Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Stellarchem DIOSHY® MP-960NC TPE Compound

Category Polymer , Thermoplastic , Elastomer, TPE , Olefinic TPE
Manufacturer Stellarchem
Trade Name DIOSHY®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Stellarchem DIOSHY® MP-960NC TPE Compound.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
This grade of Stellarchem MP series is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, styrene block copolymers based, completely recyclable, colorable & non-hygroscopic thermoplastics elastomer material. It's formulated to overmold to PP thermoplastics in normal dual injection & extrusion processing.Information provided by Stellarchem Polymer & Industrial
Physical Properties Metric English Comments
Density 0.930 g/cc
0.0336 lb/in³
Particle Mesh Size 80 - 150 Mesh
80 - 150 Mesh
Melt Flow 26.9 g/10 min
26.9 g/10 min
JIS K7210
Mechanical Properties Metric English Comments
Hardness, Shore A 59
59
JIS K6301
Tensile Strength, Ultimate 0.883 MPa
128 psi
JIS K6301
Elongation at Break 662 %
662 %
JIS K6301
100% Modulus 0.00588 GPa
0.853 ksi
JIS K6301
300% Modulus 0.000490 GPa
0.0711 ksi
JIS K6301
Tear Strength 1.33 kN/m
7.62 pli
JIS K6301-B
Processing Properties Metric English Comments
Processing Temperature 190 - 205 °C
374 - 401 °F
Metering Temperature, Extrusion
Rear Barrel Temperature 160 - 190 °C
320 - 374 °F
Injection Molding
180 - 190 °C
356 - 374 °F
Extrusion
Middle Barrel Temperature 170 - 190 °C
338 - 374 °F
Injection Molding
185 - 195 °C
365 - 383 °F
Transition, Extrusion
Front Barrel Temperature 180 - 200 °C
356 - 392 °F
Injection Molding
195 - 210 °C
383 - 410 °F
Extrusion
Nozzle Temperature 190 - 210 °C
374 - 410 °F
Injection Molding
Die Temperature 195 - 210 °C
383 - 410 °F
Extrusion
Melt Temperature 170 - 210 °C
338 - 410 °F
Injection Molding
190 - 210 °C
374 - 410 °F
Extrusion
Mold Temperature 25.0 - 40.0 °C
77.0 - 104 °F
Injection Molding
Injection Pressure 5.00 - 40.0 MPa
725 - 5800 psi
Injection Molding
Back Pressure 0.500 - 1.00 MPa
72.5 - 145 psi
Injection Molding
Screw Speed 60 - 100 rpm
60 - 100 rpm
Extrusion
100 - 200 rpm
100 - 200 rpm
Injection Molding
Copyright © lookpolymers.com All Rights Reserved