Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Density = 1.12 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Density 1.12 g/cc
0.0405 lb/in³
Premix Thermoplastics PRE-ELEC® PE 1299 Conductive Thermoplastic Compound
PRE-ELEC® PE 1299 is a conductive thermoplastic masterbatch/compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. PRE-ELEC® PE 1299 has a high concentration o..
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Polykemi AB POLYfill PPH GF5030 PB Polypropylene Homopolymer, Glass Fibre-Reinforced, Chemically Coupled
Information provided by Polykemi AB
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Nilit FRIANYL B63 V2 Nylon 6.6 for injection molding
Nylon 6.6 for injection molding, flame retardant.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Density 1.12 g/cc
0.0405 lb/in³
Dry As Molded
Ineos ABS TRIAX® 1408 GF ABS/Nylon Blend, Injection Grade, As Conditioned  (discontinued **)
Standard injection molding grade, easy flow, easy mold release, fast setting.Applications: Thin walled engineering parts. Automotive sector: air filters, switch and connector parts for car electric...
Density 1.12 g/cc
0.0405 lb/in³
ASTM D792
Gichem GIBLEND E45400 Polycarbonate / ABS  (discontinued **)
Polycarbonate and ABS blend, high fluidity. Medium Injection speed.Information provided by GICHEM Gruppo Industriale Chimico
Density 1.12 g/cc
0.0405 lb/in³
Injection molded; ASTM D792
Huntsman IROGRAN® A 75 P 4655 N TPU-Polyester
Introduction: IROGRAN A 75 P 4655 N is a black colored polyether based thermoplastic polyurethane intended for injection molding applications. IROGRAN A 75 P 4655 N is a part of the HUNTSMAN injecti..
Density 1.12 - 1.13 g/cc
0.0405 - 0.0408 lb/in³
Fibre Glast 2000 / 2120 System 2000 Epoxy
System 2000 Epoxy Resin is a low viscosity, light amber laminating resin that is designed for fabricating parts and other demanding structural applications. Use this system to maximize the physical ..
Density 1.12 g/cc
0.0405 lb/in³
Cured Solid
KiON CERASET® POLYUREASILIZANE 20 (PURS 20)
General DescriptionKiON Ceraset Polyureasilazane is a liquid polymer that can easily be converted to a solid pre-ceramic and then be pyrolyzed to either silicon carbide or silicon nitride-containing..
Density 1.12 g/cc
0.0405 lb/in³
DIN 53479; ASTM D792
Kolon Kopa® KN173HI Nylon 6 Resin
KOPA is widely used in the automobile and industrial parts.General KOPA N-6 Features: Good mechanical properties, Extreme toughness, Outstanding self-lubrication and abrasion resistance, Excellent c..
Density 1.12 g/cc
0.0405 lb/in³
ASTM D792
Techmer ES HiFill® PP 0121 B Polypropylene
Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforInformation provided by TP Composites, Inc.
Density 1.12 g/cc
0.0405 lb/in³
Struktol POLYDIS 3622 Elastomer modified epoxy prepolymer
Applications: STRUKTOL VP 3622 is used where conventional epoxy systems and prepolymers are unable to satisfy the demands of for example impact, flexural and peel strength.Information provided by St..
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Wellman Wellamid® 22LHI3 XE-N Impact Modified Nylon 66, Lubricated & Heat Stabilized
Typical Applications: Automotive fasteners, living hinge, head lamp adjustment devices, ink pen components, wire separators, hardware components, window installation clips, safety equipment.Data pro..
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Covestro Desmopan® 9385 Polyurethane
Extrusion- and injection molding gradevery good hydrolysis and microbial resistancegood low-temperature flexibilitycomplies with VDE 0282-10ApplicationCable sheathingsHosesnon-reinforcedPreprocessin..
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Covestro Desmopan® DP 1970AW Polyurethane
As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
Density 1.12 g/cc
0.0405 lb/in³
DSM Somos® BioClear
Parts created with Somos® BioClear are designed for medical applications that are non-implant and have limited contact with the body such as device prototyping. They are shatter-resistant so they w..
Density 1.12 g/cc
0.0405 lb/in³
DuPont™ Nomex® 418 Paper, 10 mil Nominal Thickness
Nomex® Type 418 is designed for high-voltage applications such as motor conductor and coil wrap, transformer ground and layer insulation. It can be readily impregnated with varnishes. This calen..
Density 1.12 g/cc
0.0405 lb/in³
ASTM D792, ISO 1183
EPICHEM Epilac R ABS 10% GF Acrylonitrile Butadiene Styrene, 10% Glass Fiber
Characteristics: 10% glass fibre filled
Density 1.12 g/cc
0.0405 lb/in³
ASTM D792
Aclo Accutech Polypropylene Homopolymer HP0334C30L1 Calcium Reinforced
Density 1.12 - 1.14 g/cc
0.0405 - 0.0412 lb/in³
ASTM D792
Cast Nylons Nycast® SLX Premium Bearing Grade Nylon
Nycast® SLX closes the gap between static and dynamic coefficients of friction. Used in wear pads, bearing blocks, and other load-bearing slide applications.Data provided by the manufacturer, Cast..
Density 1.12 g/cc
0.0405 lb/in³
Fired at 5 hrs at 816°C
BNZ Materials Bazelite 2300 Insulating Castable
Blazelite 2300 is a lightweight, general purpose insulating castable. Can be used for back-up or exposed to furnace conditions. Used for one-shot linings, petrochemical heaters, combustion chambers ..
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Celanese Celstran® PP-GF30-03-Black PP, 30% Glass Reinforced
30% long glass fiber reinforced, chemically coupled, heat stabilized, Polypropylene BLACKInformation provided by Celanese
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Celanese Celstran® PP-GF30-0403 P10 PP, 30% Glass Reinforced
Material code according to ISO 1043-1: PPInformation provided by Celanese
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Celanese Celstran® PP-GF30-0501P10 PP, 30% Glass Reinforced
Material code according to ISO 1043-1: PPInformation provided by Celanese
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Celanese Celstran® PP-GF30-0553 Black PP, 30% Glass Reinforced
Material code according to ISO 1043-1: PPInformation provided by Celanese
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Celanese Celstran® PP-GF30-05 PP, 30% Glass Reinforced
Material code according to ISO 1043-1: PPCelstran PPInformation provided by Celanese
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Celanese COMPEL PP-GF30-04 PP, Glass Reinforced
Heat Stabilized Polypropylene reinforced with 30% long glass fiberIt is normally not necessary to dry CELSTRAN PP. However, should there be surface moisture (condensate) on the molding compound as a..
Density 1.12 g/cc
0.0405 lb/in³
Ineos ABS TRIAX® 1408 GF ABS/Nylon Blend, Injection Grade, Dry as Molded  (discontinued **)
Injection molding grade, higher stiffness, good stress corrosion cracking resistance and chemical resistance (fuel, cleaning agents).Information provided by Bayer.LANXESS was spun-off from Bayer in ..
Density 1.12 g/cc
0.0405 lb/in³
ASTM D792
Polymer Resources PPX-SF1 Modified PPO, Structural Foam Grade, Easy Flow  (Unverified Data**)
Process: Foam MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Foam grades tested with foamed parts with a 10% weight reduction rel..
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Celanese Celstran® PP-GF30-10 PP, 30% Glass Reinforced
30% long fiber glass reinforced, enhanced flow, UV stabilized, PolypropyleneIt is normally not necessary to dry CELSTRAN PP. However, should there be surface moisture (condensate) on the molding com..
Density 1.12 g/cc
0.0405 lb/in³
ISO 1183
Unitika EX-1020K PA6, Dry
Conducting nylonInformation provided by Unitika Ltd.
Copyright © lookpolymers.com All Rights Reserved