Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LG Chemical LUMID HI1202B(W) PA66, High Impact

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Impact Grade
Manufacturer LG Chemical
Trade Name LUMID
Port Shanghai port,China
Trade Terms EXW, FOB, CFR, CIF
Payment Terms L/C, T/T, PayPal
Download PDF LG Chemical LUMID HI1202B(W) PA66, High Impact.pdf
Price EMAIL US    sales@lookpolymers.com
Material Notes:
Feature: Injection Molding, PA66, High ImpactApplication: Automotive (Covers)CAS No. 32131-17-2 and 9010-79-1Information provided by LG Chemical
Physical Properties Metric English Comments
Specific Gravity 1.07 g/cc
1.07 g/cc
ASTM D792
Water Absorption 1.1 %
1.1 %
ASTM D570
Maximum Moisture Content 0.10
0.10
Injection Molding
Linear Mold Shrinkage, Flow 0.014 - 0.018 cm/cm
<br>@Thickness 3.20 mm
 0.014 - 0.018 in/in
<br>@Thickness 0.126 in
 ASTM D955
Mechanical Properties Metric English Comments
Hardness, Rockwell R 110
110
ASTM D785
Tensile Strength, Yield 52.0 MPa
<br>@Thickness 3.20 mm
 7540 psi
<br>@Thickness 0.126 in
 50mm/min; ASTM D638
Elongation at Break 60 %
<br>@Thickness 3.20 mm
 60 %
<br>@Thickness 0.126 in
 50mm/min; ASTM D638
Flexural Yield Strength 68.6 MPa
<br>@Thickness 3.20 mm
 9960 psi
<br>@Thickness 0.126 in
 2.8mm/min; ASTM D790
Flexural Modulus 1.86 GPa
<br>@Thickness 3.20 mm
 270 ksi
<br>@Thickness 0.126 in
 2.8mm/min; ASTM D790
Izod Impact, Notched 8.14 J/cm
<br>@Thickness 6.40 mm,<br> Temperature 23.0 °C
 15.2 ft-lb/in
<br>@Thickness 0.252 in,<br> Temperature 73.4 °F
 ASTM D256
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 70.0 µm/m-°C
38.9 µin/in-°F
ASTM D696
Melting Point 260 °C
500 °F
ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi) 200 °C
<br>@Thickness 6.40 mm
 392 °F
<br>@Thickness 0.252 in
 Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 65.0 °C
<br>@Thickness 6.40 mm
 149 °F
<br>@Thickness 0.252 in
 Unannealed; ASTM D648
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+14 ohm-cm
1.00e+14 ohm-cm
ASTM D257
Dielectric Constant 3.0
<br>@Frequency 1.00e+6 Hz
 3.0
<br>@Frequency 1.00e+6 Hz
 ASTM D150
Dielectric Strength 24.0 kV/mm
<br>@Thickness 1.00 mm
 610 kV/in
<br>@Thickness 0.0394 in
 ASTM D149
Processing Properties Metric English Comments
Rear Barrel Temperature 260 - 275 °C
500 - 527 °F
Injection Molding
Middle Barrel Temperature 265 - 275 °C
509 - 527 °F
Injection Molding
Front Barrel Temperature 270 - 280 °C
518 - 536 °F
Injection Molding
Nozzle Temperature 270 - 280 °C
518 - 536 °F
Injection Molding
Melt Temperature 270 - 280 °C
518 - 536 °F
Injection Molding
Mold Temperature 60.0 - 90.0 °C
140 - 194 °F
Injection Molding
Drying Temperature 80.0 - 100 °C
176 - 212 °F
Injection Molding
Dry Time 4.00 - 5.00 hour
4.00 - 5.00 hour
Injection Molding
Back Pressure 29.4 - 58.8 MPa
4260 - 8530 psi
Injection Molding
Screw Speed 30 - 60 rpm
30 - 60 rpm
Injection Molding
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved