Plastcom PLASTAMID® 66 BT B 27 TS PA66 heat stabilized

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Heat Stabilized
Manufacturer	Plastcom spol. s r.o.
Trade Name	PLASTAMID®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plastcom PLASTAMID® 66 BT B 27 TS PA66 heat stabilized.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Basic type PA66 for injection molding, heat stabilized, modified for general use, with excellent manufacturing properties. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners, clamps, hobby tools, toys. Delivered in the black mode.Information Provided by Plastcom spol. s r.o.

Physical Properties	Metric	English	Comments
Density	1.14 g/cc	0.0412 lb/in³	STN EN ISO 1183-1
Linear Mold Shrinkage	0.018 cm/cm	0.018 in/in	STN EN ISO 294-4
Linear Mold Shrinkage, Transverse	0.019 cm/cm	0.019 in/in	STN EN ISO 294-4
Melt Flow	5.0 g/10 min @Load 0.325 kg, Temperature 275 °C	5.0 g/10 min @Load 0.716 lb, Temperature 527 °F	STN EN ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	85.0 MPa	12300 psi	STN EN ISO 527-2
Elongation at Break	3.5 %	3.5 %	STN EN ISO 527-2
Tensile Modulus	3.50 GPa	508 ksi	STN EN ISO 527-2
Flexural Strength	95.0 MPa	13800 psi	STN EN ISO 178
Flexural Modulus	2.90 GPa	421 ksi	STN EN ISO 178
Charpy Impact Unnotched	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	STN EN ISO 179
	NB @Temperature -20.0 °C	NB @Temperature -4.00 °F	STN EN ISO 179
Charpy Impact, Notched	0.350 J/cm² @Temperature 23.0 °C	1.67 ft-lb/in² @Temperature 73.4 °F	STN EN ISO 179
	0.350 J/cm² @Temperature -20.0 °C	1.67 ft-lb/in² @Temperature -4.00 °F	STN EN ISO 179

Thermal Properties	Metric	English	Comments
Melting Point	260 °C	500 °F	STN EN 11357-1
Deflection Temperature at 1.8 MPa (264 psi)	70.0 °C	158 °F	STN EN ISO 75-2 (A)
Vicat Softening Point	250 °C	482 °F	STN EN ISO 306
Flammability, UL94	V-2 @Thickness 3.20 mm	V-2 @Thickness 0.126 in
Glow Wire Test	960 °C @Thickness 3.00 mm	1760 °F @Thickness 0.118 in	STN EN 60695-2-12

Processing Properties	Metric	English	Comments
Melt Temperature	240 - 260 °C	464 - 500 °F
Mold Temperature	60.0 - 80.0 °C	140 - 176 °F
Drying Temperature	80.0 °C @Time 14400 sec	176 °F @Time 4.00 hour
Moisture Content	0.25 %	0.25 %	STN EN ISO 3344
Injection Pressure	70.0 - 120 MPa	10200 - 17400 psi

Descriptive Properties	Value	Comments
Color	Black

Users viewing this material also viewed the following: