POLYMER SEARCH

Styrolution LuranÂ® S 796 M Colored ASA

Category	Polymer , Thermoplastic , ASA Polymer
Manufacturer	Styrolution
Trade Name	Luran®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution LuranÂ® S 796 M Colored ASA.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: High-impact injection molding gr4ade with good flowability.Applications: Trim panels for goods vehicles.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/inÂ³	ISO 1183
Water Absorption	1.65 %	1.65 %	Equilibrium; ISO 62
	0.45 % @Time 86400 sec	0.45 % @Time 24.0 hour	ISO 62
Moisture Absorption at Equilibrium	0.35 %	0.35 %	23Â°C/50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.0040 - 0.0070 cm/cm	0.0040 - 0.0070 in/in
Melt Flow	9.63 g/10 min @Load 10.0 kg, Temperature 220 Â°C	9.63 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	65.0 MPa @Load 36.5 kg, Time 30.0 sec	9430 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Tensile Strength, Yield	41.0 MPa	5950 psi	50 mm/min; ISO 527-1/-2
Elongation at Break	13 %	13 %	Nominal, 50 mm/min; ISO 527-1/-2
Elongation at Yield	3.5 %	3.5 %	50 mm/min; ISO 527-1/-2
Tensile Modulus	2.00 GPa	290 ksi	ISO 527-1/-2
Flexural Strength	60.0 MPa	8700 psi	ISO 178
Poissons Ratio	0.43	0.43	Calculated
Shear Modulus	0.700 GPa	102 ksi	ISO 6721-2
Izod Impact, Notched	6.00 J/cm	11.2 ft-lb/in	ASTM D256
Charpy Impact Unnotched	15.0 J/cmÂ² @Temperature -30.0 Â°C	71.4 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1eU
	25.0 J/cmÂ² @Temperature 23.0 Â°C	119 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eU
Charpy Impact, Notched	0.500 J/cmÂ² @Temperature -30.0 Â°C	2.38 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1eA
	3.00 J/cmÂ² @Temperature 23.0 Â°C	14.3 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	80.0 - 110 Âµm/m-Â°C @Temperature 23.0 - 80.0 Â°C	44.4 - 61.1 Âµin/in-Â°F @Temperature 73.4 - 176 Â°F	ISO 11359-1/-2
Thermal Conductivity	0.170 W/m-K	1.18 BTU-in/hr-ftÂ²-Â°F	DIN 52612-1
Maximum Service Temperature, Air	80.0 Â°C	176 Â°F
Deflection Temperature at 0.46 MPa (66 psi)	100 Â°C	212 Â°F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	95.0 Â°C	203 Â°F	ISO 75-1/-2
Vicat Softening Point	90.0 Â°C	194 Â°F	VST/B/50; ISO 306
	104 Â°C	219 Â°F	VST/A/50; ISO 306
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	IEC 60695-11-10
	HB @Diameter 4.00 mm	HB @Diameter 0.157 in	IEC 60707

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	3.3 @Frequency 1.00e+6 Hz	3.3 @Frequency 1.00e+6 Hz	IEC 60250
	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	IEC 60250
Dielectric Strength	35.0 kV/mm	889 kV/in	K20/P20; IEC 60243-1
Dissipation Factor	0.010 @Frequency 100 Hz	0.010 @Frequency 100 Hz	IEC 60250
	0.025 @Frequency 1.00e+6 Hz	0.025 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	Test Liquid A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	240 - 280 Â°C	464 - 536 Â°F	Injection Molding
Mold Temperature	40.0 - 80.0 Â°C	104 - 176 Â°F	Injection Molding
Drying Temperature	80.0 Â°C	176 Â°F	Pre-drying
Dry Time	2 - 4 hour	2 - 4 hour	Pre-drying

Descriptive Properties	Value	Comments
Color	Gray 28664
	White 00260
	White 31573
	White 33204
	White 36175
	White 36830
Commercial Status	Europe
Primary Processing Technique	Injection Molding

Users viewing this material also viewed the following: