Premix Thermoplastics PRE-ELEC® PA 1412 Conductive Thermoplastic Compound

Category	Polymer , Thermoplastic , Nylon , Nylon 6
Manufacturer	Premix Thermoplastics Inc.
Trade Name	PRE-ELEC®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Premix Thermoplastics PRE-ELEC® PA 1412 Conductive Thermoplastic Compound.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PRE-ELEC® PA 1412 is a conductive thermoplastic compound based on polyamide 6. Conductivity is achieved by using conductive carbon black. In addition to a low electrical resistivity PRE-ELEC® PA 1412 has an excellent balance of mechanical properties and is easy to injection mould.Applications: Injection moulded housings, boxes and technical parts. PRE-ELEC® PA 1412 is well suited for applications where the good mechanical properties of polyamide are required. PRE-ELEC® PA 1412 can also be extruded.Processing: PRE-ELEC® PA 1412 compound can be processed in the injection moulding machines using normal processing conditions as with polyamide.Test Specimen: 10[mm] wide moulded rodInformation from Premix OY

Physical Properties	Metric	English	Comments
Density	1.20 g/cc	0.0434 lb/in³
Thickness	102 microns	4.00 mil
Linear Mold Shrinkage	0.016 - 0.022 cm/cm	0.016 - 0.022 in/in	ISO 294-4
Melt Flow	4.5 g/10 min @Load 5.00 kg, Temperature 275 °C	4.5 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133
	26 g/10 min @Load 10.0 kg, Temperature 275 °C	26 g/10 min @Load 22.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	85	85	ISO 868
Tensile Strength	55.0 MPa	7980 psi	ISO 527
Tensile Strength, Yield	63.0 MPa	9140 psi	ISO 527
Elongation at Break	35 %	35 %	ISO 527
Elongation at Yield	9.0 %	9.0 %	ISO 527
Flexural Modulus	1.50 GPa	218 ksi	ISO 178
Izod Impact, Notched (ISO)	10.0 kJ/m² @Thickness 4.00 mm, Temperature -20.0 °C	4.76 ft-lb/in² @Thickness 0.157 in, Temperature -4.00 °F	ISO 180
	15.0 kJ/m² @Thickness 4.00 mm, Temperature 23.0 °C	7.14 ft-lb/in² @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
Izod Impact, Unnotched (ISO)	NB @Thickness 4.00 mm, Temperature 23.0 °C	NB @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
	NB @Thickness 4.00 mm, Temperature -20.0 °C	NB @Thickness 0.157 in, Temperature -4.00 °F	ISO 180
Charpy Impact Unnotched	NB @Thickness 102 mm, Temperature 23.0 °C	NB @Thickness 4.00 in, Temperature 73.4 °F	ISO 179
	NB @Thickness 102 mm, Temperature -20.0 °C	NB @Thickness 4.00 in, Temperature -4.00 °F	ISO 179
Charpy Impact, Notched	3.00 J/cm² @Thickness 102 mm, Temperature 23.0 °C	14.3 ft-lb/in² @Thickness 4.00 in, Temperature 73.4 °F	ISO 179
	4.00 J/cm² @Thickness 102 mm, Temperature -20.0 °C	19.0 ft-lb/in² @Thickness 4.00 in, Temperature -4.00 °F	ISO 179

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	152 °C	306 °F	75/Method Bf
Deflection Temperature at 1.8 MPa (264 psi)	60.0 °C	140 °F	75/Method Af
Vicat Softening Point	180 °C	356 °F	ISO 306/B50
	210 °C	410 °F	ISO 306/A50

Electrical Properties	Metric	English	Comments
Volume Resistivity	<= 1000 ohm-cm	<= 1000 ohm-cm	ISO D-257
Surface Resistance	<= 1e+05	<= 1e+05	ISO IEC 61340-5-1

Processing Properties	Metric	English	Comments
Zone 1	250 °C	482 °F	Cylinder
	270 °C	518 °F	Die
Zone 2	260 °C	500 °F	Cylinder
	270 °C	518 °F	Die
Zone 3	260 °C	500 °F	Die
	260 °C	500 °F	Cylinder
Zone 4	260 °C	500 °F	Cylinder
	270 °C	518 °F	Die
Zone 5	270 °C	518 °F	Die
	270 °C	518 °F	Cylinder
Melt Temperature	220 - 280 °C	428 - 536 °F
Mold Temperature	60.0 - 80.0 °C	140 - 176 °F
Roll Temperature	70.0 °C	158 °F	3rd Roll
	80.0 °C	176 °F	2nd Roll
	90.0 °C	194 °F	1st Roll
Drying Temperature	80.0 °C	176 °F	Pre-drying
Dry Time	2 - 4 hour	2 - 4 hour
Injection Pressure	60.0 - 80.0 MPa	8700 - 11600 psi
Shelf Life	12.0 Month	12.0 Month	Normal Storing Conditions

Descriptive Properties	Value	Comments
Injection Speed	Moderate

Users viewing this material also viewed the following: