Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 12 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 12 g/10 min

@Load 0.325 kg,
Temperature 270 °C
12 g/10 min

@Load 0.716 lb,
Temperature 518 °F
Plastcom SLOVALEN PH 63 T 20 PP, 20% mineral filling
FeaturesModified homopolymer PP for injection moulding with the content of 20% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc conte nt. Decreased sh..
Melt Flow 12 g/10 min

@Load 0.325 kg,
Temperature 270 °C
12 g/10 min

@Load 0.716 lb,
Temperature 518 °F
Plastcom SLOVALEN PQ 83 T 20 PP, 20% mineral filling
FeaturesModified PP for injection moulding with the content of 20% mineral filling, uv stabilized. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased ..
Melt Flow 12 g/10 min

@Load 6.60 kg,
Temperature 400 °C
12 g/10 min

@Load 14.6 lb,
Temperature 752 °F
ASTM D1238
SABIC Innovative Plastics EXTEM UH1016 TPI Blend (Europe-Africa-Middle East)
High heat amorphous TPI Blend, Chemical Resistant, High Flow
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 260 °C
12 g/10 min

@Load 4.76 lb,
Temperature 500 °F
ASTM D1238
Kingfa JH960 6111 Non-halogenated Flame Retardant PC/ABS Alloy
Features:Halogen free flame retardant, V-0/1.5mm5VB/1.6mm, 5VA/3.2mmExcellent mechanical propertiesHigh heat resistanceChemical resistance, hydrolysis resistanceGood paint adhesionHigh flow ability,..
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Ineos H12E-00 Polypropylene Homopolymer, Antistatic
An antistated polypropylene homopolymer produced by Ineos utilizing catalyst technology.It is designed for injection molding and general purpose extrusion. This material meets the Food and Drug Adm..
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Multibase Multi-Flex® D 4400 TPE Thermoplastic Elastomer
Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHeat StabilizedOzone ResistantProcessability, GoodUV Resistance, Good F..
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Multibase Multi-Flex® 8832 C Black TPE Thermoplastic Elastomer
Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase
Melt Flow 12 g/10 min

@Load 10.0 kg,
Temperature 250 °C
12 g/10 min

@Load 22.0 lb,
Temperature 482 °F
ASTM D1238
Samsung Cheil Industries Infino® LS-3302 PC, 30% Glass Filled High Impact
High-impact resistant PC/GF with 30% GF reinforcement for camera body tubeInformation provided by Samsung Cheil Industries.
Melt Flow 12 g/10 min

@Load 10.0 kg,
Temperature 220 °C
12 g/10 min

@Load 22.0 lb,
Temperature 428 °F
ASTM D1238
Samsung Cheil Industries Starex® LX-0957 ABS, Unreinforced Metallic-Look
Luminous Grade - gives aesthetics of a painted surface without painting. Reduces time, cost, and environmental hazards (such as soilvents).Information provided by Samsung Cheil Industries.
Melt Flow 12 g/10 min

@Load 10.0 kg,
Temperature 220 °C
12 g/10 min

@Load 22.0 lb,
Temperature 428 °F
ASTM D1238
Samsung Cheil Industries Starex® LX-0987EXS ABS, Unreinforced Metallic-Look
Luminous Grade - gives aesthetics of a painted surface without painting. Reduces time, cost, and environmental hazards (such as soilvents).Information provided by Samsung Cheil Industries.
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Borealis Borcom™ WE007AE Polypropylene
Borcom™ WE007AE is a polypropylene microcomposite intended for injection molding. The product is available in natural color. This material has an excellent balance between impact strength and stif..
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 190 °C
12 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Grey 8760 Concentrate Based In Polyethylene
DescriptionPOLYBATCH® 8760 is a grey color concentrate based in polyethylene. This concentrate was designed to provide opacity and color in polyolefin film and molding applications. POLYBATCH® 8..
Melt Flow 12 g/10 min

@Temperature 230 °C
12 g/10 min

@Temperature 446 °F
I<sub>2</sub>; ASTM D1238
Formosa Plastics Formolene® 5140N Homopolymer Polypropylene
Homopolymer for Injection Molded Applications Formolene 5140N is a highly isotactic, polypropylene homopolymer with fast cycle time and improved mold release. It has use in injection molded applicat..
Melt Flow 12 - 20 g/10 min
12 - 20 g/10 min
300/1.2; May be specified; ASTM D1238
Plastics Group Polifil® GFPC-40 40% Glass-Reinforced Polycarbonate
Polifil® GFPC series compounds offer a combination of improved dimensional stability and decreased flammability. The excellent balance of physical properties make the Polifil® glass-filled polycar..
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Borealis HE365FB Polypropylene
HE365FB is a polypropylene homopolymer intended for fiber applications. Applications: continuous filaments, and staple fiber. HE365FB Gas fading free formulation contains antioxidant and UV stabil..
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 190 °C
12 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Green 30424 Concentrate Based In Polyethylene
DescriptionPOLYBATCH® 30424 is a green color concentrate based in polyethylene. This concentrate was designed to provide color in blow molding and injection molding applications. POLYBATCH® 3042..
Melt Flow 12 g/10 min
12 g/10 min
ASTM D1238
A. Schulman POLYFORT™ FXP 2779U UV Stabilized Copolymer Polypropylene
DescriptionPolyfort® FXP 2779U is a 20% talc-filled, UV stabilized copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 12 - 15 g/10 min
12 - 15 g/10 min
ISO 1133
Chengdu Polyster H6055 Thermoplastic Polyether-ester Elastomer (TPEE)
Medium modulus molding and injection grade. Contains improved color- stable antioxidants. Higher melt flow index compared with other grades; good balance of modulus and toughness. Applications requi..
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 190 °C
12 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
DuPont Performance Polymers Delrin® 500T BK602 Acetal (POM)  (Unverified Data**)
Toughened Medium Viscosity Acetal Homopolymer Delrin 500T BK602 is a toughened medium viscosity acetal homopolymer resin with impact resistance similar to Delrin 100. It can be used in parts requiri..
Melt Flow 12 g/10 min
12 g/10 min
ASTM D1238
Aclo Accucomp Polyethylene HD0205L High Density
Melt Flow 12 g/10 min
12 g/10 min
ASTM D1238
Aclo Accutech Polypropylene Copolymer CP0436W10L Wollastonite Reinforced
Melt Flow 12 g/10 min
12 g/10 min
ASTM D1238
Aclo Accutech Polypropylene Homopolymer HP0336M10L Mica Reinforced
Melt Flow 12 g/10 min
12 g/10 min
ASTM D1238
Aclo Accutech Polypropylene Homopolymer HP0336T30L1 Talc Reinforced
Melt Flow 12 g/10 min
12 g/10 min
ASTM D1238
Buckeye Polymers BP RPP 3012 C Polypropylene, 30% Mineral Filled
Applications:Outdoor FurnitureCalcium carbonate-filled PP grades have a high impact toughness, moderate increased stiffness, and excel in high gloss applications. This material can be customized thr..
Melt Flow 12 g/10 min

@Load 3.80 kg,
Temperature 230 °C
12 g/10 min

@Load 8.38 lb,
Temperature 446 °F
ASTM D-1238
Plaskolite West Optix® CP - 927 GHF High Impact Acrylic Resin
Optix® impact-modified grades exhibit 7 to 10 times the impact strength of general purpose grades and maintaining the superior optical properties. Each grade is offered in a grade(G) that resists g..
Melt Flow 12 - 20 g/10 min
12 - 20 g/10 min
ASTM D1238
A. Schulman POLYFORT™ FPP 1200H High Flow, Calcium Carbonate Fortified Homopolymer Polypropylene
DescriptionPolyfort® FPP 1200H is a high flow 40% calcium carbonate fortified homopolymer polypropylene.Information provided by A. Schulman.
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
BP Amoco Accpro® 9433 Enhanced Polypropylene  (discontinued **)
Suggested fabrication methods: Injection moldingFeatures: High stiffness, Surface hardness, Stain resistance, Antistatic, NucleatedComplies with FDA specification, Title 21, CFR 177.1520.Typical app..
Copyright © lookpolymers.com All Rights Reserved