Polymer Property : Surface Resistance = 1.00e+13 ohm Product List

Electrical Properties

Tips: 30 items are displayed at most.

Electrical Properties	Metric	English	Comments
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	ISO.167 DN.53482
Polimersan Plastics POLIPOLEN® (Polyethylene) HD-PE 300 PE 300: Polyethylene with high density. POLIPOLEN® PE (POLYETHYLENE) is maintained from coke oven gas or from natural gas or from Ethene or Ethane which is produced by cracking of petroleum. Monom..
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	ROA; IEC 60093
SABIC Innovative Plastics GELOY HRA170D ASA+PC (Europe-Africa-Middle East) GELOY HRA170D resin is a PC-ASA blend with permanent antistatic behavior. It is typically used in applications that require antidust properties and high impact retention. Geloy HRA170D resin is typi..
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	IEC 93
Quadrant EPP Cestilene™ HD 1000 Polyethylene Data provided by Quadrant Engineering Plastic Products for polymers in their European product line.
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Lanxess DurethanÂ® B 40 FAM 000000 Nylon 6, Film Grade PA 6 film grade of high viscosity with high slip agent and lubricant content, not nucleatedApplication Examples: flat and blown film with good surface slip and smoothness - including in the freshly ..
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Lanxess DurethanÂ® B 40 FKA 000000 Nylon 6, Film Grade PA 6 film grade of high viscosity, nucleated and lubricated, in compliance with FDA for food contactApplication Examples: flat and blown film, flat film coextrusion for PA/PE composite films
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Lanxess DurethanÂ® BKV 130 000000 Copolyamide, 30% Glass Fiber CoPA, injection molding grade, 30% glass fibers, elastomer modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 30, even in..
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	cond.; IEC 60093
Lanxess DurethanÂ® A 30 S FN31 000000 Nylon 66, Flame Retardant PA 66, non-reinforced, injection molding, halogen-free flame retardant, improved flowabilityInformation provided by LANXESS.
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Polyram PlusTek PA350M6 Nylon 6.6 for Injection Molding, 30% Mineral Reinforced 30% Minerals Reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram.
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
EMS-Grivory Grivory® L 16 GM nat PA12 Grilamd L16 GM is a low-viscosity, non-reinforced PA 12 grade, UV- and heat-stabilized. The modification with a crystallization regulator causes a quick freeze and a fine, crystalline structure. Due..
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Eurotec® Tecomid® NA30 GR50 BK002 XA40 PA6.6, 50% glass fiber reinforced, flame retardant, heat stabilized, natural Information provided by Eurotec®
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Eurotec® Tecomid® NA40 GR15 GR003 XA70 PA6.6, 15% glass fiber reinforced, flame retardant - halogen free (RoHS compliant), heat stabilized, grey RAL 7035 Information provided by Eurotec®
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Eurotec® Tecomid® NA40 GR40 NL HS PA6.6, 40% glass fiber reinforced, heat stabilized, natural Information provided by Eurotec®
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Eurotec® Tecomid® NA40 KG30 NL 0B PA6.6, 30% glass fiber/glass bead reinforced, natural Information provided by Eurotec®
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Eurotec® Tecomid® NB40 GR15 NL XA70 PA6, 15% glass fiber reinforced, flame retardant - halogen (RoHS compliant), heat stabilized, natural Information provided by Eurotec®
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Eurotec® Tecomid® NB40 KK30 NL PA 6 30% glass fiber/mineral reinforced, low warpage Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good..
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Eurotec® Tecomid® NT40 GR15 NL HS PPA, 15% glass fiber reinforced, heat stabilized, natural Information provided by Eurotec®
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Eurotec® Tecomid® NA40 AR20 NL HS PA6.6, 20% aramid fiber reinforced, heat stabilized, natural Information provided by Eurotec®
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	Conditioned; CEI 60093
Addiplast Addilene PMD 50218 Flame Retardant Polypropylene Flame retardant, unreinforced, with halogensInformation provided by Addiplast.
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Barlog Plastics KEBATER A1100 PBT/PC unreinforced, high impact PBT+PCInformation provided by BARLOG plastics GmbH.
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
CENTROPLAST CENTROMID 6 G Polyamide 6 Cast This material has good machinability and can be bonded or welded. Its applications include sliding bearings, hammerheads, and toothed gears.Information provided by CENTROPLAST Engineering Plastics ..
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	50%RH; IEC 60093
DuPont Performance Polymers Zytel® 70G25HSLR NC010 Nylon 66  (Unverified Data**) 25% Glass Reinforced Heat Stabilized Hydrolysis Resistant Polyamide 66 Zytel 70G25HSLR NC010 is a 25% glass fiber reinforced heat stabilized hydrolysis resistant polyamide 66 resin for injection mol..
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	DIN 53 482
Hippe PS Polystyrene Amorphous thermoplastic with brilliant surface. High hardness and stiffness, but brittle and susceptible to impact. Very good dielectric properties. Physiologically safe if it falls below a parti..
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	ASTM D257
Gromax PBT 1100-211MB Product Description: PBT unreinforced middle viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce..
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	DIN 53482
Polyram PlusTek RA320G6 Nylon 6.6, 30% Glass Fiber, Flame Retardant 30% glass fiber reinforced, flame retardant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Surface Resistance	1.00e+13 ohm <br>@Temperature 23.0 °C	1.00e+13 ohm <br>@Temperature 73.4 °F	50%RH; IEC 60093
DuPont Performance Polymers Zytel® 70G35HSLX BK357 Nylon 66  (Unverified Data**) Zytel® 70G35HSLX BK357 is a 35% glass fiber reinforced, heat stabilized, black polyamide 66 for injection molding.Information provided by DuPont Performance Polymers
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	ASTM D257
DuPont Performance Polymers Rynite® 530HTE NC010 Polyethylene Terephthalate (PET)  (Unverified Data**) 30% Glass Reinforced Polyethylene Terephthalate with Excellent High Temperature Dielectric PropertiesRynite 530HTE NC010 is a 30% glass reinforced modified polyethylene terephthalate resin with exce..
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	CEI 60093
Addiplast Addinyl B25 V25 Flame Retardant Nylon 6, 25% Glass Filled Flame retardant, 25% glass fiber reinforced, with halogensInformation provided by Addiplast.