Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Quadrant EPP Durapro® Truck Liners (ASTM Product Data Sheet)

Category Polymer , Thermoplastic , Polyethylene (PE) , HDPE
Manufacturer Quadrant Engineering Plastics Products
Trade Name Durapro®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Quadrant EPP Durapro® Truck Liners (ASTM Product Data Sheet).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Physical Properties Metric English Comments
Specific Gravity 0.940 g/cc
0.940 g/cc
ASTM D792
Water Absorption <= 0.010 %
<= 0.010 %
Immersion, 24hr; ASTM D570(2)
Water Absorption at Saturation <= 0.010 %
<= 0.010 %
ASTM D 570(2)
Mechanical Properties Metric English Comments
Hardness, Shore D 67
67
ASTM D2240
Tensile Strength 32.4 MPa
4700 psi
ASTM D638
Elongation at Break 200 %
200 %
ASTM D638
Tensile Modulus 0.565 GPa
82.0 ksi
ASTM D638
Flexural Strength 23.4 MPa
3400 psi
ASTM D790
Flexural Modulus 0.607 GPa
88.0 ksi
ASTM D790
Compressive Strength 19.3 MPa
2800 psi
10% Def.; ASTM D695
Compressive Modulus 0.452 GPa
65.5 ksi
ASTM D695
Shear Strength 62.1 MPa
9000 psi
ASTM D732
Izod Impact, Notched 18.69 J/cm
35.00 ft-lb/in
ASTM D256
Coefficient of Friction, Dynamic 0.080
0.080
dry vs. steel; QTM55007
Sand Slurry 15
15
1018 steel = 100; ASTM D4020
Limiting Pressure Velocity 0.0701 MPa-m/sec
2000 psi-ft/min
4:1 safety factor applied; QTM 55010
Abrasion 130
130
Sand Wheel; TIVAR® 1000 = 100; ASTM G-65
Thermal Properties Metric English Comments
CTE, linear 234 µm/m-°C

@Temperature -40.0 - 150 °C
130 µin/in-°F

@Temperature -40.0 - 302 °F
ASTM E831
Melting Point 135 °C
275 °F
Crystalline, Peak; ASTM D3418
Maximum Service Temperature, Air 82.2 °C
180 °F
Continuous
Deflection Temperature at 1.8 MPa (264 psi) 46.7 °C
116 °F
ASTM D648
Flammability, UL94 HB

@Thickness 3.17 mm
HB

@Thickness 0.125 in
Electrical Properties Metric English Comments
Surface Resistivity per Square 1e+13 - 1e+15 ohm
1e+13 - 1e+15 ohm
EOS/ESD S11.11
Dielectric Constant 2.3

@Frequency 1.00e+6 Hz
2.3

@Frequency 1.00e+6 Hz
ASTM D150
Dissipation Factor <= 0.00050

@Frequency 1.00e+6 Hz
<= 0.00050

@Frequency 1.00e+6 Hz
ASTM D150
Compliance Properties Metric English Comments
3A-Dairy No
No
Canada AG No
No
FDA No
No
NSF No
No
USDA No
No
USP Class VI No
No
Chemical Resistance Properties Metric English Comments
Acids, Strong (pH 1-3) Acceptable
Acceptable
Acids, Weak Acceptable
Acceptable
Alcohols Acceptable
Acceptable
Alkalies, Strong (pH 11-14) Acceptable
Acceptable
Alkalies, Weak Acceptable
Acceptable
Chlorinated Solvents Unacceptable
Unacceptable
Conductive / Static Dissipative No
No
Continuous Sunlight Limited
Limited
Hot Water / Steam Limited
Limited
Hydrocarbons - Aliphatic Unacceptable
Unacceptable
Hydrocarbons - Aromatic Unacceptable
Unacceptable
Inorganic Salt Solutions Acceptable
Acceptable
Ketones, Esters Unacceptable
Unacceptable
Copyright © lookpolymers.com All Rights Reserved