Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Mold Temperature = 50.0 °F Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Mold Temperature 10.0 - 30.0 °C
50.0 - 86.0 °F
Multibase TPSiV™ 3010-60A Thermoplastic Silicone Vulcanizate
These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced..
Mold Temperature 10.0 - 30.0 °C
50.0 - 86.0 °F
Multibase TPSiV™ 3011-85A Thermoplastic Silicone Vulcanizate
These materials are a novel family of TPV products based on cross-linked silicone rubber dispersed into various engineering thermoplastics. The dispersion of the silicone internal phase is produced..
Mold Temperature 10.0 - 48.9 °C
50.0 - 120 °F
RTP Company RTP 6001-60A Z Specialty Thermoplastic Elastomer
Mold Temperature 10.0 - 60.0 °C
50.0 - 140 °F
Ineos Nova 602 Crystal Polystyrene GP Grade  (discontinued **)
Broad, medium melt flow range, Broad Vicat rangeApplications: Any; Injection Molding and ExtrusionProperties were determined on injection molded specimens at 23°C and 50% R.H. unless otherwise spe..
Mold Temperature 10.0 - 40.0 °C
50.0 - 104 °F
Lucobit Lucofin® 1411-t3 Polyolefin TPO Granules, White
Lucofin are colored, highly stabilized polyolefin-based TPO granules. The t3 series is distinguished by good tenacity, high biaxial extensibility and flexibility outstanding breaking strength, and ..
Mold Temperature 10.0 - 40.0 °C
50.0 - 104 °F
Lucobit Lucofin® 1414-t2 Polyolefin TPO Granules, Silk Grey
Lucofin are colored, highly stabilized polyolefin-based TPO granules. The t2 series is distinguished by good tenacity, high biaxial extensibility and flexibility outstanding breaking strength, and ..
Mold Temperature 10.0 - 60.0 °C
50.0 - 140 °F
ISO 294
Styrolution PS 576H HIPS
Styrolution PS 576H is a high gloss, high impact polystyrene with a good flow and good heat resistance.High gloss HIPSGood flow and heat resistanceHIPS with good balance of mechanical properties and..
Mold Temperature 10.0 - 60.0 °C
50.0 - 140 °F
ISO 294
Styrolution PS 158K GPPS
Styrolution PS 158K is a heat resistant, rapid freezing general purpose grade. It is suitable for expanded sheet and film; for blends with high impact Styrolution PS in heat contact applications; fo..
Mold Temperature 10.0 - 40.0 °C
50.0 - 104 °F
Lubrizol Estane® S198A Thermoplastic Polyurethane
Type: Estane® S198A is a Shore 98A, polyester grade thermoplastic polyurethane (TPU). FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding.Availability: Americas, Europe, Middle East, ..
Mold Temperature 10.0 - 40.0 °C
50.0 - 104 °F
Lubrizol Estane® S364D Thermoplastic Polyurethane
Type: Estane® S364D is a Shore 65D, polyester based thermoplastic polyurethane (TPU) with excellent transparency. FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding.Availability: Asi..
Mold Temperature 10.0 - 40.0 °C
50.0 - 104 °F
Lubrizol Estane® S395A Thermoplastic Polyurethane
Type: Estane® S395A is a Shore 95A, polyester based thermoplastic polyurethane (TPU) with excellent transparency. FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding, Extrusion.Availa..
Mold Temperature 10.0 - 40.0 °C
50.0 - 104 °F
Borealis BorPURE™ MB6562 High Density Polyethylene for Injection Molding
BorPure™ MB6562 is a bimodal, high-density polyethylene intended for injection and compression molding. This grade combines excellent organoleptic properties, environmental stress crack resistance ..
Mold Temperature 10.0 - 23.9 °C
50.0 - 75.0 °F
RTP Company RTP 2099 X 126211 Z Bio-Based Polylactic Acid (PLA); FDA Compliant Ingredients - Impact Modified - Transparent - 89% Renewable Resource Content
Not optically transparent.  Thick wall sections can be hazy. For detailed processing information, see the PLA Molding Guide on the RTP Company website.
