Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 0.46 MPa (66 psi) = 200 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
ISO 75
Nilit FRIANYL B63 H-KV30 Nylon 6 for injection molding, 30% glass ball reinforced
Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
120°C/h; ISO 75/1
Polykemi AB SCANAMID 66 A32^E Nylon 66, Modified
Information provided by Polykemi AB
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
DIN 53461
Qualchem Danamid FGF-15 Polyamide 6, 15% Glass Fiber
Reinforced with glass fiber.Information provided by Qualchem Zrt.
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
DIN 53461
Qualchem Danamid FGF-50 Polyamide 6, 50% Glass Fiber
Reinforced with glass fiber.Information provided by Qualchem Zrt.
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Radici Radilon® A CV300LK (dry) Nylon 66
Radilon® A is a range of polyamide 66 (PA66) products obtained through the polymerization of hexamethylendiamine and adipic acid, and used for injection, extrusion and blow-molding.Information prov..
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Radici Radilon® S RCV3015 (dry) Nylon 6
Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group.
Deflection Temperature at 0.46 MPa (66 psi) >= 200 °C
>= 392 °F
Injection; ISO 75-B
Raschig Group EPOXIDUR® 3580 EP Epoxy
Glass-fiber reinforced and mineral filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties even with thin wall thicknesses and high temperatures. This prod..
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Unannealed; ISO 75-2/B
PolyOne Bergamid™ A700 TM-YF Polyamide 66 (Nylon 66)
Information provided by PolyOne
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
DAM; ISO 75-1/-2
DuPont Performance Polymers Zytel® 101L BKB080 Nylon 66  (Unverified Data**)
Zytel® 101L BKB080 is a lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
ISO 75-1/-2
Aardvark Polymers Aarlon® 2000 Rotational Molding Resin, DAM
Aarlon® 2000 PA 6/6 is a high performance nylon for rotational molding applications. Aarlon® 2000 offers high heat capabilities with exceptional mechanical properties.Information provided by G..
Deflection Temperature at 0.46 MPa (66 psi) 200 °C

@Thickness 6.40 mm
392 °F

@Thickness 0.252 in
Unannealed; ASTM D648
LG Chemical Lupox® SG3250A PBT+PET+MF25%
Description: Injection Molding, PBT+PET+MF25%, Good SurfaceApplication: Automotive (Head Lamp Bezel)CAS No. 24968-12-5, 25038-59-9 and 14807-96-6Information provided by LG Chemical
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
ASTM D1525, HDT Method B
Loxim 330 01HSL Nylon 6
Information provided by Loxim Industries
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
V-notch; ISO R 75
Schwartz Technical Plastics LAMIGAMID® 300 Cast Polyamide 6, Conditioned
Application: slippers and center blocks for heavy rolling mills, outrigger floatsInformation provided by Schwartz Technical Plastics GmbH
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
V-notch; ISO R 75
Schwartz Technical Plastics LAMIGAMID® 307 Cast Polyamide 6, Heat Stabilized, Conditioned
Application: slippers, inserts for coupling boxesInformation provided by Schwartz Technical Plastics GmbH
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics Ultem 1010RF PEI
Enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming. US FDA and EU Food Contact Compliant in recognized colors.This data was supplied by SABIC-IP for the Americas reg..
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics ULTEM 1100 PEI (Europe-Africa-Middle East)
Standard flow Polyetherimide (Tg 217C). UL94 V0, V2 and 5VA listing.
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics Ultem 1100R PEI (Europe-Africa-Middle East)
Standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics ULTEM 9011 PEI
Transparent, high flow Polyetherimide (Tg 217C). ECO Conforming. Improved processability for Fiber extrusion.
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics ULTEM 1000E PEI (Europe-Africa-Middle East)
Transparent, standard flow Polyetherimide (Tg 217C) with internal mold release. Resin is RoHS compliant. US FDA and EU Food Contact compliant.
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics ULTEM 1000P PEI (Europe-Africa-Middle East)
Standard flow Polyetherimide (Tg 217C) in 350 micron powder. Resin is RoHS compliant.
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
ISO 75
Polyram PlusTek PA201 Nylon 66 for Extrusion
High viscosity Nylon 66 for extrusion applications.Information provided by Polyram.
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
ISO 179
CP-Polymer-Technik Wellamid® 6000 MF 30 HWCP 30% Milled Glass Fiber Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
ISO 179
CP-Polymer-Technik Wellamid® 6000/52 GV 15 HWUVCP 15% Glass Fiber Nylon 6, Low Temperature Impact Modified, UV Stabilized, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
DAM; ISO 75-1/-2
DuPont Performance Polymers Zytel® 101 NC010 Nylon 66  (Unverified Data**)
Unreinforced Polyamide 66Zytel 101 NC010 is a general purpose polyamide 66 resin for injection molding and extrusion.Information provided by DuPont Performance Polymers
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
ISO 75
Eurotec® Tecomid® NB40 NL FN70 PA6, unfilled, flame retardant - halogen free (RoHS compliant), natural
Information provided by Eurotec®
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
Average value: 200 °C Grade Count:4
Overview of materials for Epoxy, Molded, Glass Fiber Filler
This property data is a summary of similar materials in the MatWeb database for the category "Epoxy, Molded, Glass Fiber Filler". Each property range of values reported is minimum and maximum values..
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
392 °F
DIN 53461; ASTM D648
Kolon Kopa® KN153G15 Nylon 6 Resin
KOPA is widely used in the automobile and industrial parts.General KOPA N-6 Features: Good mechanical properties, Extreme toughness, Outstanding self-lubrication and abrasion resistance, Excellent c..
Deflection Temperature at 0.46 MPa (66 psi) 200 °C

@Thickness 3.20 mm
392 °F

@Thickness 0.126 in
Unannealed; ASTM D648
LNP ULTEM® JD7904 Polyetherimide  (discontinued **)
Forms: PelletsInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase..
Copyright © lookpolymers.com All Rights Reserved