- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate, Molded
- Covestro Apec® DP1-9389/5 Polycarbonate
Covestro Apec® DP1-9389/5 Polycarbonate
| Category | Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Molded |
| Manufacturer | Covestro |
| Trade Name | Apec® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Covestro Apec® DP1-9389/5 Polycarbonate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Developmental producteasy flowingeasy to demoldsoftening temperature (VST/B 120)=218 °CPreprocessingMax. Water content
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.12 g/cc | 0.0405 lb/in³ | ISO 1183 |
| 0.960 g/cc @Temperature 330 °C |
0.0347 lb/in³ @Temperature 626 °F |
Melt | |
| Water Absorption | 0.30 % | 0.30 % | Similar to ISO 62 |
| Moisture Absorption at Equilibrium | 0.12 % | 0.12 % | Similar to ISO 62 |
| Melt Flow | 4.8 g/10 min @Load 2.16 kg, Temperature 330 °C |
4.8 g/10 min @Load 4.76 lb, Temperature 626 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 78.0 MPa | 11300 psi | ISO 527-1/-2 |
| Elongation at Break | 50 % | 50 % | Nominal; ISO 527-1/-2 |
| Elongation at Yield | 6.9 % | 6.9 % | ISO 527-1/-2 |
| Tensile Modulus | 2.40 GPa | 348 ksi | ISO 527-1/-2 |
| Charpy Impact Unnotched | NB | NB | ISO 179/1eU |
| 25.0 J/cm² @Temperature -30.0 °C |
119 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU | |
| Impact | 5000 | 5000 | Puncture - maximum force (N); ISO 6603-2 |
| 5200 @Temperature -30.0 °C |
5200 @Temperature -22.0 °F |
Puncture - maximum force (N); ISO 6603-2 | |
| Puncture Energy | 50.0 J | 36.9 ft-lb | ISO 6603-2 |
| 40.0 J @Temperature -30.0 °C |
29.5 ft-lb @Temperature -22.0 °F |
ISO 6603-2 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 70.0 µm/m-°C | 38.9 µin/in-°F | ISO 11359-1/-2 |
| CTE, linear, Transverse to Flow | 70.0 µm/m-°C | 38.9 µin/in-°F | ISO 11359-1/-2 |
| Specific Heat Capacity | 1.70 J/g-°C | 0.406 BTU/lb-°F | Melt |
| Thermal Conductivity | 0.163 W/m-K | 1.13 BTU-in/hr-ft²-°F | Melt |
| Deflection Temperature at 0.46 MPa (66 psi) | 206 °C | 403 °F | ISO 75-1/-2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 187 °C | 369 °F | ISO 75-1/-2 |
| Oxygen Index | 25 % | 25 % | ISO 4589-1/-2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+13 ohm-cm | >= 1.00e+13 ohm-cm | IEC 60093 |
| Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm | IEC 60093 |
| Dielectric Constant | 3.0 @Frequency 100 Hz |
3.0 @Frequency 100 Hz |
IEC 60250 |
| 3.0 @Frequency 1.00e+6 Hz |
3.0 @Frequency 1.00e+6 Hz |
IEC 60250 | |
| Dielectric Strength | 35.0 kV/mm | 889 kV/in | IEC 60243-1 |
| Dissipation Factor | 0.00070 @Frequency 100 Hz |
0.00070 @Frequency 100 Hz |
IEC 60250 |
| 0.0080 @Frequency 1.00e+6 Hz |
0.0080 @Frequency 1.00e+6 Hz |
IEC 60250 | |
| Comparative Tracking Index | 600 V | 600 V | IEC 60112 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 330 °C | 626 °F | Injection Molding; ISO 294 |
| 330 - 340 °C | 626 - 644 °F | ||
| Mold Temperature | 100 °C | 212 °F | Injection Molding; ISO 10724 |
| 130 - 160 °C | 266 - 320 °F | ||
| Ejection Temperature | 200 °C | 392 °F | |
| Injection Velocity | 200 mm/sec | 7.87 in/sec | ISO 294 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Availability | Europe | |
| Near East/Africa | ||
| South and Central America | ||
| Eff. thermal diffusivity (m²/s) | 1E-07 | |
| Process | Injection Molding |
Users viewing this material also viewed the following:
- Nye Lubricants 875MS-UV (FG) Synthetic Oil
- MV Labs HO900 HoPO4 Holmium phosphate, anhydrous
- Malvern Minerals Novacite® L-207A Untreated Lamellar Quartz Filler/Extender
- MetalTek WASPALOY® Centri-Vac Nickel Cobalt Based Alloy
- Shandong Dongyue Shenzhou New Material Co Vinylidene Fluoride (VDF)
- DuPont Performance Polymers Zytel® 80G25HS BK117 Nylon 66 (Unverified Data**)
- TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 40 PHR Hi-Sil 243 LD Filler
- Overview of materials for Polytrimethylene Terephthalate (PTT)
Copyright © lookpolymers.com All Rights Reserved