Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Eurotec® Tecomid® NT40 NL XA60 PPA, unfilled, flame retardant - halogen & red phosphorus free, heat stabilized, natural

Category Polymer , Thermoplastic , Polyphthalamide (PPA)
Manufacturer Eurotec
Trade Name Tecomid®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Eurotec® Tecomid® NT40 NL XA60 PPA, unfilled, flame retardant - halogen & red phosphorus free, heat stabilized, natural.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Information provided by Eurotec®
Physical Properties Metric English Comments
Density 1.24 g/cc
0.0448 lb/in³
ISO 1183
Moisture Absorption 2.00 %

@Temperature 23.0 °C
2.00 %

@Temperature 73.4 °F
50% RH; ISO 960
Linear Mold Shrinkage, Flow 0.011 cm/cm
0.011 in/in
Eurotec
Linear Mold Shrinkage, Transverse 0.011 cm/cm
0.011 in/in
Eurotec
Mechanical Properties Metric English Comments
Tensile Strength at Break 75.0 MPa
10900 psi
ISO 527
Elongation at Break 2.0 %
2.0 %
ISO 527
Tensile Modulus 4.00 GPa
580 ksi
ISO 527
Izod Impact, Notched (ISO) 3.00 kJ/m²

@Temperature -30.0 °C
1.43 ft-lb/in²

@Temperature -22.0 °F
ISO 180/1A
4.00 kJ/m²

@Temperature 23.0 °C
1.90 ft-lb/in²

@Temperature 73.4 °F
ISO 180/1A
Thermal Properties Metric English Comments
Melting Point 315 °C
599 °F
[10 K/min], ISO 11357
Deflection Temperature at 1.8 MPa (264 psi) 130 °C
266 °F
ISO 75
Flammability, UL94 V-0

@Thickness 1.60 mm
V-0

@Thickness 0.0630 in
V-0

@Thickness 0.750 mm
V-0

@Thickness 0.0295 in
Glow Wire Test 775 °C

@Thickness 2.00 mm
1430 °F

@Thickness 0.0787 in
GWIT; IEC 60695
960 °C

@Thickness 2.00 mm
1760 °F

@Thickness 0.0787 in
GWFI; IEC 60695
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093
Surface Resistance 1.00e+13 ohm
1.00e+13 ohm
IEC 60093
Comparative Tracking Index 600 V
600 V
Solution A; IEC 60112
Processing Properties Metric English Comments
Processing Temperature 320 - 340 °C
608 - 644 °F
Feed Temperature 60.0 - 80.0 °C
140 - 176 °F
Throat
Mold Temperature 140 - 180 °C
284 - 356 °F
Drying Temperature 120 °C
248 °F
Dry Time 4.00 hour
4.00 hour
Moisture Content <= 0.20 %
<= 0.20 %
ISO 960
Hold Pressure 40.0 - 80.0 MPa
5800 - 11600 psi
Descriptive Properties Value Comments
Back Pressure Low
Injection Speed Fast
Copyright © lookpolymers.com All Rights Reserved