Thermal Properties | Metric | English | Comments |
---|---|---|---|
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D696 |
NOVA Chemicals Novapol® HB-W555-A HDPE Blow Molding Resin Molded Plaque Properties. Features: High molecular weight, rigidity, excellent ESCR, excellent impact strength.Applications: drums, large industrial parts.Data provided by the manufacturer. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D696 |
NOVA Chemicals Novapol® HB-W952-A HDPE Extrusion Resin Molded Plaque Properties. Features: High molecular weight, excellent ESCR, impact strength, high rigidity.Applications: large-part blow-molding, trash cans, drums, jerry cans, fuel tanks.Data provi.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D696 |
NOVA Chemicals Novapol® HD-2007-H HDPE Extrusion Resin Features: Excellent ESCR and toughness, high strength, excellent processability, very high melt strength.Applications: pipe, water pipe, fuel gas pipe, re-lining pipe, steel pipe coating.Data provid.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D696 |
NOVA Chemicals Novapol® HD-2100-U MDPE Extrusion Resin Features: Excellent ESCR and toughness, high strength, excellent processability.Applications: pipe, water pipe, fuel gas pipe, re-lining pipe, steel pipe coating.Data provided by the manufacturer. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D696 |
NOVA Chemicals Novapol® HE-Y449-A HDPE Extrusion Resin Features: High ESCR, good toughness, good chemical resistance, good processability.Applications: Pipe coatings, profile extrusions, sheet extrusion for thermoforming, corrugated tubing, conduit.Data.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D746 |
Petromont 4101 High Density Polyethylene Resin Petromont HDPE 4101 is a high density polyethylene copolymer resin produced using the UNIPOL® Process. This resin is primarily used in the extrusion of corrugated pipes for drainage applications, f.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D746 |
Petromont 4102 High Density Polyethylene Resin Petromont HDPE 4102 is a high density polyethylene copolymer resin produced using the UNIPOL® Process. This resin is intended for general use in large diameter light weight drainage tubing applicat.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ISO 974 |
DuPont Performance Polymers Hytrel® HTR237BG BK320 TPC-ET
(Unverified Data**) Hytrel® HTR237BG is designed for blow molding or processing techniques requiring high viscosity. It has nominal durometer hardness of 45D, is pigmented black with fine particle size carbon black an.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ISO 974 |
DuPont Performance Polymers Hytrel® HTR8223 BK320 TPC-ET
(Unverified Data**) Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D, is pigmented black with fine particle size carbon black, a.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D746 |
Chevron Phillips HiD® 9412/HiD® 9413 with Antistat HDPE Blow Molding Resin
(discontinued **) Resin Type: Linear Copolymer; Blow Molding, Injection Blow Molding ResinCharacteristics: Medium Molecular Weight Distribution, Reduced Yellow Potential, Wide Range of Processing Conditions, Good Flo.. |
|||
Brittleness Temperature | -100 - -40.0 °C | -148 - -40.0 °F | Average value: -84.7 °C Grade Count:42 |
Overview of materials for Ethylene Vinyl Acetate Copolymer (EVA), Molded/Extruded This property data is a summary of similar materials in the MatWeb database for the category "Ethylene Vinyl Acetate; Molded/Extruded". Each property range of values reported is minimum and maximum .. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
Teknor Apex ELEXAR® EL 8431 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
DuPont Elvax® 650Q Ethylene Vinyl Acetate DuPont™ Elvax® 650Q is an ethylene-vinyl acetate copolymer resin for use in industrial applications.Applications:Elvax® 650Q resins can be used for the following applications: molding, compoundin.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D762 |
DuPont Elvax® 660 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
DuPont Elvax® 760 Ethylene Vinyl Acetate DuPont™ Elvax® 760 is a low BHT anti-oxidant ethylene-vinyl acetate copolymer resin for use in industrial applications. Applications: Elvax® 760 resins can be used for the following application.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
DuPont Elvax® 770 Ethylene Vinyl Acetate DuPont™ Elvax® 770 is a low BHT anti-oxidant ethylene-vinyl acetate copolymer resin for use in industrial applications. Applications: Elvax® 770 resins can be used for the following application.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
A. Schulman LP642 Narrow Molecular Weight Copolymer, High-Density Polyethylene DescriptionLP 642 is a narrow molecular weight copolymer, high-density polyethylene combining high flow for thin wall articles with excellent toughness. ApplicationApplications of LP 642 include fo.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D 746 |
Total 3802 Blue MDPE pipe, injection molding FINATHENE® 3802 Blue is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low pressure slurry polymerization process. FINATHENE® 3802 Blue is a blue polyeth.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D762 |
DuPont Elvax® 360 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D762 |
DuPont Elvax® 750 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D 746 |
Total HP 401 MDPE, pipe, cable, sheet FINATHENE® HP 401 is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low-pressure slurry polymerization process. FINATHENE® HP 401 is a black high densit.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
A. Schulman LP481 Molding Grade High-Density Polyethylene DescriptionLP 481 is a molding grade high-density polyethylene. Information provided by A. Schulman. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D746 |
Chevron Phillips Marlex® 9512H - 9513H High Performance Series HDPE Blow Molding Resin Resin Type: linear copolymerCharacteristics: excellent physical properties, medium molecular weight distribution, wide range of processing conditions, good flow for injection blow molding applicatio.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | Compression molded parts prepared according to ASTM D 1928, procedure A.; ASTM D746 |
Dow DGDB-2480 NT High Density Polyethylene Resin DOW DGDA-2475 NT is produced using UNIPOL™ process technology. It is intended for use in pipe applications where long term hydrostatic strength and resistance to slow crack growth are desired. Su.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | Compression molded parts prepared according to ASTM D 1928, procedure A.; ASTM D746 |
Dow FINGERPRINT™ DFDA-7510 NT Linear Low Density Polyethylene Resin FINGERPRINT™ DFDA-7510 NT resin is produced using UNIPOL™ process technology. It is intended for use in micro irrigation tube, durable hose and tube, profile extrusion, and injection molded fitti.. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | Compression molded parts prepared according to ASTM D 1928, procedure A.; ASTM D746 |
Dow DNDB-7441 NT 7 Linear Low Density Polyethylene Resin DOW DNDB-7441 NT 7 is produced using UNIPOL™ PE process technology. It is intended for use in hose and tube applications. It also has utility in gasketing, spiral wound hose, and corrugated hose .. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
DuPont™ Surlyn® 9730 Ionomer Resin, Zinc
(discontinued **) Surlyn® 9730 thermoplastic resin is an advanced ethylene/methacrylic acid (E/MAA) copolymer, in which the MAA acid groups have been partially neutralized with zinc ions. The amount of MAA and neutr.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
DuPont Elvax® 240 Ethylene Vinyl Acetate
(discontinued **) DuPont™ Elvax® 240 is an ethylene-vinyl acetate copolymer resin for use in industrial applications. Applications:Elvax® 240 resins can be used for the following applications: adhesives, sealants,.. |
|||
Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
A. Schulman LP481 Molding Grade High-Density Polyethylene DescriptionLP 481 is a molding grade high-density polyethylene. Information provided by A. Schulman. |
|||
Brittleness Temperature | <= -100 °C | <= -148 °F | ASTM D762 |
DuPont Elvax® 250 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with.. |