Mold Temperature 10.0 - 26.7 °C
50.0 - 80.0 °F
Ecomass® 4703ZB92 Filled Polyurethane
Nontoxic alternative to Lead (Pb), radiation shielding applicationsModerate Specific GravityFilled Polyurethane (TPU) Base ResinFlexibleInformation provided by Technical Polymers
Mold Temperature 10.0 - 26.7 °C
50.0 - 80.0 °F
Ecomass® 4703ZC87 Stainless Steel Filled Polyurethane
Nontoxic alternative to Lead (Pb), weighting and balancing applicationsModerate Specific GravityStainless Steel Filled Polyurethane (TPU)FlexibleInformation provided by Technical Polymers
Mold Temperature 10.0 - 51.7 °C
50.0 - 125 °F
Processing
ExxonMobil Santoprene® 103-40 Thermoplastic Elastomer
A hard, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range ..
Mold Temperature 10.0 - 51.7 °C
50.0 - 125 °F
Processing
ExxonMobil Santoprene® 8271-55 Thermoplastic Elastomer
A soft, colorable, specialty, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with FDA regulations for rubber articles intended for repeated ..
Mold Temperature 10.0 - 51.7 °C
50.0 - 125 °F
Processing
ExxonMobil Santoprene® 271-73 Thermoplastic Elastomer
A soft, colorable, specialty thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with FDA regulations for rubber articles intended for repeated use, as well as t..
Mold Temperature 10.0 - 30.0 °C
50.0 - 86.0 °F
Arkema Group Pebax® 2533 SA 01 MED Polyether Block Amide (PEBA)
Polyether block amide PEBAX® 2533 SA 01 MED is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet t..
Mold Temperature 10.0 - 30.0 °C
50.0 - 86.0 °F
Arkema Group Pebax® 3533 SA 01 MED Polyether Block Amide (PEBA)
Polyether block amide PEBAX® 3533 SA 01 MED is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet t..
Mold Temperature 10.0 - 50.0 °C
50.0 - 122 °F
Injection
Alliance Polymers Viprene™ G70A-32U-NAT Thermoplastic Vulcanizate Elastomer
Viprene™ G70A-32U-NAT is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac..
Mold Temperature 10.0 - 50.0 °C
50.0 - 122 °F
Injection
Alliance Polymers Viprene™ G90A-32U-BLK Thermoplastic Vulcanizate Elastomer
Viprene™ G90A-32U-BLK is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac..
Mold Temperature 10.0 - 65.6 °C
50.0 - 150 °F
Injection Molding
Teknor Apex Sarlink® 3460N Thermoplastic Elastomer
A NSF certified, colorable, multi-purpose thermoplastic elastomer featuring excellent fluid resistance and high temperature performance. It can be processed by injection molding, blow molding or ext..
Mold Temperature 10.0 - 79.4 °C
50.0 - 175 °F
RTP Company RTP 2800 B-75A Thermoplastic Polyolefin Elastomer (TEO)  (discontinued **)
Data for this product has not been recently verified, please contact RTP Company for more information before specifying this grade.
Mold Temperature 10.0 - 79.4 °C
50.0 - 175 °F
RTP Company RTP 2800 B-70A Z Thermoplastic Polyolefin Elastomer, FDA Compliant Ingredients  (discontinued **)&
Data for this product has not been recently verified, please contact RTP Company for more information before specifying this grade.
Mold Temperature 10.0 - 71.1 °C
50.0 - 160 °F
LTL Color Compounds ColorFast® FRPS200 Styrene, High Impact
V0/5VA high impact styreneAll information provided by LTL Color Compounders, Inc.
Mold Temperature 10.0 - 40.0 °C
50.0 - 104 °F
Lucobit Lucofin® 1412-t1 Polyolefin TPO Granules, Light Grey
Lucofin are colored, highly stabilized polyolefin-based TPO granules. The t1 series is distinguished by good tenacity, high biaxial extensibility and flexibility outstanding breaking strength, and ..
Mold Temperature 10.0 - 65.6 °C
50.0 - 150 °F
Injection Molding
Teknor Apex Sarlink® 4149D Thermoplastic Elastomer
A highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4149D is a high hardness grade possessing exceptional tensile strength, superior compression set, chemical re..
Mold Temperature 10.0 - 79.4 °C
50.0 - 175 °F
RTP Company RTP 2800 B-80A Z Thermoplastic Polyolefin Elastomer, FDA Compliant Ingredients  (discontinued **)&
Data for this product has not been recently verified, please contact RTP Company for more information before specifying this grade.
Mold Temperature 10.0 - 40.0 °C
50.0 - 104 °F
Lucobit Lucofin® 1414-t3 Polyolefin TPO Granules, Silk Grey
Lucofin are colored, highly stabilized polyolefin-based TPO granules. The t3 series is distinguished by good tenacity, high biaxial extensibility and flexibility outstanding breaking strength, and ..
Copyright © lookpolymers.com All Rights Reserved