TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 3.0 PHR MBT

Category	Polymer , Thermoset , Polyester, TS , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 3.0 PHR MBT.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and many other high performance polyurethane applications. Millathane 76 can be vulcanized by sulfur or peroxide cured systems.The combination of thiazole accelerators, MBTS and MBT, enable the best possible cure for Millathane® 76. An increase in MBTS results in a higher state of cure and increased processing safety.An increase in MBT decreases scorch time and increases the state of cure.All information provided by TSE Industries

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	68	68
Tensile Strength, Yield	32.99 MPa	4785 psi
Elongation at Yield	545 %	545 %
100% Modulus	0.00369 GPa	0.535 ksi
200% Modulus	0.008377 GPa	1.215 ksi
300% Modulus	0.0150 GPa	2.18 ksi
Tear Strength	60.4 kN/m	345 pli	Die C
Compression Set	32 % @Temperature 70.0 °C, Time 79200 sec	32 % @Temperature 158 °F, Time 22.0 hour

Processing Properties	Metric	English	Comments
Cure Time	3.00 min @Temperature 155 °C	0.0500 hour @Temperature 311 °F	ts2
	7.00 min @Temperature 155 °C	0.117 hour @Temperature 311 °F	TC90

Users viewing this material also viewed the following: