Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polykemi AB POLYfill PPH 30030DNH Polypropylene Homopolymer, Flame Retardant, Halogen Free

Category Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Flame Retardant
Manufacturer Polykemi AB
Trade Name POLYfill
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Polykemi AB POLYfill PPH 30030DNH Polypropylene Homopolymer, Flame Retardant, Halogen Free.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Information provided by Polykemi AB
Physical Properties Metric English Comments
Density 1.11 g/cc
0.0401 lb/in³
ISO 1183
Melt Index of Compound 30 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 30 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength at Break <= 25.0 MPa
<= 3630 psi
ISO/R527
Elongation at Yield 5.5 %
5.5 %
ISO/R527
Flexural Strength <= 45.0 MPa
<= 6530 psi
ISO 178
Flexural Modulus 2.00 GPa

@Temperature 23.0 °C
 290 ksi

@Temperature 73.4 °F
 ISO 178
Charpy Impact, Notched 0.150 J/cm²

@Temperature -20.0 °C
 0.714 ft-lb/in²

@Temperature -4.00 °F
 ISO 179
0.250 J/cm²

@Temperature 23.0 °C
 1.19 ft-lb/in²

@Temperature 73.4 °F
 ISO 179
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 100 °C
212 °F
120°C/h; ISO 75/1
Deflection Temperature at 1.8 MPa (264 psi) 60.0 °C
140 °F
120°C/h; ISO 75/1
Vicat Softening Point 98.0 °C

@Load 5.001 kg
 208 °F

@Load 11.03 lb
 50°C/h; ISO 306
150 °C

@Load 1.00 kg
 302 °F

@Load 2.21 lb
 50°C/h; ISO 306
Flammability, UL94 V-0

@Thickness 1.60 mm
 V-0

@Thickness 0.0630 in
Glow Wire Test 960 °C

@Thickness 2.00 mm
 1760 °F

@Thickness 0.0787 in
 IEC 695-2-1
Processing Properties Metric English Comments
Melt Temperature 180 - 220 °C
356 - 428 °F
Mold Temperature 20.0 - 50.0 °C
68.0 - 122 °F
Drying Temperature 70.0 - 80.0 °C
158 - 176 °F
Dry Time 2 - 4 hour
2 - 4 hour
in circulation dryer
2 - 4 hour
2 - 4 hour
in desiccant air dryer
Injection Pressure 40.0 - 110 MPa
5800 - 16000 psi
Back Pressure 0.500 - 1.00 MPa
72.5 - 145 psi
Descriptive Properties Value Comments
Holding Pressure () 20-40
% of injection pressure
Injection Speed () Normal
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved