LG Chemical LUPOS GP2100 ABS+GF10%, General Purpose

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), 10% Glass Fiber Filled
Manufacturer	LG Chemical
Trade Name	LUPOS
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LG Chemical LUPOS GP2100 ABS+GF10%, General Purpose.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Feature: Injection Molding, ABS+GF10%, General PurposeApplication: Electric & Electronic (Housing, Components)CAS No. 9003-56-9, 9003-54-7 and 65997-17-3Information provided by LG Chemical

Physical Properties	Metric	English	Comments
Specific Gravity	1.10 g/cc	1.10 g/cc	ASTM D792
Maximum Moisture Content	0.020	0.020	Injection Molding
Linear Mold Shrinkage, Flow	0.0020 - 0.0040 cm/cm @Thickness 3.20 mm	0.0020 - 0.0040 in/in @Thickness 0.126 in	ASTM D955
Melt Flow	4.2 g/10 min @Load 3.80 kg, Temperature 230 Â°C	4.2 g/10 min @Load 8.38 lb, Temperature 446 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	114	114	ASTM D785
Tensile Strength, Yield	64.7 MPa @Thickness 3.20 mm	9390 psi @Thickness 0.126 in	50mm/min; ASTM D638
Elongation at Break	5.0 % @Thickness 3.20 mm	5.0 % @Thickness 0.126 in	50mm/min; ASTM D638
Flexural Yield Strength	108 MPa @Thickness 3.20 mm	15600 psi @Thickness 0.126 in	10mm/min; ASTM D790
Flexural Modulus	3.73 GPa @Thickness 3.20 mm	540 ksi @Thickness 0.126 in	10mm/min; ASTM D790
Izod Impact, Notched	0.981 J/cm @Thickness 3.20 mm, Temperature 23.0 Â°C	1.84 ft-lb/in @Thickness 0.126 in, Temperature 73.4 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	97.0 Â°C @Thickness 6.40 mm	207 Â°F @Thickness 0.252 in	Unannealed; ASTM D648
UL RTI, Electrical	60.0 Â°C @Thickness >=1.50 mm	140 Â°F @Thickness >=0.0591 in
UL RTI, Mechanical with Impact	60.0 Â°C @Thickness >=1.50 mm	140 Â°F @Thickness >=0.0591 in
UL RTI, Mechanical without Impact	60.0 Â°C @Thickness >=1.50 mm	140 Â°F @Thickness >=0.0591 in
Flammability, UL94	HB @Thickness >=1.50 mm	HB @Thickness >=0.0591 in

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	220 - 235 Â°C	428 - 455 Â°F	Injection Molding
Middle Barrel Temperature	220 - 240 Â°C	428 - 464 Â°F	Injection Molding
Front Barrel Temperature	220 - 240 Â°C	428 - 464 Â°F	Injection Molding
Nozzle Temperature	230 - 245 Â°C	446 - 473 Â°F	Injection Molding
Melt Temperature	235 - 245 Â°C	455 - 473 Â°F	Injection Molding
Mold Temperature	50.0 - 80.0 Â°C	122 - 176 Â°F	Injection Molding
Drying Temperature	80.0 - 100 Â°C	176 - 212 Â°F	Injection Molding
Dry Time	4.00 - 5.00 hour	4.00 - 5.00 hour	Injection Molding
Back Pressure	0.981 - 3.92 MPa	142 - 569 psi	Injection Molding
Screw Speed	40 - 60 rpm	40 - 60 rpm	Injection Molding

Users viewing this material also viewed the following: