IT HAS GOOD MECHANICAL PROPERTIES SIMILAR TO ABS AND MUCH BETTER WEATHER RESISTANCE. AN IDEAL ECONOMIC CHOICE.Information provided .. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Eliokem Chemigum® P615D Nitrile Elastomer Medium viscosity grade for friction materials. 33% bound ACN. Linear polymer structure. CaCO3 partitioning agent.Can be used in phenolic blends.Used in friction materials such as disc-pads, clutc.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Eurotec® Tecomid® NB40 NL IH PA 6 impact modified Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO R1183 |
Arkema Group Orgalloy® LE 60 ES Polyamide Alloy Polyamide Alloy, Blow Molding of Technical PartsInformation provided by Arkema Group |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Aclo Accutech Polypropylene Homopolymer HP0339W20L1 Wollastonite Reinforced |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183/A |
Addiplast Addilene J 220 M20 Polypropylene Copolymer Mineral reinforced, improved rigidityInformation provided by Addiplast. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
BiologiQ ESR-PE EcoStarch mLLDPE Blend Properties of 70% mLLDPE, 25% ESR, 5% additive blend - thin filmInformation provided by BiologiQ |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Techmer ES Plastiblend® ABS 922 NAT Availability: North AmericaForms: PelletsInformation provided by TP Composites, Inc. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Polyram RamShine PAS703 ASA, UV Stabilized Is a general purpose injection molding ASA, good chemical resistance, UV stabilization.Information provided by Polyram. |
|||
Density | 1.04 - 1.23 g/cc | 0.0376 - 0.0444 lb/in³ | Average value: 1.17 g/cc Grade Count:9 |
Overview of materials for Polypropylene with Glass Fiber + Bead Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with Glass Fiber + Bead Filler". Each property range of values reported is minimum and max.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
CENTROPLAST CENTROLEN PP LF Polypropylene conductive This material is a low density, easily machined plastic that can be welded and has good surface conductivity. Applications include filter heads and housings, conveyor equipment for flammable liquid.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Solvay MACKAM® CB-35 Surfactant Product Description: Mackam CB-35 is an alkyl betaine that finds uses in industrial applications as well as well as personal care products. Mackam CB-35 is stable at acid /alkaline pH and with hypoc.. |