Plastcom SLOVAMID 66 GB 30 LS PA66, 30% glass beads, light stability

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Glass Bead Filled
Manufacturer	Plastcom spol. s r.o.
Trade Name	SLOVAMID 66
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plastcom SLOVAMID 66 GB 30 LS PA66, 30% glass beads, light stability.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Packaging, transport, stockingThe product is packed in hermetically closed thick-walled 25 kg PE bags, on a 1.000 kg palette coated in a stretch foil, in big bags with a thick PE foil fixed on a 1.000 kg palette, in paper octabins with a thick PE foil fixed on a 1.000 kg palette or in other packaging according to customer requirements. The transport is provided in closed-up vehicles where the material is protected against movement and mechanical damage. The product requires stocking in closed-up, dry places protected against sun and thermal radiation.Information Provided by Plastcom spol. s r.o.

Physical Properties	Metric	English
Density	1.36 g/cc	0.0491 lb/in³
Viscosity Measurement	0.63 - 0.71	0.63 - 0.71
Linear Mold Shrinkage	0.0063 cm/cm	0.0063 in/in
Linear Mold Shrinkage, Transverse	0.0071 cm/cm	0.0071 in/in
Melt Flow	3.0 g/10 min @Load 0.325 kg, Temperature 270 °C	3.0 g/10 min @Load 0.716 lb, Temperature 518 °F

Mechanical Properties	Metric	English
Tensile Strength at Break	85.0 MPa	12300 psi
Elongation at Break	8.0 %	8.0 %
Tensile Modulus	4.70 GPa	682 ksi
Flexural Strength	180 MPa	26100 psi
Flexural Modulus	4.55 GPa	660 ksi
Charpy Impact Unnotched	3.20 J/cm² @Temperature -20.0 °C	15.2 ft-lb/in² @Temperature -4.00 °F
	3.60 J/cm² @Temperature 23.0 °C	17.1 ft-lb/in² @Temperature 73.4 °F
Charpy Impact, Notched	0.800 J/cm² @Temperature -20.0 °C	3.81 ft-lb/in² @Temperature -4.00 °F
	0.900 J/cm² @Temperature 23.0 °C	4.28 ft-lb/in² @Temperature 73.4 °F

Thermal Properties	Metric	English	Comments
Melting Point	260 °C	500 °F
Deflection Temperature at 1.8 MPa (264 psi)	250 °C	482 °F
Vicat Softening Point	250 °C	482 °F	B
Flammability, UL94	HB	HB
Glow Wire Test	650 °C	1200 °F

Electrical Properties	Metric	English
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Dielectric Strength	40.0 kV/mm	1020 kV/in
Comparative Tracking Index	400 V	400 V

Processing Properties	Metric	English
Melt Temperature	280 - 300 °C	536 - 572 °F
Mold Temperature	60.0 - 90.0 °C	140 - 194 °F
Drying Temperature	80.0 °C	176 °F
Dry Time	4 hour	4 hour
Moisture Content	0.15 %	0.15 %
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi

Users viewing this material also viewed the following: