Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Linear Mold Shrinkage = 0.011 in/in Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Linear Mold Shrinkage 0.0080 - 0.011 cm/cm

@Thickness 3.17 mm
0.0080 - 0.011 in/in

@Thickness 0.125 in
Ovation Polymers Opnyl OP66UT105 Nylon 66
Ultra Tough - High Impact, Excellent retention of mechanical properties, High service temperature. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humidity. All..
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
With Flow; ISO 2577
Polykemi AB POLYfill PPC TS4030 H Polypropylene Copolymer, Mineral Reinforced
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
Across Flow; ISO 2577
Polykemi AB POLYfill PPH GF5020 HC Polypropylene Homopolymer, Glass Fiber Reinforced
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0070 - 0.011 cm/cm
0.0070 - 0.011 in/in
(longitudinal) Injection; ISO 2257
Raschig Group MELOPLAS® 183 MF
Cellulose-reinforced and inorganically filled, phenol-modified MF molding compound (MPF) in white and colored shades. Improved dimensional stability and electrical properties as compared with MP 18..
Linear Mold Shrinkage 0.0080 - 0.011 cm/cm
0.0080 - 0.011 in/in
conditioned 48 hrs at 90°C
Phillips Sumika Marlex® CHP-275 Thermoplastic Polyolefin  (discontinued **)
Engineered Thermoplastic Polyolefin.Applications: Automotive Head and Side Impact TrimConditioning after Molding: 48 hr at 23°C, 48 hr at 90°CNominal Shrinkage: 0.7-0.9%, 0.8-1.1%Drying conditions..
Linear Mold Shrinkage 0.0080 - 0.011 cm/cm
0.0080 - 0.011 in/in
With Flow; ISO 2577
Polykemi AB POLYfill PPH K8040 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0070 - 0.011 cm/cm
0.0070 - 0.011 in/in
Lehmann & Voss LUVOCOM® 1301-7932 PPS, linear, with aramid reinforcement and PTFE
Applications: Automotive industry, textile-and office machinery, medical- and precision engineering.Improved friction and wear behaviour. Emergency running property.Low warpage, isotropic shrinkage ..
Linear Mold Shrinkage 0.0070 - 0.011 cm/cm
0.0070 - 0.011 in/in
Lehmann & Voss LUVOCOM® 1301-8290 PPS, linear, with aramid reinforcement
Applications: Automotive industry, textile-and office machinery, medical- and precision engineering.Improved friction and wear behaviour. Emergency running property.Low warpage.dynamic stressInforma..
Linear Mold Shrinkage 0.0070 - 0.011 cm/cm
0.0070 - 0.011 in/in
Lehmann & Voss LUVOCOM® 3/TF/20/BK Polyamide 6, with PTFE
Applications: Automotive industry, textile machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteristics.Reduce..
Linear Mold Shrinkage 0.0070 - 0.011 cm/cm
0.0070 - 0.011 in/in
Lehmann & Voss LUVOCOM® 3-7281/PL/HI/BK Polyamide 6, with PTFE, toughness-modified
Applications: Automotive industry, textile machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteristics.Reduce..
Linear Mold Shrinkage 0.0050 - 0.011 cm/cm

@Temperature 23.0 °C
0.0050 - 0.011 in/in

@Temperature 73.4 °F
ASTM D955
Kingfa PBT-RG152 Flame Retardant, 15% Glass Fiber Reinforced PBT
Features:Flame retardantHigh strengthHigh temperature propertiesHigh glossyGood surfaceNo bloomingApplications:Injection moldingConnectorsRelayBobbinsPlugsE & E partsInformation Provided by Kingfa S..
Linear Mold Shrinkage 0.0040 - 0.011 cm/cm
0.0040 - 0.011 in/in
Lehmann & Voss LUVOCOM® 1-0866 Polyamide 66, with aramid reinforcement, heat stabilized
Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Low warpage.Improved heat resistance.Control disks, cams, sliding elements and other duty parts..
Linear Mold Shrinkage 0.0050 - 0.011 cm/cm

