DuPont Performance Polymers Zytel® EFE1068 NC010T Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer	DuPont Performance Polymers
Trade Name	Zytel®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® EFE1068 NC010T Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Unreinforced Polyamide 66Zytel EFE1068 NC010T is a lubricated polyamide 66 for injection molding. It has excellent flow characteristics and was developed for fast production cycles and high productivity applications.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	0.950 g/cc	0.0343 lb/in³
	1.14 g/cc	0.0412 lb/in³	DAM; ISO 1183
Water Absorption	8.5 % @Thickness 2.00 mm	8.5 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	2.80 % @Thickness 2.00 mm	2.80 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Linear Mold Shrinkage, Flow	0.015 cm/cm	0.015 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.015 cm/cm	0.015 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	59.0 MPa	8560 psi	50%RH; ISO 527-1/-2
	84.0 MPa	12200 psi	DAM; ISO 527-1/-2
Elongation at Break	18 %	18 %	DAM; Nominal; ISO 527-1/-2
	>= 50 %	>= 50 %	50%RH; Nominal; ISO 527-1/-2
Elongation at Yield	4.5 %	4.5 %	DAM; ISO 527-1/-2
	25 %	25 %	50%RH; ISO 527-1/-2
Tensile Modulus	1.50 GPa	218 ksi	50%RH; ISO 527-1/-2
	3.00 GPa	435 ksi	DAM; ISO 527-1/-2
Izod Impact, Notched (ISO)	5.00 kJ/m²	2.38 ft-lb/in²	DAM; ISO 180/1A
	10.0 kJ/m²	4.76 ft-lb/in²	50%RH; ISO 180/1A
Charpy Impact Unnotched	NB	NB	DAM; ISO 179/1eU
	NB	NB	50%RH; ISO 179/1eU
Charpy Impact, Notched	0.500 J/cm²	2.38 ft-lb/in²	DAM; ISO 179/1eA
	1.20 J/cm²	5.71 ft-lb/in²	50%RH; ISO 179/1eA

Thermal Properties	Metric	English	Comments
Specific Heat Capacity	2.79 J/g-°C	0.667 BTU/lb-°F
Thermal Conductivity	0.140 W/m-K	0.972 BTU-in/hr-ft²-°F	of melt
Melting Point	263 °C	505 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	200 °C	392 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	70.0 °C	158 °F	DAM; ISO 75-1/-2
Vicat Softening Point	257 °C	495 °F	DAM; 50°C/h 50N; ISO 306
Flammability, UL94	V-2 @Thickness 1.50 mm	V-2 @Thickness 0.0591 in	DAM; IEC 60695-11-10
	V-2 @Thickness 0.700 mm	V-2 @Thickness 0.0276 in	DAM; IEC 60695-11-10
Oxygen Index	24 %	24 %	DAM; ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	DAM; IEC 60093
Dielectric Strength	27.0 kV/mm	686 kV/in	DAM; IEC 60243-1
Dissipation Factor	0.010 @Frequency 100 Hz	0.010 @Frequency 100 Hz	DAM; IEC 60250
	0.010 @Frequency 1.00e+6 Hz	0.010 @Frequency 1.00e+6 Hz	DAM; IEC 60250
Comparative Tracking Index	600 V	600 V	DAM; IEC 60112

Descriptive Properties	Value	Comments
Additives	Lubricants
	Release agent
Delivery Form	Pellets
Part Marking Code	>PA66<	ISO 11469
Processing	Injection Moulding
Regional Availability	Europe
	Near East/Africa
Resin Identification	PA66

Users viewing this material also viewed the following: