Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Linear Mold Shrinkage = 0.0080 in/in Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Linear Mold Shrinkage 0.0080 - 0.010 cm/cm
0.0080 - 0.010 in/in
ISO 294-4
Premix Thermoplastics PRE-ELEC® ESD 7300
PRE-ELEC ESD 7300 is a static dissipative thermoplastic compound based on PC/PBT. The dissipative property is permanent and built into the polymer chain. PRE-ELEC ESD 7300 has been developed for inj..
Linear Mold Shrinkage 0.0080 - 0.010 cm/cm
0.0080 - 0.010 in/in
With Flow; ISO 2577
Polykemi AB POLYfill PP EIP12030F Polypropylene/EPDM, Mineral Reinforced
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0080 - 0.016 cm/cm
0.0080 - 0.016 in/in
FRISETTA Test Method
Nilit FRIANYL B63 KV40 Nylon 6 for injection molding, 40% glass ball reinforced
Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
Across Flow; ISO 2577
Polykemi AB POLYfill PPH GF35040 D PP, Glass Fiber-Reinforced, Chemically Coupled, Detergent Resistant
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0080 - 0.010 cm/cm
0.0080 - 0.010 in/in
Across Flow; ISO 2577
Polykemi AB POLYfill PPH K20040 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
ASTM D955
Covestro Bayblend® 2773 Polycarbonate + ABS Blend, Automotive  (discontinued **)
Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ..
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
ASTM D995
Huntsman IROGRAN® A 78 E 4723 Polyester-Based TPU-Injection Extrusion Grade
Introduction: IROGRAN A 78 E 4723 is a thermoplastic polyester- polyurethane for injection moulding and extrusion applications. Additional characteristics of the product are flexibility and high mec..
Linear Mold Shrinkage 0.0080 - 0.016 cm/cm
0.0080 - 0.016 in/in
ISO 294-4:1997
Inno-Comp INNOPOL® CS 1-5820 20% Glass-Fiber-Filled Polypropylene Homopolymer
INNOPOL® CS 1-5820 is a 20% glass-fiber-filled polypropylene homopolymer compound. This grade is available in natural and custom colored form.INNOPOL® CS 1-5820 is recommended for producing in..
Linear Mold Shrinkage 0.0080 - 0.010 cm/cm
0.0080 - 0.010 in/in
ASTM D955
Kolon KOPA® KN173MC M/F Reinforced Nylon 6
KOPA® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in automobile and industrial parts.Good mechanical properties, outstanding self-lubr..
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
ASTM D955-89
Multibase Multi-ABS 3832 Natural
Multi-ABS 3832 is specially formulated for ease of processability, controllability, and thin-walled parts where higher than normal temperatures are being used. This product also shows higher than n..
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
± 0.1 after 60 min. at 120°C
A. Schulman POLYTROPE™ TPP 615 Olefinic Elastomer
DescriptionPolytrope TPP 615 is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 615 is de..
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
± 0.1 after 60 min. at 120°C
A. Schulman POLYTROPE™ TPP 620 Olefinic Elastomer
DescriptionPolytrope TPP 620is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 620 is des..
Linear Mold Shrinkage 0.0080 - 0.011 cm/cm
0.0080 - 0.011 in/in
ASTM D955
A. Schulman POLYFORT™ FPP 1602 Glass Reinforced, Chemically Coupled Homopolymer
DescriptionPolyfort® FPP 1602 is a 10% glass reinforced chemically coupled homopolymer.Information provided by A. Schulman.
Linear Mold Shrinkage 0.0080 - 0.014 cm/cm

@Thickness 3.20 mm
0.0080 - 0.014 in/in

@Thickness 0.126 in
ASTM D 955
RTP Company RTP 200.5 Z Nylon 6/6 (PA) Glass Fiber - FDA Compliant Ingredients
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
± 0.1 after 60 min. at 120°C
A. Schulman POLYTROPE™ TPP 620 Olefinic Elastomer
DescriptionPolytrope TPP 620is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 620 is des..
Linear Mold Shrinkage 0.0080 - 0.015 cm/cm
0.0080 - 0.015 in/in
ASTM D955
Cheng Yu Plastic N6GV25 Flame Retardant Nylon 6, 25% Glass Filled
Linear Mold Shrinkage 0.0080 - 0.010 cm/cm
0.0080 - 0.010 in/in
Ecomass® 1080ZC86 Stainless Steel Powder Filled Polyamide Alloy, Injection Molding
Stainless Steel Powder Filled Polyamide Alloy, Very Good Toughness, Product Form - PelletsProcessing Method: Injection MoldingNontoxic alternative to Lead, weighting, balancing and radiation shield..
Linear Mold Shrinkage 0.0080 - 0.020 cm/cm
0.0080 - 0.020 in/in
ELASTO UK Dryflex® 600800S SEBS Based Material, Filled Qualities, 80A Hardness, Natural
The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Linear Mold Shrinkage 0.0080 - 0.020 cm/cm
0.0080 - 0.020 in/in
ELASTO UK Dryflex® 660850S SEBS Based Material, Semi-Filled Qualities, 85A Hardness, Natural
The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Linear Mold Shrinkage 0.0080 - 0.020 cm/cm
0.0080 - 0.020 in/in
ELASTO UK Dryflex® 662550S SEBS Based Material, Semi-Filled Qualities, 55A Hardness, Black
The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Linear Mold Shrinkage 0.0080 - 0.020 cm/cm
0.0080 - 0.020 in/in
ELASTO UK Dryflex® 662650S SEBS Based Material, Semi-Filled Qualities, 65A Hardness, Black
The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Linear Mold Shrinkage 0.0080 - 0.012 cm/cm

@Thickness 4.00 mm
0.0080 - 0.012 in/in

@Thickness 0.157 in
CP-Polymer-Technik Wellamid® 6000 HWCP Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
Linear Mold Shrinkage 0.0080 - 0.012 cm/cm

@Thickness 4.00 mm
0.0080 - 0.012 in/in

@Thickness 0.157 in
CP-Polymer-Technik Wellamid® 6600 PA-66-HWV0CP UL-Licensed Nylon 66, Flame Protection, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
E-Polymers TEKAFIN® PH70G1 HIPP + 10% Glass Fiber Reinforced Scratch Resistance Compounded-PP
Modified PP: TEKAFIN is modified PP resins formulated with various fillers and modifiers. It has product lines for impact modified, glass fiber reinforced, inorganic filler reinforced and hybrids.I..
Linear Mold Shrinkage 0.0080 - 0.020 cm/cm
0.0080 - 0.020 in/in
ELASTO UK Dryflex® 600550S SEBS Based Material, Filled Qualities, 55A Hardness, Natural
The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
ASTM D955
A. Schulman ComAlloy Lubrilon® 604 Nylon 6/6, PTFE/Molybdenum Disulfide Filled, Flow Enhanced
Data provided by the manufacturer, ComAlloy International Company. High performance and excellent lubricity with minimal surface wear.The ComAlloy product line has been integrated into the A Schulma..
Linear Mold Shrinkage 0.0080 cm/cm
0.0080 in/in
ASTM D955
Aaron Industries AAROPRENE® TFPP 2040 Talc Filled Polypropylene
AAROPRENE® TFPP 2000 Series Talc Reinforced CompoundsMelt flow index may be specified. Color may be specified.
Linear Mold Shrinkage 0.0080 - 0.010 cm/cm
0.0080 - 0.010 in/in
Across Flow; ISO 2577
Polykemi AB POLYfill PPH T5040 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Linear Mold Shrinkage 0.0080 - 0.010 cm/cm
0.0080 - 0.010 in/in
ISO 2577
Polyram RamLloy PVB702 Nylon/ABS Alloy, Impact Modified
Impact modified, UV stabilized Nylon/ABS alloy for injection molding applications.Information provided by Polyram.
Linear Mold Shrinkage 0.0080 - 0.010 cm/cm
0.0080 - 0.010 in/in
With Flow; ISO 2577
Polykemi AB POLYfill PPH T5040 FC VT Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Copyright © lookpolymers.com All Rights Reserved