Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Modulus | 1.50 GPa | 218 ksi | STN EN ISO 527-2 |
Plastcom PLASTALEN® PH 91 SD Polypropylene Modified homopolymer PP for injection molding. General use in all industry branches. Delivered in natural mode and in the full RAL color scale.Information Provided by Plastcom spol. s r.o. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | |
Plastcom SLOVALEN PC 63 T 15-1M PP, 15% mineral filling FeaturesModified PP copolymer for injection moulding with the content of 15 % mineral filler, uv stabilized, good scratch resistance, low odor and very good flowability with good dimensional stabili.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | STN EN ISO 527-2 |
Plastcom SLOVALEN PH 78 FRT 5 Polypropylene Homopolymer, Halogen Free and Phosphor Free Flame Retardant FeaturesModified homopolymer PP for injection moulding, contains the modifier of mechanical properties and non halogen and free phosphor flame retardant. Increased strength in comparison with unfil.. |
|||
Tensile Modulus | 1.50 GPa @Temperature 23.0 °C |
218 ksi @Temperature 73.4 °F |
ISO 527-2/1 |
PolyOne Bergamid™ B700 UF Polyamide 6 (Nylon 6) Information provided by PolyOne |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | |
Plastcom SLOVALEN PC 93 T 5 PP reinforced with 5% mineral filler Features: Modified PP for injection moulding with the content of 5% mineral filling. Increased rigidity, strength and thermal. Decreased shrinkage. General application in all industry branches.Packa.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ASTM D638 |
Shell Carilon® D26VM100 Polyketone, High-Flow Injection Molding Grade
(discontinued **) Shell announced in Feb. 2000 that the Carilon product line is being discontinued. CARILON Polymer D26VM100 is a high-flow injection molding grade with mechanical properties which classify it as an .. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527-1/-2 |
DSM Akulon® S223-E Nylon 66 (European and Asian Grade) (Cond)
(discontinued **) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier .. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | 1 mm/min; ISO 527-1,-2 |
Inno-Comp INNOPOL® CS 2-3120 TO 20% Talc Filled Polypropylene Block-Copolymer INNOPOL® CS 2-3120 TO is a 20% talc-filled compound based on polypropylene block-copolymer. This grade is available in nature and custom colored form.INNOPOL® CS 2-3120 TO is developed for pro.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | Conditioned; ISO 527-1/-2 |
Lanxess Durethan® A 30 H2.0 901510 Nylon 66 PA 66 standard injection molding grade, non-reinforced, very easy release, good heat-ageing resistanceApplication Examples: terminal blocks, cable clips, bobbins, gearwheels |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP HX03409C PA11 LNP* THERMOCOMP* HX03409C is a compound based on Nylon 11 resin containing Proprietary Filler(s). Added features of this material include: Clean Compound System, High Specific Gravity. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL PPX PPX7110 PPE+PP (Europe-Africa-Middle East) PPX7110 is an alloy of PP and PPO, providing high impact and good heat resistance. Generic identification acc. ISO11469: >PP+PPE+PS-I |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL PX1185 PPE+HIPS (Europe-Africa-Middle East) NORYL PX1185 is a special NORYL grade developed for extrusion of automotive trims. NORYL PX1185 offers high heat resistance and good impact performance. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527-1/-2 |
Suzhou Hipro Polymers Hiprolon® 200 NN Nylon 1010, conditioned Hiprolon® 200 NN is a medium viscosity polyamide 10,10 with neat resin based on bio-renewable resource. It features low density, low water absorption, good cold impact resistance, good wear-resi.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527 |
Polyram RamShine PS580 High Impact Polystyrene, Flame Retardant Flame retardant V-0, high impact polystyrene for injection molding applications.Information provided by Polyram. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527-2 |
Total PPH 5042 Polypropylene, Homopolymer ATOFINA Polypropylene PPH 5042 is homopolymer.ApplicationATOFINA Polypropylene PPH 5042 has been specially designed for extrusion-thermoforming, where it gives improved rigidity and impact resistanc.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527-2 |
Total PPH 5060 Polypropylene, Homopolymer ATOFINA Polypropylene PPH 5060 is homopolymer.ApplicationATOFINA Polypropylene PPH 5060 is specially suitable for tape extrusion for woven applications and for extrusion thermoforming. PPH 5060 is.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | At 1 mm/min; ISO 527-2 |
Borealis Daplen™ ED213AE TPO Compound Daplen ED213AE is a 20% mineral and elastomer modified polypropylene compound intended for injection molding. Daplen ED213AE is a material with excellent impact/ stiffness ratio. Thanks to its low.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527-1/-2 |
Unitika EX-1030 PA6, Dry High-impact nylonInformation provided by Unitika Ltd. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527-1/-2 |
DSM Akulon® S223-D Nylon 66 (European Grade) (Cond) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier .. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® L 16 GM nat PA12 Grilamd L16 GM is a low-viscosity, non-reinforced PA 12 grade, UV- and heat-stabilized. The modification with a crystallization regulator causes a quick freeze and a fine, crystalline structure. Due.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO527-2 |
ExxonMobil PPT0170F Polypropylene Homopolymer Product Description: PPT0170F is an unstabilized homo polymer granular resin designed for automotive and compounding applications.Availability: Europe Processing Method: CompoundingInformation prov.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527-2 |
Domo 1101S Polypropylene Homopolymer Information provided by Domo. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527 |
Eurotec® Tecomid® NB40 NL IH PA 6 impact modified Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | 50%RH; ISO 527-1/-2 |
DuPont Performance Polymers Zytel® 158L NC010 Nylon 612
(Unverified Data**) Unreinforced Polyamide 612Information provided by DuPont Performance Polymers |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527 |
Eurotec® Tecomid® NA40 NL IH PA6.6, impact modified, natural Information provided by Eurotec® |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | |
BASF Novolen® 1100 L Polypropylene, Injection Molding Grade Injection molded parts, film tape, fibrillated film and monofilaments.Data was collected by ISO methods and provided by BASF. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | ISO 527-1/-2 |
BASF Ultraform® N2650 Z4 POM + PUR Description: Elastomer-modified injection molding grade with high impact strength for clips, snap and fastening elements, and also for components subject to impact stress.Information provided by BAS.. |
|||
Tensile Modulus | 1.50 GPa @Temperature 120 °C |
218 ksi @Temperature 248 °F |
ISO Data |
BASF Ultramid® 8272G HS BK-102 12% Glass Filled PA6 (Conditioned) Ultramid 8272G HS BK-102 is a 12% glass fiber reinforced, black pigmented, thermally modified, nylon 6 blow molding compound offering an excellent balance of engineering properties combined with the.. |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | 1 mm/min; ISO 527-1 |
Sax Polymers SAXAMID 236Q33 Nylon 6.6, Impact Modified SAXAMID 236Q33 is a impact-modified polyamide 6.6 injection-molding-grade with very good flow properties and outstanding toughness. Even at low temperatures this grade offers super-tough properties... |
|||
Tensile Modulus | 1.50 GPa | 218 ksi | |
Plastcom SLOVALEN PH 91 C 20 PP, 20% mineral filling FeaturesModified homopolymer and copolymer PP for injection moulding with the contenct of 20% microground, chemically modified talc. Increased strength, rigidity and thermal application up to 100°C.. |