- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 3.0 g/10 min
Polymer Property : Melt Flow = 3.0 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
STN EN ISO 1133 |
|
Plastcom SLOVAMID 6 GF 30 LS Polyamide 6, 30% Glass Fiber, UV Stabilization
FeaturesPA 6 for injection moulding, chemically reinforced with 30% glass fiber, stabilized against UV-radiation. Used for the grips of electric tools, hobby tools, gears, covers of electric tools...
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
STN EN ISO 1133 |
|
Plastcom SLOVAMID 66 CF 20 Polyamide 66, 20% Carbon Fiber
FeaturesChemically reinforced with 20% carbon fiber, suitable for mouldings with high strength and toughness also at low temperatures. Used in the automotive, engineering and electrical industry. ..
|
|||
| Melt Flow |
3.0
g/10 min @Load 0.325 kg, Temperature 270 °C |
3.0
g/10 min @Load 0.716 lb, Temperature 518 °F |
|
|
Plastcom SLOVAMID 66 GF 10 FRA 3 PA66, 10% glass fibre
Packaging, transport, stockingThe product is packed in hermetically closed thick-walled 25 kg PE bags, on a 1.000 kg palette coated in a stretch foil, in big bags with a thick PE foil fixed on a 1.0..
|
|||
| Melt Flow |
3.0
-
5.0
g/10 min @Load 5.00 kg, Temperature 190 °C |
3.0
-
5.0
g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
|
Polyplastic Armoflen® PO MF 65-2 Linear Low Density Polyethylene, 65% Calcium Carbonate
Information provided by PolyPlastic Group.
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 190 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
|
Premix Thermoplastics PRE-ELEC® ESD 4300
PRE-ELEC ESD 4300 is a static dissipative thermoplastic compound based on PE-LD. The dissipative property is permanent and built into the polymer chain. PRE-ELEC ESD 4300 has been developed for mult..
|
|||
| Melt Flow |
3.0
g/10 min @Load 3.80 kg, Temperature 230 °C |
3.0
g/10 min @Load 8.38 lb, Temperature 446 °F |
(Cond. I); ASTM D1238 |
|
Ravago Manufacturing Americas Hylac® LG35 Low Gloss ABS
Acrylonitrile Butadiene Styrene, low gloss ABS.Information provided by Ravago.
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
Condition L; ASTM D1238 |
|
PolyMirae Moplen HP524J BDDP Film Grade Polypropylene
Moplen HP524J is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP524J is a homopolymer particularly suitable for BOPP (Tender) fil..
|
|||
| Melt Flow |
3.0
g/10 min @Load 1.20 kg, Temperature 300 °C |
3.0
g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
|
SABIC Innovative Plastics Lexan® HPH4504H PPC (Asia Pacific)
High heat specialty polycarbonate with enhanced autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 of USP Class VI). EtO, ..
|
|||
| Melt Flow |
3.0
g/10 min @Load 5.00 kg, Temperature 200 °C |
3.0
g/10 min @Load 11.0 lb, Temperature 392 °F |
cm³/10 min |
|
Polimeri Europa EDISTIR N1460 Polystyrene
(discontinued **)
Symbol according to ISO 1043-1: PS Designation: Thermoplastic ISO 1622-PS,E,085-03 High molecular weight general purpose polystyrene with good mechanical strength. This grade is especially recomme..
|
|||
| Melt Flow |
3.0
-
5.0
g/10 min @Load 2.16 kg, Temperature 343 °C |
3.0
-
5.0
g/10 min @Load 4.76 lb, Temperature 649 °F |
ASTM D1238 |
|
Solvay Specialty Polymers Udel® P-3500 LCD Polysulfone (PSU)
(Unverified Data**)
Udel P-3500 LCD is a very high molecular weight grade of polysulfone, and therefore offers the greatest toughness and chemical resistance of the available grades. It is well-suited for extrusion. Th..
|
|||
| Melt Flow |
3.0
g/10 min @Load 5.00 kg, Temperature 200 °C |
3.0
g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
|
LG Chemical 65IH HIPS
High impact, Extrusion, Balanced mechanical properties, Good surface appearance with high gloss, Conforming to FDA CFR 177.1640, Excellent processability, Applications include refrigerator food tray..
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
|
Inno-Comp INNOPOL® CS 1-5820 20% Glass-Fiber-Filled Polypropylene Homopolymer
INNOPOL® CS 1-5820 is a 20% glass-fiber-filled polypropylene homopolymer compound. This grade is available in natural and custom colored form.INNOPOL® CS 1-5820 is recommended for producing in..
|
|||
| Melt Flow | 3.0 g/10 min | 3.0 g/10 min | ISO 1133 |
|
Lucite International Diakon® CMG314V Acrylic Polymer
Information provided by Lucite International
|
|||
| Melt Flow |
3.0
g/10 min @Load 5.00 kg, Temperature 200 °C |
3.0
g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D 1238 |
|
Styrolution PS 5400/5401 HIPS
Good ESCRHigh ImpactLow gloss (matte finish)USP Class VI certifiedUL Classification 94 HBInformation provided by Styrolution
|
|||
| Melt Flow |
3.0
-
4.0
g/10 min @Load 5.00 kg, Temperature 200 °C |
3.0
-
4.0
g/10 min @Load 11.0 lb, Temperature 392 °F |
Granulate; ISO 1133/H |
|
SYNTHOS Krasten® 662E High Impact Polystyrene
High impact grade with properties suitable for thermoforming. Processed mainly by extrusion and thermoforming. Production of demanding visual appearance plates, technical parts, sheets and molded pa..
|
|||
| Melt Flow | 3.0 - 7.0 g/10 min | 3.0 - 7.0 g/10 min | Cond L; ASTM D1238 |
|
Washington Penn PPH2TF-2B Polypropylene, 20% Talc Filled
Injection Molding Grade. Heat Stabilized. Meets Ford ESH-M4D293-B Spec.Applications: AC Blower wheels, parts and appliances.Data provided by Washington Penn Plastic Co., Inc.
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 190 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
|
Westlake EF4060 Low Density Polyethylene
Westlake Polyethylene EF4060 is a low density formulation suggested for cast film applications that require good clarity and heat sealability. Common applications include bread bags, fresh produce b..
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
|
Total PPH 4054 Polypropylene Homopolymer
Polypropylene PPH 4054 is a homopolymer polypropylene with a Melt Flow index of 3 g/10 min.Polypropylene PPH 4054 has been designed for the production of BOPP film with the tenter frame process. Th..
|
|||
| Melt Flow |
3.0
g/10 min @Load 1.20 kg, Temperature 300 °C |
3.0
g/10 min @Load 2.65 lb, Temperature 572 °F |
|
|
Covestro Makrolon® 8325 Polycarbonate
High viscosity injection molding and extrusion grade with 20% standard glass fibers and easy mold release, high strength and stiffness.Information provided by Bayer.As of 1 September 2015, Bayer Mat..
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 190 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
|
ExxonMobil LDPE LD 151HR Low Density Polyethylene Resin
Product Description: LD 151 series LDPE grades offer an excellent combination of high clarity with high stiffness. Several additive packages are available according to the required surface propertie..
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
|
Eurostar Starpylen HU 70E4 ECR
Starpylen HU 70E4 ECR is a Renewable Calcium Carbonate (oyster shell) Masterbatch in a PP carrier. Engineered to reduce carbon footprint in mineral filled compound.Information provided by Eurostar.
|
|||
| Melt Flow |
3.0
g/10 min @Load 2.16 kg, Temperature 230 °C |
3.0
g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
|
Dow INSPIRE™ 404 Performance Polymer
INSPIRE 404 Performance Polymer is a propylene-based resin intended for use in thermoforming applications where exceptional stiffness, clarity and heat resistance is desired. The high stiffness of t..
|
|||
| Melt Flow | 3.0 g/10 min | 3.0 g/10 min | ISO 1133 |
|
Addiplast Addilene H 210 G20 Polypropylene Homopolymer
Glass bead reinforced, improved stiffness and dimensional stabilityInformation provided by Addiplast.
|
|||
| Melt Flow |
3.0
g/10 min @Load 5.00 kg, Temperature 260 °C |
3.0
g/10 min @Load 11.0 lb, Temperature 500 °F |
|
|
Ineos ABS TRIAX® 1408 GF ABS/Nylon Blend, Injection Grade, Dry as Molded
(discontinued **)
Injection molding grade, higher stiffness, good stress corrosion cracking resistance and chemical resistance (fuel, cleaning agents).Information provided by Bayer.LANXESS was spun-off from Bayer in ..
|
|||
Copyright © lookpolymers.com All Rights Reserved