Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.960 g/cc | 0.0347 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Cycolac® INP338T ABS SABIC INP338T is an ultra high rubber ABS impact modifier resin, and is based on polybutadiene rubber. Offers superior impact efficiency, especially at low temperatures. Reduces notch sensitivity wh.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ISO 1183 |
Polykemi AB POLYfill PPH TS15010 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ISO 1183 |
Quadrant EPP Cesticolor™ HD 500 Polyethylene Data provided by Quadrant Engineering Plastic Products for polymers in their European product line. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ISO 1183 |
Quadrant EPP Cestilene™ HD 500 Polyethylene Data provided by Quadrant Engineering Plastic Products for polymers in their European product line. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ISO 1183-1 |
Quadrant EPP TIVAR® SuperPlus PE-UHMW + specific additives (ISO Data) TIVAR SuperPlus is a wear optimised, partially cross-linked PE-UHMW material with extremely high degree of polymerisation for use in most demanding applications and environments. When used for drain.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D-792 |
Polyram BondyRam® 2001 Maleic Anhydride modified EVA coupling agent
(discontinued **) Maleic Anhydride Modified grafted EVA (28%VA) recommended as adhesive promoter and general purpose compatibilizerInformation provided by Polyram Ram On Ind. |
|||
Density | 0.960 - 1.34 g/cc | 0.0347 - 0.0484 lb/in³ | Average value: 1.07 g/cc Grade Count:42 |
Overview of materials for Polypropylene, Mineral Reinforced, Impact Modified This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene, Mineral Reinforced, Impact Modified". Each property range of values reported is minimum a.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | |
JPJ Technologies 5200B HDPE Blow Molding Information provided by JPJ Technologies |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 |
Techmer ES HiFill® PP 0096 S2 LE Polypropylene Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforFeatures: Low ExtractablesInformation provided by TP Composites, Inc. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | |
Silon Taborex TA 2111 HD Catalyst Masterbatch Masterbatch for the use with SILON Silane crosslinkable PE-Xb Compounds TA 1108 HD, TA 1109 HD. TA 2111 HD contains the cross-linking catalyst to complete together with the above-mentioned graft a S.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP MF002S PP LNP* Thermocomp* MF002S is a compound based on Polypropylene resin containing 10% Glass Fiber. Added features of this material include: Heat Stabilized. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 |
Teknor Apex Sarlink® 4155 Thermoplastic Elastomer A highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4155 is a low hardness grade possessing exceptional tensile strength, superior compression set, chemical re.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 |
Teknor Apex Sarlink® 4480 Thermoplastic Elastomer A NSF certified, highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4480 is a medium hardness grade possessing exceptional tensile strength, superior compressio.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ISO 1183 |
Unipetrol PE HD LITEN® MB/ML 62 HDPE Made for injection molding applications.Information provided by Unipetrol RPA |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 - ISO 1183 |
DuPont Elvaloy® HP662 Ethylene/N-Butyl Acrylate/Carbon Monoxide Copolymer Specialized copolymers deliver flexibility, toughness and weatherability to adhesives, plastics, highways and roofing.Availability: GloballyInformation provided by DuPont. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | |
Von Roll Isola IMI Varnish 271 Spirit Gum Varnish for Electrical Insulation Data provided by Von Roll Isola USA.Flash Point: |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | Placing Density |
Zircar Ceramics SALI Moldable Alumina Insulation A close cousin to premium grade Type SALI insulation, SALI Moldable is a thick doughy material readily shaped into complex forms using molds & hand building techniques or applied to surfaces. When .. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D 792 |
Cossa Polimeri ESTAPROP KUR 1010 TG05 Polypropylene, 5% Mineral Filled PP copolymer 5% mineral fillerElastomer modified, very high impact strength at low temperatureInformation provided by Cossa Polimeri S.r.l. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | |
Dow Corning SYL-OFF® PMCPSL 3000 Catalyst 1,000 ppm platinum in vinyl polymerInformation provided by Dow Corning |
|||
Density | 0.960 g/cc @Temperature 260 °C |
0.0347 lb/in³ @Temperature 500 °F |
Melt |
Covestro Bayblend® T65 Polycarbonate + ABS General purpose injection molding gradeVicat/B 120 temperature = 120 °Cgood low temperature impact strengthPreprocessingMax. Water content |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ISO 1183 |
ExxonMobil Exxtral™ BMU 139 Performance Polyolefin Product Description: A specialty thermoplastic polyolefin resin characterized by a good stiffness/toughness balance for automotive exterior applications such as bumper fascia.Availability: Asia Paci.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 |
DuPont™ Surlyn® 9950 Ionomer Resin, Zinc Surlyn® 9950 thermoplastic resin is an advanced ethylene/methacrylic acid (E/MAA) copolymer, in which the MAA acid groups have been partially neutralized with zinc ions. The amount of MAA and neutr.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 |
Buckeye Polymers BP PPC 0212 R Reprocessed Polypropylene, Unfilled Blk/WhiteThis reprocessed product is successful in applications where cost is a major specification, yet physical characteristics require product performance. Industrial recycled resin compounds ar.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D1505 |
Amco PRIMATOP HDPE RP 004 Granular High Density Polyethylene HDPE RP 004 features small particle size and is used in plastic lumber extrusion.Former A-Top Polymers product; part of Amco product line since 2013. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ISO 1183 |
Barlog Plastics KEBAFLEX E 75.1 TPE-V, Shore A75 TPE-VInformation provided by BARLOG plastics GmbH. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | B Component; ASTM D1475 |
Aptek 2503-A/B Low modulus urethane conformal coating APTEK 2503-A/B is an unfilled, two component, electrically insulating, transparent, flexible urethane coating system designed for the encapsulation and protection of electronic services mounted on p.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | |
3M 4658F Double Coated Removable Foam Tape with Adhesive 100 3M™ Double Coated Removable Foam Tape 4658F is a clear, double coated acrylic foam tape that removes cleanly from many surfaces. 3M™ Adhesive 100 is a firm acrylic adhesive system that offers high.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | Compound; ISO 1183/ISO 1872-2B |
Borealis Borstar® HE3490-LS Black High Density Polyethylene for Pressure Pipes Borstar HE3490-LS is a black, bimodal, high density polyethylene classified as an MRS 10.0 material (PE100) produced by the advanced Borstar technology. Well dispersed carbon black gives outstanding.. |
|||
Density | 0.960 g/cc | 0.0347 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP STAT-KON MS000IL PP LNP* STAT-KON* MS000IL is a compound based on Polypropylene resin containing Stainless Steel. Added features of this material include: High Impact, Low Extractible, Electrically Conductive, food c.. |