@Temperature 23.0 °C
0.0050 - 0.011 in/in

@Temperature 73.4 °F
ASTM D955
Kingfa PET-RG15 Flame Retardant, 15% Glass Fiber Reinforced PET
Features:Flame retardantHigh strengthGood heat resistanceOutstanding electrical propertiesApplications:Injection moldingConnectorsRelayBobbinsSocketsE & E partsInformation Provided by Kingfa Sci. & ..
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
ASTM D955
Kolon Kopa® KN151 Nylon 6 Resin
KOPA is widely used in the automobile and industrial parts.General KOPA N-6 Features: Good mechanical properties, Extreme toughness, Outstanding self-lubrication and abrasion resistance, Excellent c..
Linear Mold Shrinkage 0.0080 - 0.011 cm/cm
0.0080 - 0.011 in/in
as molded; ISO 294
LyondellBasell DEXFLEX® 727 TPO
Description: DEXFLEX® 727 is a thermoplastic olefinic elastomer (TPO) designed for automotive exterior applications that require a combination of stiffness, good low-temperature impact resistance..
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
A. Schulman POLYTROPE™ TPP 512 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 512 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
A. Schulman POLYTROPE™ TPP 504 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 504 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp..
Linear Mold Shrinkage 0.0070 - 0.011 cm/cm
0.0070 - 0.011 in/in
ISO 2577
Polyram PlusTek PA351M8 Nylon 6.6 for Injection Molding, 40% Mineral Reinforced
40% Minerals Reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram.
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
A. Schulman POLYTROPE™ TPP 512 Injection Molding Grade Olefinic Thermoplastic Elastomer
DescriptionPolytrope TPP 512 is an injection molding grade olefinic thermoplastic elastomer. This product has excellent low temperature impact properties and flow characteristics suitable for moldi..
Linear Mold Shrinkage 0.0060 - 0.011 cm/cm
0.0060 - 0.011 in/in
D955
Zhejiang Juner 301-G10 10% Glass Fibre Reinforced and Flammable Resistant
Applications: Electrons and Electricity: TV Components, Plugs of Computers, Exhaust Fans of Computers, Plugs, Sockets, Shells of Electronics, Framework of Level Output Transformers, Pipe Pedestals, ..
Linear Mold Shrinkage 0.0060 - 0.011 cm/cm

@Thickness 3.17 mm
0.0060 - 0.011 in/in

@Thickness 0.125 in
ASTM D955
RTP Company RTP 1001 GB 15 TFE 5 Polybutylene Terephthalate (PBT), Glass Fiber - Glass Bead - PTFE Lubricated
Linear Mold Shrinkage 0.0070 - 0.011 cm/cm

@Thickness 3.20 mm
0.0070 - 0.011 in/in

@Thickness 0.126 in
aged 48 hrs at 121°C; ISO 294
A. Schulman FORMION™ FI 243 Ionomer
Information provided by A. Schulman.
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm

@Thickness 4.00 mm
0.0090 - 0.011 in/in

@Thickness 0.157 in
CP-Polymer-Technik Wellamid® 6600 GS 30 HWCP 30% Glass Sphere Filled Nylon 66, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
ASTM D955
Diamond Polymers DIAMALOY 522 PC/PBT Alloy
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Linear Mold Shrinkage 0.0060 - 0.011 cm/cm
0.0060 - 0.011 in/in
ASTM D955
Beijing Ranger Chem PBT-201-G10 272 Flame Retarding FR PBT
Modified PBT Characteristics: Unreinforced grades have abundant strength and flexibility, and have strong characteristics against brittleness. UL-certified slow-burning (94HB) and self-extinguishin..
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm

@Thickness 4.00 mm
0.0090 - 0.011 in/in

@Thickness 0.157 in
CP-Polymer-Technik Wellamid® 6600 GS 20 HWCP 20% Glass Sphere Filled Nylon 66, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
Across Flow; ISO 2577
Polykemi AB POLYfill PPH TS8038 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0090 - 0.011 cm/cm
0.0090 - 0.011 in/in
With Flow; ISO 2577
Polykemi AB POLYfill PPHC K1035 Polypropylene, Mineral Reinforced
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0040 - 0.011 cm/cm
0.0040 - 0.011 in/in
ASTM D955
Asia International Enterprise (Hong Kong) 30G6F Polybutylene terephthalate, 30% Glass Fiber Filled
Information provided by Asia International Enterprise (Hong Kong) Ltd.
Linear Mold Shrinkage 0.0080 - 0.011 cm/cm

@Thickness 3.17 mm
0.0080 - 0.011 in/in

@Thickness 0.125 in
ASTM D955
RTP Company RTP 1200-55D BLACK Ester-based Thermoplastic Polyurethane Elastomer  (discontinued **)
Data for this product has not been recently verified, please contact RTP Company for more information before specifying this grade.
Copyright © lookpolymers.com All Rights Reserved