Victrex® PEEK 150GL15 Polyetheretherketone, 15% Glass Fibre Reinforced

Category	Polymer , Thermoplastic , Polyketone , Polyetheretherketone (PEEK) , Polyetheretherketone, PEEK, Glass Fiber Filled
Manufacturer	Victrex
Trade Name	PEEK
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Victrex® PEEK 150GL15 Polyetheretherketone, 15% Glass Fibre Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product Description:High performance thermoplastic material, 15% glass fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding, very easy flow, FDA food contact compliant, colour natural/beige.Typical Application Areas:Complex geometries with thin cross sections or long flow lengths where good strength in a static or dynamic system is required. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.Information Provided by VICTREX®

Physical Properties	Metric	English	Comments
Density	1.40 g/cc	0.0506 lb/in³	Crystalline; ISO 1183
Water Absorption at Saturation	0.40 % @Temperature 23.0 °C	0.40 % @Temperature 73.4 °F	Equilibrium; by immersion; ISO 62-1
	0.50 % @Temperature 100 °C	0.50 % @Temperature 212 °F	immersion; ISO 62-1
Viscosity	200000 cP @Temperature 400 °C	200000 cP @Temperature 752 °F	melt; ISO 11443
Linear Mold Shrinkage, Flow	0.0040 cm/cm	0.0040 in/in	360°C nozzle, 160°C tool; ISO 294-4
Linear Mold Shrinkage, Transverse	0.010 cm/cm	0.010 in/in	375°C nozzle, 180°C tool; ISO 294-4
Spiral Flow	18.0 cm @Thickness 1.00 mm	7.09 in @Thickness 0.0394 in	375°C nozzle, 180°C tool

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	86 @Temperature 23.0 °C	86 @Temperature 73.4 °F	ISO 868
Tensile Strength at Break	135 MPa @Temperature 23.0 °C	19600 psi @Temperature 73.4 °F	ISO 527
Elongation at Break	2.4 % @Temperature 23.0 °C	2.4 % @Temperature 73.4 °F	ISO 527
Tensile Modulus	7.50 GPa @Temperature 23.0 °C	1090 ksi @Temperature 73.4 °F	ISO 527
Flexural Strength	215 MPa @Temperature 23.0 °C	31200 psi @Temperature 73.4 °F	ISO 178
Flexural Modulus	7.30 GPa @Temperature 23.0 °C	1060 ksi @Temperature 73.4 °F	ISO 178
Izod Impact, Notched (ISO)	0.600 kJ/m² @Temperature 23.0 °C	0.286 ft-lb/in² @Temperature 73.4 °F	ISO 180/A
Izod Impact, Unnotched (ISO)	2.50 kJ/m² @Temperature 23.0 °C	1.19 ft-lb/in² @Temperature 73.4 °F	ISO 180/U

Thermal Properties	Metric	English	Comments
CTE, linear	55.0 µm/m-°C @Temperature <=143 °C	30.6 µin/in-°F @Temperature <=289 °F	Average below Tg; ISO 11359
	120 µm/m-°C @Temperature >=143 °C	66.7 µin/in-°F @Temperature >=289 °F	Average above Tg; ISO 11359
CTE, linear, Parallel to Flow	30.0 µm/m-°C @Temperature <=143 °C	16.7 µin/in-°F @Temperature <=289 °F	Below Tg; ISO 11359
	30.0 µm/m-°C @Temperature >=143 °C	16.7 µin/in-°F @Temperature >=289 °F	Above Tg; ISO 11359
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F	Average; ISO 22007-4
	0.350 W/m-K @Temperature 23.0 °C	2.43 BTU-in/hr-ft²-°F @Temperature 73.4 °F	Along flow; ISO/CD 22007-4
Melting Point	343 °C	649 °F	ISO 11357
Deflection Temperature at 1.8 MPa (264 psi)	323 °C	613 °F	ISO 75-f
Glass Transition Temp, Tg	143 °C	289 °F	Onset; ISO 11357
	147 °C	297 °F	Midpoint; ISO 11357

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	IEC 60093
Dielectric Strength	23.0 kV/mm @Thickness 50.8 mm	584 kV/in @Thickness 2.00 in	IEC 30243-1
Comparative Tracking Index	150 V	150 V	IEC 60093

Processing Properties	Metric	English	Comments
Processing Temperature	<= 100 °C	<= 212 °F	Hopper Temperature
Nozzle Temperature	375 °C	707 °F
Mold Temperature	170 - 200 °C	338 - 392 °F
Drying Temperature	120 °C @Time 18000 sec	248 °F @Time 5.00 hour
	150 °C @Time 10800 sec	302 °F @Time 3.00 hour

Users viewing this material also viewed the following: