Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 75.0 MPa | 10900 psi | STN EN ISO 527-2 |
Plastcom PLASTAMID® 6 BT SD PA6 Basic type PA 6 for compounding, modified for general use. Grade can contain PA 66 up to 5% and TiO2 content up to 0.25 %. Use: automotive, engineering, electrical and consumer-goods industryInforma.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | STN EN ISO 527-2 |
Plastcom PLASTAMID® 610 BT N 32 B PA610 Basic type PA610 for injection molding, modified for general use. Use: extrusion, filaments, injection molding. Delivered in the natural color.Information Provided by Plastcom spol. s r.o. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | |
Plastcom SLOVALEN PC 19 GF 20 PP, 20% glass fibre, mod. of mech. properties FeaturesModified copolymer PP for iextrusion, chemically reinforced with 20% glass fibre, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP. Applied i.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | |
Plastcom SLOVAMID 6 FRM 2 PA6, flame retardant FeaturesDetermined for electrotechnical use. Delivered in natural mode. PA 6 for injection moulding with reduced flammability, with nonhalogen flame retardant. Excellent fluidity of the material pre.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527 |
GEHR Plastics PA 6.6-30GF Nylon 6.6, 30% Glass Fiber, Conditioned |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527 |
Grupo Repol Dinalon® A1S25 H PA66 Heat Stabilized Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527 |
Grupo Repol Dinalon® A1S25 PA66 Unreinforced Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | Conditioned; ISO 527-1,-2 |
Lanxess Durethan® BKV 15 H3.0 000000 Nylon 6 Copolymer, 15% Glass Fibers PA 6 Copolymer, 15% glass fibers, injection molding, heat-ageing stabilized |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | cond.; ISO 527-1, -2; 5 mm/min |
Lanxess Durethan® DP AKV 30 FN00 DUS013 Nylon 66, 30% Glass Fiber PA 66, 30% glass fibers, injection molding, halogen free flame retardantInformation provided by LANXESS. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | |
LATI Latilub 66-20ST PA66, Silicone/PTFE Filled Self-lubricating product based on Polyamide 66 (PA66). Silicone / PTFE. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria T.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP LX00430 PEEK LNP* LUBRICOMP* LX00430 is a compound based on Pelyetheretherketone containing Proprietary Fillers. Added feature of this grade is: Wear Resistant. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527 Type 1A |
Solvay TECHNYL® B 218 Black 21 N PA66/6, DRY Description: Unreinforced copolyamide PA 66/6 , heat stabilized , medium viscosity, for injection molding.Available in: EuropeProduct Applications: TECHNYL® B 218 offers all of the primary proper.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics ULTEM 1285 PEI (Europe-Africa-Middle East) Transparent Polyetherimide blend. ECO Conforming. US FDA and EU Food Contact compliant in recognized colors. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics ULTEM ATX200F PEI (Europe-Africa-Middle East) High flow Polyetherimide blend. Resin is RoHS compliant. UL94 V0 Listing. US FDA Food Contact compliant. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics ULTEM LTX300A PEI Copolymer High flow Polyetherimide blend with low toxicity, smoke and flame evolution. ECO Compliant, UL94 V0 listing in recognized colors. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ASTM D 638 |
SABIC Innovative Plastics LNP Thermocomp IF002 PA 6/12 LNP* Thermocomp* IF002 is a compound based on Nylon 6/12 resin containing Glass Fiber.This data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-93 |
Wellman Wellamid® NY1875-BK1 Nylon 66, Unfilled All information provided by Wellman Engineered Resins. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-93 |
Wellman Wellamid® NY-4000 Nylon 6, Engineering Grade All information provided by Wellman Engineered Resins. |
|||
Tensile Strength at Break | 75.2 MPa | 10900 psi | ASTM D638 |
A. Schulman SCHULAMID® 66 MV3FR Flame Retardant Nylon 6/6 Information provided by A. Schulman. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527-1,-2 |
Covestro Makrolon® 3100 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• General purpose• Hig.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527-1,-2 |
Covestro Makrolon® FR 7067 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• Flame retardant• Med.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50%RH; ISO 527-1/-2 |
DuPont Performance Polymers Zytel® 70G13HS1L NC010 Nylon 66
(Unverified Data**) 13% Glass Reinforced Heat Stabilized Polyamide 66 Zytel 70G13HS1L NC010 is a 13% glass fiber reinforced heat stabilized polyamide 66 resin for injection molding.Information provided by DuPont Perfor.. |
|||
Tensile Strength at Break | 75.0 MPa @Temperature 80.0 °C |
10900 psi @Temperature 176 °F |
ASTM Test |
BASF Petra® 130 FR BK-112 30% Glass Filled PET Petra 130 FR BK-112 is a 30% glass fiber reinforced, black pigmented, flame retardant injection molding compound based on post-consumer and post-industrial recycle polyethylene erephthalate feedstoc.. |
|||
Tensile Strength at Break | 75.0 MPa @Temperature -40.0 °C |
10900 psi @Temperature -40.0 °F |
ASTM D638 |
BASF Ultramid® 8202 L Intermediate PA6 (Dry) Description: Ultramid 8202 L-Intermediate is an unreinforced, low viscosity, non-lubricated PA6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is avai.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-2 |
Ascend Performance Materials Vydyne® R513H Nylon 66, 13% Glass Filled, Conditioned (2.5% Moisture) Vydyne® R513H is general-purpose, 13% glass-reinforced, heat stabilized PA66 resin. Available in natural, it is an injection-molding grade resin that is lubricated for machine feed, flow, and mold .. |
|||
Tensile Strength at Break | 75.3 MPa | 10900 psi | ASTM D3759 |
3M 396 Super Bond Film 3M™ Super Bond Film Tape 396 is a polyester film tape for adhering to polyesters, polyethylenes and many other difficult-to-adhere-to surfaces.Information provided by 3M |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP DFL329 PC LNP LUBRICOMP* DFL329 is a compound based on Polycarbonate resin containing 10% Glass Fiber, 15% PTFE. Added features of this material include: Flame Retardant, Internally Lubricated. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | |
LATI Latilub 88/50-20T PEEK, PTFE Filled Self-lubricating product based on Polyetheretherketone (PEEK). PTFE. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria Ter.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-1/-2 |
Styrolution Luran® 368 R Crystal Clear Transparent 77851 SAN Description: General-purpose grade with well-balanced properties, suitable for injection molding and extrusion. Especially for applications where highest transparency and low natural color is requir.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-93 |
Wellman Wellamid® 42LH-NBK1 General Purpose Nylon 6 Description: General Purpose Nylon 6Information provided by Wellman. |