Processing Properties | Metric | English | Comments |
---|---|---|---|
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom PLASTAMID® 6 GF 30 031 TS PA6 reinforced with glass fiber, heat stabilized PA 6 for injection molding, reinforced with 30% glass fiber, heat stabilized, better surface appearance of injection moldings. Decrease in tensile strength by 50 % after 5000 hours at 170°C. Used f.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom PLASTAMID® 66 BT B 27 A PA66 PA66 for compounding, modified for general use, with excellent manufacturing properties. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners, clamps, h.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom PLASTAMID® 66 BT N 27 B PA66 PA66 for compounding, modified for general use, with excellent manufacturing properties. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners, clamps, h.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PC 51 C 40 PP reinforced with 40% mineral filler Features: Modified homopolymer and copolymer PP for injection moulding with the contenct of 40% microground, chemically modified chalk. Increased strength, rigidity and thermal application up to 100.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PC 51 T 20 Polypropylene Copolymer, 20% Micronized Talc FeaturesModified copolymer PP for injection moulding with the content of 20% micronized, floated, chemically modified talc. General application in all industry branches - packing material, garden f.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PC 71 T 15 PP, 15% mineral filling FeaturesModified PP for injection moulding with the content of 15% mineral filling. Increased rigidity, strength and thermal. Decreased shrinkage. General application in all industry branches - pack.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PC 73 T 15-1M PP, 15% mineral filling, UV stable FeaturesModified PP copolymer for injection moulding with the content of 15 % mineral filler, uv stabilized, good scratch resistance, low odor and very good flowability with good dimensional stabili.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PH 51 T 40 Polypropylene Homopolymer, 40% Micronized Talc FeaturesModified homopolymer PP for injection moulding with the content of 40% micronized, floated, chemically modified talc. General application in all industry branches - packing material, garden.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PH 66 GF 20 FRO 4 PP, 20% glass fibre, flame retardant FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 20% glass fibre, with decreased flammability. Used in the electrical industry - teroderately increased toughness an.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 6 BT HV TLS PA6, light and thermal stability FeaturesPA 6 for injection moulding and extrusion with the content of UV and TS stabilizer predetermins products for external use. Delivered in natural mode and in the full RAL colour scale.Packagin.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 6 GB 30 PA6, 30% glass beads FeaturesNearly ideal anisotropy of shrinkage in the vertical and in the horizontal direction is established. Manufacturing of exact mouldings. Disadvantage are the relatively low mechanical properti.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 6 GF 25 FRC 3 PA6, 25% glass fibre, flame retardant FeaturesPA 6 for injection moulding, chemically strengthened with 25 % glass fibre. Application: impacted mouldings and mouldings with high strength applied in automotive, electrical, engineering an.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 6 GF 33 PA6, 33% glass fibre FeaturesPA 6 for injection moulding, chemically strengthened with 33% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 6 GF 45 Polyamide 6, 45% Glass Fiber FeaturesPA 6 for injection moulding, chemically strengthened with 45% of glass fiber, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 6 OB Polyamide 6, Optically Brightened FeaturesPA 6 for injection moulding, optical brightened, for mouldings with high surface brightness, with increased toughness and tensile modulus in comparison with the basic type. The microcrystal.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 66 GB 30 GF 20 PA66, 20% glass fibre, 30% glass beads FeaturesPA 66 chemically reinforced with 20% glass fibre and with the content of 30 % glass beads. Improved anisotropy of shrinkage. The relation of the anisotropy to the mechanical properties can b.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 66 GF 25 FRA 5 PA66, 25% glass fibre, flame retardant FeaturesPA 66 for injection moulding, reinforced with 25% glass fibre and halogen flame retardant. Application in electrical industry: breakers, coilforms, covers, terminals. Slightly decreased flam.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 66 GF 25 TS PA66, 25% glass fibre, thermal stability FeaturesPA 66 for injection moulding, chemically reinforced with 25 % glass fibre, heat stabilized, suitable for high strength and high impacted mouldings. Used in automotive, engineering and electr.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 66 GF 30 FRG 5 PA66, 30% glass fibre, flame retarder FeaturesPA 66 for injection moulding, chemically reinforced with 30 % glass fibre and non-halogen flame retardant, with heat resistance and nonflammability, achieves V 0 /0,8 mm/ in accordance with .. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 66 LI TS PA66, improved strength FeaturesModified with thermoplastic reactive caoutchouc, determined for mouldings with high toughness also at minus temperatures. Eligible application for ski-shoes, helmets for sport and other safe.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 66 SHI PA66, improved strength Packaging, transport, stockingThe product is packed in hermetically closed thick-walled 25 kg PE bags, on a 1.000 kg palette coated in a stretch foil, in big bags with a thick PE foil fixed on a 1.0.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 66 T 30 Polyamide 66, 30% Mineral Filled FeaturesPA 66 with the content of 30% chemically modified mineral filler. Used for holders of electric hand tools, hobby tools, gears, covers of electric tools, flat products, automobile wheel cove.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 66/6 GF 20 PA66/6, 20% glass fibre FeaturesChemically reinforced alloy PA 66 and PA 6 with 20 % glass fibre, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and .. |
|||
Injection Pressure | 70.0 - 100 MPa | 10200 - 14500 psi | |
Nilit Nilamid A3 H5 G6 30% Glass Reinforced PA66 Description: Nilamid A3 H5 G6 has an outstanding mechanical performance and is 30% glass fiber reinforced. It is stabilized against chemical attack from peroxides and other oxidizing substances. It .. |
|||
Injection Pressure | 70.0 - 100 MPa | 10200 - 14500 psi | |
Nilit Nilamid B3N Unfilled, Nucleated PA6 Description: Nilamid B3N is an unfilled, nucleated NYLON 6. It is fast cycling, and combines ease of processing with good overall mechanical characteristics.Key characteristics: Fast cyclingEasy pro.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PH 59 T 40 LW 031 PP, 40% mineral filling, laser label FeaturesModified homopolymer PP for injection moulding with the content of 40% microground, floated, chemically modified talc.Contains modificator for laser labeling of finisched parts. /LASER NdIAG.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PH 66 GF 30 FRO 4 PP, 30% glass fibre, mod. of mech. prop. Packaging, transport, stockingThe product is packed in hermetically closed thick-walled 25 kg PE bags, on a 1.000 kg palette coated in a stretch foil, in big bags with a thick PE foil fixed on a 1.0.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVAMID 6 T 30 TS PA6, 30% mineral filling FeaturesDecreased shrinkage against the BT types, increased heat application. Increased modulus in tension - strength of the material. PA matrix reduction. PA for injection moulding with the content.. |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
BLUESTAR PBT 403M-G20 20% Glass Filled PBT, injection molding grade, 20% glass fiber reinforced, flame retardant, exceptional flowability and processability, colorable.Information provided by Polymer Technology and Services, LLC (PTS). |
|||
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi | |
Plastcom SLOVALEN PH 73 T 20 PP, 20% mineral filling FeaturesModified homopolymer PP for injection moulding with the content of 20% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc conte nt. Decreased sh.. |