Teknor Apex FlexalloyÂ® 9100-65 Polyvinyl Chloride Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Vinyl (PVC)
Manufacturer	Teknor Apex Company
Trade Name	Flexalloy®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Teknor Apex FlexalloyÂ® 9100-65 Polyvinyl Chloride Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Good Flexibility, General Purpose, Ultra High MW, Recyclable, Good Thermal Stability, Good Weather ResistanceUses- Footwear, Tubing, Gaskets, Weatherstripping, hose, Wheels, SealsForms-PelletsProcessing-Extrusion, Injection MoldingInformation provided by Teknor Apex Company

Physical Properties	Metric	English	Comments
Specific Gravity	1.15 g/cc	1.15 g/cc	23Â°C; ASTM D792
Linear Mold Shrinkage	0.010 - 0.025 cm/cm	0.010 - 0.025 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	65	65	15 seconds; ASTM D2240
Tensile Strength, Yield	5.24 MPa	760 psi	100%; ASTM D412
	14.5 MPa	2100 psi	ASTM D412
Elongation at Break	370 %	370 %	ASTM D412
Tear Strength	36.8 kN/m	210 pli	Die C; ASTM D624
Compression Set	23 %	23 %	73Â°F; ASTM D395
	55 %	55 %	158Â°F, 22 hr.; ASTM D395

Thermal Properties	Metric	English	Comments
Brittleness Temperature	-50.0 Â°C	-58.0 Â°F	ASTM D746

Processing Properties	Metric	English
Rear Barrel Temperature	177 - 193 Â°C	350 - 380 Â°F
Middle Barrel Temperature	177 - 193 Â°C	350 - 380 Â°F
Front Barrel Temperature	177 - 193 Â°C	350 - 380 Â°F
Mold Temperature	23.9 - 51.7 Â°C	75.0 - 125 Â°F
Back Pressure	0.345 - 1.03 MPa	50.0 - 150 psi

Descriptive Properties	Value	Comments
Screw Compression Ratio	2:1-3:1
Screw L/D Ratio	20:1- 24:1
Suggested Max Regrind, %	20

Users viewing this material also viewed the following: