Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled |
Manufacturer | Plastcom spol. s r.o. |
Trade Name | SLOVAMID 66 |
Port | Shanghai port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Plastcom SLOVAMID 66 GF 33 PA66, 33% glass fibre.pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.39 g/cc | 0.0502 lb/in³ | |
Viscosity Measurement | 0.73 - 1.11 | 0.73 - 1.11 | |
Linear Mold Shrinkage | 0.0073 cm/cm | 0.0073 in/in | |
Linear Mold Shrinkage, Transverse | 0.0111 cm/cm | 0.0111 in/in | |
Melt Flow | 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C |
3.0 g/10 min @Load 0.716 lb, Temperature 518 °F |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 200 MPa | 29000 psi | |
Elongation at Break | 2.0 % | 2.0 % | |
Tensile Modulus | 11.0 GPa | 1600 ksi | |
Flexural Strength | 265 MPa | 38400 psi | |
Flexural Modulus | 8.50 GPa | 1230 ksi | |
Charpy Impact Unnotched | 6.00 J/cm² @Temperature -20.0 °C |
28.6 ft-lb/in² @Temperature -4.00 °F |
|
7.00 J/cm² @Temperature 23.0 °C |
33.3 ft-lb/in² @Temperature 73.4 °F |
||
Charpy Impact, Notched | 1.20 J/cm² @Temperature -20.0 °C |
5.71 ft-lb/in² @Temperature -4.00 °F |
|
1.40 J/cm² @Temperature 23.0 °C |
6.66 ft-lb/in² @Temperature 73.4 °F |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 260 °C | 500 °F | |
Deflection Temperature at 1.8 MPa (264 psi) | 250 °C | 482 °F | |
Vicat Softening Point | 250 °C | 482 °F | B |
Flammability, UL94 | HB | HB | |
Glow Wire Test | 650 °C | 1200 °F |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | |
Dielectric Strength | 50.0 kV/mm | 1270 kV/in | |
Comparative Tracking Index | 400 V | 400 V |
Processing Properties | Metric | English | Comments |
---|---|---|---|
Melt Temperature | 280 - 300 °C | 536 - 572 °F | |
Mold Temperature | 60.0 - 90.0 °C | 140 - 194 °F | |
Drying Temperature | 80.0 °C | 176 °F | |
Dry Time | 4 hour | 4 hour | |
Moisture Content | 0.15 % | 0.15 % | |
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi |