Polymer Property : Specific Gravity = 0.940 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Specific Gravity	0.940 g/cc	0.940 g/cc	23/23°C; ASTM D792
RheTech Products FT2202-732UV Thermoplastic Polyolefin, UV Stabilized, YGYA Black Applications: Box top railTail gate linerExterior trimInjection molding conditions reported in table.Information provided by RheTech Products.
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
Polimeri Europa Europrene® SOL T 6302 Styrene - Butadiene Block Copolymer Europrene® SOL T 6302 is a linear block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene, where bound styrene is 30% weight. A non-staining antioxidant ..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
Quadrant EPP TIVAR® 1000 EC Electrically Conductive UHMW (ASTM Product Data Sheet)
Specific Gravity	0.940 g/cc	0.940 g/cc
KratonÂ® D1101 J (SBS) Liner Block Copolymer Description: Kraton D1101 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Japan in the physical form(s) outlined in the follow..
Specific Gravity	0.940 g/cc	0.940 g/cc	ISO 2781
KratonÂ® D1102 E (SBS) Liner Block Copolymer Description: Kraton D1102 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It is supplied from Europe in the physical form(s) identified below in..
Specific Gravity	0.940 g/cc	0.940 g/cc
KratonÂ® D1116 (SB)n Branched Copolymer (SB)n - styrene-butadiene multi-arm (branched) copolymer. KRATONÂ® Polymers require no premastication or vulcanization. They can be blended with thermoplastic polymers and significantly improve ..
Specific Gravity	0.940 g/cc	0.940 g/cc	ISO 2781
KratonÂ® D1124 B (SIS) Branched Triblock Copolymer Description: Kraton D1124 B is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from South America in the physical form identified..
Specific Gravity	0.940 g/cc	0.940 g/cc	ISO 2781
KratonÂ® D1184 A (SBS) Branched Block Copolymer Description: Kraton D1184 A is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms identified as follows..
Specific Gravity	0.940 g/cc	0.940 g/cc	ISO 2781
KratonÂ® D1189 A (SBS) Radial Block Copolymer Description: Kraton D1189 A is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied from Europe in the physical forms indicated in the grade ..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D4025
KratonÂ® D1116 K (SBS) Radial Triblock Copolymer Description: Kraton D1116 K is a clear, radial triblock copolymer based on styrene and butadiene, with a polystyrene content of 23%. It is supplied from North America in the physical form identified..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D4025
KratonÂ® D1133 K (SBS) Linear Triblock Copolymer Description: Kraton D1133 K is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 36%. It is supplied from North America in the physical form identified..
Specific Gravity	0.940 g/cc @Temperature 25.0 Â°C	0.940 g/cc @Temperature 77.0 Â°F
Multibase Dow CorningÂ® MB50-002 Siloxane Additive DOW CORNING MB50-002 Masterbatch is a pelletized formulation containing 50% of an ultra-high molecular weight siloxane polymer dispersed in polyethylene (LDPE) homopolymer. It is designed to be used..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP293 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring excellent low temperature impact properties with good dim..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
Teknor Apex Telcar® TL-6085 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets ..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
Teknor Apex Telcar® TL-6800-64 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets ..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
Teknor Apex Uniprene® UN-1069A Thermoplastic Elastomer Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP293 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring excellent low temperature impact properties with good dim..
Specific Gravity	0.940 g/cc	0.940 g/cc	ISO 1183/1
A. Schulman FORMION™ FI 391 Ionomer DescriptionFormion® FI 391 is a non-reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, low temperature ductility, and medium stiffness. Formion F1 391U i..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
A. Schulman POLYTROPE™ TPP 293 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP293 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring excellent low temperature impact properties with good dim..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
A. Schulman POLYBATCH™ AF-1085 Antifog Concentrate DescriptionPOLYBATCH® AF-1085 is a 10% antifog concentrate based in LDPE. This concentrate is designed to provide excellent antifog performance in polyethylene film applications ranging from meat ..
Specific Gravity	0.940 g/cc	0.940 g/cc
Zeon Chemicals Nipol® DN401L Nitrile Elastomer Nipol DN401L is a copolymer of butadiene and acrylonitrile. The extremely low acrylonitrile content is designed for the maximum in low temperature performance. Sufficient antioxidant is added during..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D 792
Zylog Neoplast® 155 FT EB Thermoplastic Vulcanizate Neoplast 155 FT EB is a soft, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Molding and Extrusion applications.RoHS Compliant, ..
Specific Gravity	0.940 g/cc	0.940 g/cc
ExxonMobil EXXPRO™ 3745 High Cure Activity Grade Exxpro Elastomer is a brominated copolymer of isobutylene and paramethylstyrene. The product form is off whtie to amber bales.Information provided by ExxonMobil Chemical
Specific Gravity	0.940 g/cc	0.940 g/cc	DIN 53479
Dynasol Solprene® 4316 Thermoplastic Rubber (SBS) Solprene 4316 is a radial styrene/butadiene block copolymer with 30% styrene content, most of it forming a polystyrenes block which gives the polymer a thermoplastic behavior. It develops propertie..
Specific Gravity	0.940 g/cc	0.940 g/cc	DIN-53479
Dynasol Solprene® 416 Thermoplastic Rubber SBS Dry Solprene 416 is a radial styrene/butadiene block copolymer having 30% of styrene content, most of it forming a polystyrenes block which gives the polymer a thermoplastic behavior. It develops proper..
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
A. Schulman POLYBATCH™ AC-20531L UV Absorber Concentrate DescriptionPOLYBATCH® AC-20531L is a UV absorber concentrate containing 20% active additive based in low density polyethylene. POLYBATCH® AC-20531L is designed for use in polyethylene blown and c..
Specific Gravity	0.940 g/cc	0.940 g/cc
Shin-Etsu Silicones Primer Z Elastomer Pimer Z is a primer designed for fluorosilicone to metal and plasticsInformation Provided by Shin-Etsu Silicones of America, Inc.
Specific Gravity	0.940 g/cc	0.940 g/cc	ASTM D792
LyondellBasell DEXFLEX® 711 TPO Description: DEXFLEX® 711 is a thermoplastic olefinic elastomer compounded with post-industrial/post-consumer recycled materials. It is designed for use in applications that are (non-color matched..