- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, 40% Mineral Filled
- BASF Ultramid® 8260 HS PA6 (Dry)
BASF Ultramid® 8260 HS PA6 (Dry)
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 40% Mineral Filled |
| Manufacturer | BASF |
| Trade Name | Ultramid® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | BASF Ultramid® 8260 HS PA6 (Dry).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.291 g/cc | 0.04664 lb/in³ | Melt; ISO 1183 |
| 1.49 g/cc | 0.0538 lb/in³ | ISO 1183 | |
| Water Absorption | 5.7 % | 5.7 % | ISO 62 |
| Moisture Absorption at Equilibrium | 1.6 % | 1.6 % | 23°C/50% R.H.; ISO 62 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 85.0 MPa | 12300 psi | 5mm/min; ISO 527 |
| Elongation at Break | 10 % | 10 % | 5mm/min; ISO 527 |
| Tensile Modulus | 6.40 GPa | 928 ksi | 1mm/min; ISO 527 |
| Charpy Impact Unnotched | 11.5 J/cm² | 54.7 ft-lb/in² | ISO 179 |
| Charpy Impact, Notched | 0.300 J/cm² | 1.43 ft-lb/in² | ISO 179 |
| 0.300 J/cm² @Temperature -30.0 °C |
1.43 ft-lb/in² @Temperature -22.0 °F |
ISO 179 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 46.0 µm/m-°C | 25.6 µin/in-°F | ISO 11359 |
| CTE, linear, Transverse to Flow | 58.0 µm/m-°C | 32.2 µin/in-°F | ISO 11359 |
| Specific Heat Capacity | 1.999 J/g-°C | 0.4778 BTU/lb-°F | Melt |
| Thermal Conductivity | 0.281 W/m-K | 1.95 BTU-in/hr-ft²-°F | Melt |
| Melting Point | 220 °C | 428 °F | 10 K/min |
| Deflection Temperature at 0.46 MPa (66 psi) | 195 °C | 383 °F | ISO 75 |
| Flammability, UL94 | HB | HB | |
| HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+13 ohm-cm | >= 1.00e+13 ohm-cm | IEC 60093 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 275 °C | 527 °F | Injection molding |
| Mold Temperature | 95.0 °C | 203 °F | Injection molding |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Form | Pellets | |
| Processing | Injection Molding | |
| Special characteristic | Heat stabilized or stable to heat | |
| X |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved