Polymer Property : Injection Pressure = 10200 psi Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Processing Properties	Metric	English
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom PLASTAMID® 6 BT N 26 B/IM PA6 Basic type PA 6 for injection molding, for general use. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners, clamps, hobby tools. Delivered in the natu..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom PLASTAMID® 66 BT B 27 TS PA66 heat stabilized Basic type PA66 for injection molding, heat stabilized, modified for general use, with excellent manufacturing properties. Use: automotive, engineering, electrical and consumer-goods industry - elec..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom PLASTAMID® 66 BT N 27 B PA66 PA66 for compounding, modified for general use, with excellent manufacturing properties. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners, clamps, h..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PC 71 T 20 PP, 20% mineral filling FeaturesModified copolymer PP for injection moulding with the content of 20% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shrin..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PC 81 T 20 PP, 20% mineral filling FeaturesModified copolymer PP for injection moulding with the content of 20% microground, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitu..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PC 81 T 30 PP, 30% mineral filling FeaturesModified copolymer PP for injection moulding with the content of 30% microground, floated, chemically modified talc. General application - packing material, garden flower-pots, toys, furnitu..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PH 69 GF 40 Polypropylene Homopolymer, 40% Glass Fiber FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 40% glass fiber, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PH 71 T 20 PP, 20% mineral filling FeaturesModified homopolymer PP for injection moulding with the content of 20% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shr..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PQ 81 T 30 PP, 30% mineral filling FeaturesModified PP for injection moulding with the content of 30% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shrinkage. Gene..
Injection Pressure	70.0 - 100 MPa	10200 - 14500 psi
Plastcom SLOVAMID 6 FRB 4 LS Polyamide 6, Halogen Free Flame Retardant, Light Stabilization FeaturesPA 6 for injection moulding with increased flammability resistance with non-halogen flame retardant. Determined for electrical purposes. Excellent flow of the material predetermines it for..
Injection Pressure	70.0 - 100 MPa	10200 - 14500 psi
Plastcom SLOVAMID 6 FRC 2 LS Polyamide 6, Halogen Free Flame Retardant, Light Stabilization FeaturesLongterm external use is possible because of the material stabilization with the light stabilizers on the HALS basis. Meets the flammability in accordance with the norm DIN 4102 - B1. PA 6..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 6 GF 15 T 25 LTS PA6, 15% glass fibre, 25% mineral filling FeaturesGood anisotropy of the manufacturing shrinkage. The talc is added to get the material shrinkage identical in both directions. Application for flat products in disc form /no screw after cooli..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 6 GF 30 HTS PA6, 30% glass fibre, thermal stability FeaturesPA 6 for injection moulding, chemically reinforced with 30% glass fibre, heat stabilized, mouldings resistant against longtime heat impact up to 170°C, resistive against hydrolysis. Used in..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 GF 20 PA66, 20% glass fibre FeaturesChemically reinforced with 20 % glass fibre, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and electrical industry. ..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 GF 20 TS PA66, 20% glass fibre, thermal stability FeaturesPA 66 for injection moulding, chemically reinforced with 20 % glass fibre, heat stabilized, suitable for high strength and high impacted mouldings. Used in automotive, engineering and electr..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 GF 25 FRG 5 Polyamide 66, 25% Glass Fiber, Halogen Free Flame Retardant FeaturesPA 66 for injection moulding, chemical reinforced with 25% glass fiber and non-halogen flame retardant, with heat and flammability resistance, achieves V-0 in accordance with UL 94. Non-hal..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 GF 25 FRI 3 Polyamide 66, 25% Glass Fiber, Halogen Free Flame Retardant FeaturesPA 66 for injection moulding, chemically reinforced with 25% glass fiber and non-halogen flame retardant, with heat and flammability resistance, achieves V-0 in accordance with UL 94. Non-h..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 GF 30 FRA 5 Polyamide 66, 30% Glass Fiber, Halogen Flame Retardant FeaturesPA 66 for injection moulding, reinforced with 30% glass fiber and halogen flame retardant. Application in electrical industry: breakers, coil forms, covers, terminals. Slightly decreased f..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 GF 30 TS PA 66 reinforced with 30% glass, thermal stability Features: PA 66 for injection moulding, chemically reinforced with 30 % glass fibre, heat stabilized, suitable for high strength and high impacted mouldings. Used in automotive, engineering and elec..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 GF 35 FRG 5 Polyamide 66, 35% Glass Fiber, Halogen Free Flame Retardant FeaturesPA 66 for injection moulding, chemical reinforced with 35% glass fiber and non-halogen flame retardant, with heat and flammability resistance, achieves V-0 in accordance with UL 94. Non-hal..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 GF 45 PA66, 45% glass fibre FeaturesChemically reinforced with 45% glass fibre, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and electrical industry. W..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 LI TS PA66, improved strength FeaturesModified with thermoplastic reactive caoutchouc, determined for mouldings with high toughness also at minus temperatures. Eligible application for ski-shoes, helmets for sport and other safe..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 66 Y 35 FRY 7 PA66, 35% mineral filling FeaturesPA 66 for injection moulding, chemically reinforced with 35 % mineral filler and non-halogen flame retardant, with heat resistance and nonflammability, achieves V 0 /3.2 mm/ in accordance wi..
Injection Pressure	70.0 - 100 MPa	10200 - 14500 psi
Plastcom SLOVAMID® 6 GF 25 FRC 4 PA6 reinforced with glass fiber, flame retarded PA 6 for injection molding, reinforced with 25 % glass fiber, flame retarded with halogen free flame retardant. Main features: flammability according to UL 94 3 at 1,6mm, glow wire at 960°C. Applic..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PH 49 GF 20 Polypropylene Homopolymer, 20% Glass Fiber FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 20% glass fiber, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PH 59 T 40 LW 031 PP, 40% mineral filling, laser label FeaturesModified homopolymer PP for injection moulding with the content of 40% microground, floated, chemically modified talc.Contains modificator for laser labeling of finisched parts. /LASER NdIAG..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 6 GF 10 FRG 5 Polyamide 6, 10% Glass Fiber, Flame Retardant FeaturesPA 6 for injection moulding, chemically strengthened with 10% glass fiber. Application: impacted mouldings with high strength applied in automotive, electrical, engineering and consumer-goo..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 6 GF 5 PA6, 5% glass fibre FeaturesPA 6 for injection moulding, chemically strengthened with 5% glass fibre. Application: impacted mouldings and mouldings with high strength applied in automotive, electrical, engineering and ..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVAMID 6 NG GF 20 HLS PA6, 20% glass fibre, combined stability FeaturesPA 6 for injection moulding, chemically reinforced with 20% glass fibre, heat stabilized and weather stabilized. Stabilized against hydrolysis. Good surface finisch.Packaging, transport, sto..
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi
Plastcom SLOVALEN PC 92 T 40 PP, 40% mineral filling FeaturesModified homopolymer and copolymer PP for injection moulding with the contenct of 40% microground, chemically modified talc. Increased strength, rigidity and thermal application up to 100°C..