Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Dielectric Strength = 889 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Electrical Properties Metric English Comments
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Lanxess Durethan® BC 304 H3.0 000000 Nylon 6
PA 6, injection molding grade, non-reinforced, elastomer-modified, extremely high notched impact strength, including in the dry state and at low temperatures, also applicable for barrier layers in e..
Dielectric Strength 35.0 kV/mm
889 kV/in
Conditioned; IEC 60243-1
Lanxess Durethan® BKV 25 H2.0 LT 904040 Nylon 6, 25% Glass Fiber
PA 6, injection molding grade, 25% glass fibers, good heat-ageing resistance, laser-weldable
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243
Solvay TECHNYL® A 218 V50 PA66, 50% glass fiber, DRY
Description: TECHNYL® A 218 V50 is a polyamide 66, reinforced with 50% of glass fiber, heat stabilized, for injection molding. This product is available in natural and black colors.Benefits: The ..
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243
Solvay TECHNYL® A 218W V30 Black FA PA66, 30% glass fiber, DRY
Description: Polyamide 66, reinforced with 30% of glass fiber, for injection molding, heat stabilized, with improved hydrolysis resistance.Available in: EuropeProduct Applications: TECHNYL A 218W V3..
Dielectric Strength 35.0 kV/mm

@Thickness 1.50 mm
889 kV/in

@Thickness 0.0591 in
Short Time; IEC 60243-1
Styrolution Novodur® M205FC ABS
Novodur HD M205FC is an injection molding grade especially suitable for medical applications providing enhanced stiffness.Information provided by Styrolution
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 243
Vyncolit 2950 W Novolac Phenolic
Mineral and glass fiber filled phenolic molding compound with a very high strain to failure in flexure. UL listed.USES: Armature insulation.Information provided by Vyncolit, a Sumitomo Bakelite Gro..
Dielectric Strength 35.0 kV/mm

@Thickness 1.00 mm
889 kV/in

@Thickness 0.0394 in
IEC 60243-1
Covestro Apec® 1603 High-Heat Polycarbonate
This linear, amorphous copolycarbonate is most suitable for applications that must withstand high temperatures and exhibit toughness, impact resistance and high transparency. These properties, along..
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Covestro Bayblend® T65 XF Polycarbonate + ABS
General purpose injection molding gradeVicat/B 120 temperature = 120 °Cimproved flowability compared to T65PreprocessingMax. Water content
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Covestro Bayblend® T90 MF-20* Polycarbonate + ABS, Mineral Filled
Developmental productInjection molding grade20 % mineral filledvery good flowreduced coefficient of thermal dilatationtensile modulus = 5200 MPaVicat/B 120 = 130 °CPreprocessingMax. Water content
Dielectric Strength 35.0 kV/mm
889 kV/in
dry; IEC 60243-1
DSM Akulon® K224-G8 PA6-GF40
40% Glass Reinforced
Dielectric Strength 35.0 kV/mm
889 kV/in
conditioned; IEC 60243-1
EMS-Grivory Grivory® BG-40 S PA6-GF40
Product description: Grilon BG-40 S is a normal viscosity PA 6 injection molding type with 40% glass fibers. Grilon BG-40 S has the following important properties: High stiffnessExcellent surface fi..
Dielectric Strength 35.0 kV/mm
889 kV/in
dry; IEC 60243-1
DSM Stanyl® TE200F8 PA46-GF40
40% Glass Reinforced, Heat Stabilized, for E&E applications
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 243-1
CP-Polymer-Technik Wellamid® 6000 MRGV 25/15 HWCP 25% Mineral and 15% Glass Fiber Nylon 6, Heat Stabilized, Dry
Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 243-1
CP-Polymer-Technik Wellamid® 6000 MZ 301 CP Combination Nylon 6, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 243-1
CP-Polymer-Technik Wellamid® 6000/50 HWUVCP Nylon 6, Impact Modified Until 0°C, UV Stabilized, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength 35.0 kV/mm
889 kV/in
dry; IEC 60243-1
EMS-Grivory Grivory® G4V-5H nat PA*-GF50
Product description: Grivory G4V-5H is a 50% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline partially aromatic copolyamide. Grivory G4V-5H is used for injectio..
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 243-1
CP-Polymer-Technik Wellamid® 6600 MRGV 25/15 HWCP 25% Mineral and 15% Glass Fiber Nylon 66, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Dielectric Strength 35.0 kV/mm

@Thickness 1.00 mm
889 kV/in

@Thickness 0.0394 in
ASTM D877
ChevronTexaco Rando® HDZ 68
Texaco Rando HDZ oils deliver value through:High oxidation stability — Longer service life than attainable with conventional lubricants used in high pressure service.Protection against rust and cor..
Dielectric Strength 35.0 kV/mm
889 kV/in
conditioned; IEC 60243-1
EMS-Grivory Grivory® LV-15H nat PA12-GF15
Product description: Grilamid LV-15H is a 15% glass fiber reinforced, heat stabilized polyamide 12 injection molding grade with the following product profile: very low water absorptiongood dimension..
Dielectric Strength 35.0 kV/mm
889 kV/in
conditioned; IEC 60243-1
EMS-Grivory Grivory® LV-3H PA12-GF30
Product description: Grilamid LV-3H is a 30% glass fiber reinforced, heat stabilized polyamide 12 injection molding grade with the following product profile: very low water absorptionhigh dimensiona..
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
DSM Akulon® S223-HG7 Nylon 66-35% Glass Reinforced (European and Asian Grade) (Dry)
The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Celanese Hostaform® C 52021 POM, Unfilled
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Dielectric Strength 35.0 kV/mm
889 kV/in
Arkema Group Orgalloy® R 6030 Nylon 6 Alloy, 30% Glass fiber (Conditioned)
Rigid polyamide 6 alloy: easy to process, low moisture absorption, chemical resistance (no known solvents).Special 30% glass fiber reinforced for overmolding with modified PP.ISO data provided by th..
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Celanese Hostaform® C 13021 POM, Unfilled
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Celanese Hostaform® C 9021 M POM, Tribological
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Celanese Hostaform® C 27021 XAP C POM
POM copolymerReduced Emissions and MigrationsInformation provided by Celanese
Dielectric Strength 35.0 kV/mm
889 kV/in
in transformer oil; IEC 60243-1
CENTROPLAST CENTROMID 12 GF 30 Polyamide 12 30% glass fiber
CENTROMID 12 GF 30 is a dimensionally stable and high strength material with good electrical insulating properties. Its applications include levers and valve parts.Information provided by CENTROPLA..
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Celanese Hostaform® C 13021 RM POM, Tribological  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding grade with moderate flow, with improved friction propertiesInformation provided by Celanese
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Celanese Hostaform® C 9021 AW POM, Tribological  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding type like C 9021, with special additive modifiedInformation provided by Celanese
Dielectric Strength 35.0 kV/mm
889 kV/in
IEC 60243-1
Celanese Hostaform® C 9021 M XAP²™ POM, Tribological  (Unverified Data**)
POM copolymerwith molybdenum disulphide modified, low emissionInformation provided by Celanese
Copyright © lookpolymers.com All Rights Reserved