Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Dry Time = 2 hour Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Dry Time 2 - 4 hour
2 - 4 hour
in desiccant air dryer
Polykemi AB POLYabs S20 ABS
Information provided by Polykemi AB
Dry Time 2 - 4 hour
2 - 4 hour
in desiccant air dryer
Polykemi AB POLYfill PPH GF5020 HC Polypropylene Homopolymer, Glass Fiber Reinforced
Information provided by Polykemi AB
Dry Time 2 - 4 hour
2 - 4 hour
in desiccant air dryer
Polykemi AB POLYfill PPH GF5020 PD2 Polypropylene Homopolymer, Glass Fibre-Reinforced, Chemically Coupled
Information provided by Polykemi AB
Dry Time 2 - 4 hour
2 - 4 hour
Ravago Manufacturing Americas Hylon® N2040MGHL Nylon 6 (DAM)
Information provided by Ravago.
Dry Time 2 hour
2 hour
PolyOne Edgetek® PS-1000 Polybutylene Terephthalate (PBT)  (discontinued **)
Description/Features:UL 94 HBPolyOne First ChoiceInformation provided by PolyOne Corporation.
Dry Time 2 hour
2 hour
PolyOne Edgetek® RA-20CF/000 Polyarylsulfone, Carbon Fiber Reinforced  (discontinued **)
Carbon Fiber ReinforcedPolyOne First ChoiceInformation provided by PolyOne Corporation.
Dry Time 2 - 4 hour
2 - 4 hour
in desiccant air dryer
Polykemi AB POLYfill PPH T20020 UV Polypropylene Homopolymer, Mineral Reinforced, UV-Stabilized
Information provided by Polykemi AB
Dry Time 2 - 4 hour
2 - 4 hour
PTS PCA-2010NHV Non-Bromine, Non-Chlorine, Flame Retardant UV PC/ABS Alloy
This is a non-halogenated flame retardant, UV stabilized grade. Information provided by Polymer Technology and Services, LLC (PTS).
Dry Time 2 hour
2 hour
Drying not normally required
Fiberfil® J-60/15/E Polypropylene Homopolymer, 15% Glass Reinforced, Chemically coupled
Information provided by FIBERFIL Engineered Plastics
Dry Time 2 - 4 hour
2 - 4 hour
Multibase Multi-Flex® A 3005 TPE Thermoplastic Elastomer
Features: Chemical Resistance, Good Colorability, GoodElasticity, HighElectrically InsulatingFlame RetardantFlexibility, GoodHardness, LowFoamableHeat StabilizedGeneral PurposeOzone ResistantProce..
Dry Time 2 - 4 hour
2 - 4 hour
Pre-drying
Styrolution Luran® S 778 UV Colored ASA
Description: Injection molding grade with enhanced toughness and resistance to heat distortion. Especially suitable for exterior automotive components (e.g. radiator grills, rear end appliqué pan..
Dry Time 2 - 4 hour
2 - 4 hour
Opened bags and gaylord boxes
Wellman Wellamid® GB1430-N 33% Glass Bubble Filled, Low Density Nylon 66
Description: Glass Bubble Filled, Low Density Nylon 66Information provided by Wellman.
Dry Time 2 - 4 hour
2 - 4 hour
Opened bags and gaylord boxes
Wellman Wellamid® GS25-66 22LH-N 25% Glass Sphere Filled Nylon 66, Lubricated & Heat Stabilized
Typical Applications: Potentiometer liners, electrical coil forms, automotive window lift and power door lock switch bodies, gears, thick wall section moldings, emission control valves.Data provided..
Dry Time 2 - 4 hour
2 - 4 hour
Predrying
A. Schulman ComAlloy® E-12421 Reinforced High Flow Polyamide
Information provided by A. Schulman.The ComAlloy product line has been integrated into the A Schulman product line.
Dry Time 2 - 4 hour
2 - 4 hour
Predrying
A. Schulman SCHULADUR® A GF20HI 20% Glass Fiber Reinforced, High Impact PBT
Information provided by A. Schulman.
Dry Time 2 - 4 hour
2 - 4 hour
Diamond Polymers ABS 2512
Description: Injection Molding Grade, Medium Impact, High FlowInformation provided by Diamond Polymers, Inc.
Dry Time 2 - 4 hour
2 - 4 hour
Diamond Polymers ABS VP-12
Description: Flame Retardant with UVInformation provided by Diamond Polymers, Inc.
Dry Time 2 - 4 hour
2 - 4 hour
Diamond Polymers SE 3 HH
Description: High Heat ABSInformation provided by Diamond Polymers, Inc.
Dry Time 2 - 4 hour
2 - 4 hour
Diamond Polymers ABS 7501
Description: Injection Molding Grade, Extra High ImpactInformation provided by Diamond Polymers, Inc.
Dry Time 2 - 4 hour
2 - 4 hour
in circulation dryer
Polykemi AB POLYabs F00 GF17 ABS, Glass Fiber-Reinforced
Information provided by Polykemi AB
Dry Time 2 - 4 hour
2 - 4 hour
in circulation dryer
Polykemi AB POLYfill PPH T8030 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Dry Time 2 - 4 hour
2 - 4 hour
in desiccant air dryer
Polykemi AB POLYfill PPH TS4040 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Copyright © lookpolymers.com All Rights Reserved