- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethersulfone (PES)
- Solvay Specialty Polymers Veradel® 3250 Polyethersulfone (PESU)
Solvay Specialty Polymers Veradel® 3250 Polyethersulfone (PESU)
| Category | Polymer , Thermoplastic , Polyethersulfone (PES) |
| Manufacturer | Solvay Specialty Polymers |
| Trade Name | Veradel® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Veradel® 3250 Polyethersulfone (PESU).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Veradel® 3250 polyethersulfone (PESU) has a slightly higher melt flow rate than Veradel® 3200. This transparent resin offers a high heat deflection temperature, excellent toughness and dimensional stability, and resistance to steam, boiling water and mineral acids. Features: Acid Resistant; Flame Retardant; Food Contact Acceptable; General Purpose; Good Adhesion; Good Chemical Resistance; Good Creep Resistance; Good Dimensional Stability; Good Thermal Stability; Good Toughness; High Heat Resistance; High Tensile Strength; Hydrolysis Resistant; Medium Flow; Medium Molecular Weight; Medium RigidityUses: Adhesives; Coating Applications; Compounding; FilmAdditional Properties: Water Absorption - ASTM D570 1.9 %Information provided by Solvay Specialty Polymers.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.37 g/cc | 0.0495 lb/in³ | ASTM D792 |
| Water Absorption | 0.50 % @Time 86400 sec |
0.50 % @Time 24.0 hour |
ISO 62 |
| Linear Mold Shrinkage, Flow | 0.0060 cm/cm | 0.0060 in/in | |
| Melt Flow | 25 g/10 min @Load 2.16 kg, Temperature 380 °C |
25 g/10 min @Load 4.76 lb, Temperature 716 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | 88.9 MPa | 12900 psi | ASTM D638 |
| Elongation at Yield | 6.5 % | 6.5 % | ASTM D638 |
| Tensile Modulus | 2.69 GPa | 390 ksi | ASTM D638 |
| Flexural Strength | 125 MPa | 18100 psi | ASTM D790 |
| Flexural Modulus | 2.62 GPa | 380 ksi | ASTM D790 |
| Izod Impact, Notched | 0.530 J/cm | 0.993 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 52.0 µm/m-°C | 28.9 µin/in-°F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 200 °C | 392 °F | Annealed; ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm |
V-0 @Thickness 0.0591 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.70e+15 ohm-cm | 1.70e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.5 @Frequency 1000 Hz |
3.5 @Frequency 1000 Hz |
ASTM D150 |
| 3.51 @Frequency 60.0 Hz |
3.51 @Frequency 60.0 Hz |
ASTM D150 | |
| 3.54 @Frequency 1.00e+6 Hz |
3.54 @Frequency 1.00e+6 Hz |
ASTM D150 | |
| Dielectric Strength | 15.0 kV/mm | 381 kV/in | ASTM D149 |
| Dissipation Factor | 0.0017 @Frequency 60.0 Hz |
0.0017 @Frequency 60.0 Hz |
ASTM D150 |
| 0.0022 @Frequency 1000 Hz |
0.0022 @Frequency 1000 Hz |
ASTM D150 | |
| 0.0056 @Frequency 1.00e+6 Hz |
0.0056 @Frequency 1.00e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| FDA | Yes | Yes |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Zone 1 | 335 - 391 °C | 635 - 736 °F | |
| Zone 2 | 335 - 391 °C | 635 - 736 °F | |
| Zone 3 | 335 - 391 °C | 635 - 736 °F | |
| Zone 4 | 335 - 391 °C | 635 - 736 °F | |
| Zone 5 | 335 - 391 °C | 635 - 736 °F | |
| Adapter Temperature | 327 - 371 °C | 621 - 700 °F | |
| Melt Temperature | 343 - 385 °C | 649 - 725 °F | |
| Mold Temperature | 149 - 163 °C | 300 - 325 °F | |
| Die Cooling Temperature | 327 - 371 °C | 621 - 700 °F | |
| Drying Temperature | 177 °C | 351 °F | |
| 177 °C @Time 9000 sec |
351 °F @Time 2.50 hour |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| Latin America | ||
| North America | ||
| Color | Transparent - Slight Yellow | |
| Form | Powder | |
| Injection Rate | Fast | |
| Processing Technique | Compounding; Extrusion; Injection Molding | |
| Screw Compression Ratio | 2.0:1.0 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved