DuPont Performance Polymers Zytel® 7304 NC010 Nylon 6 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 6
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® 7304 NC010 Nylon 6 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Zytel® 7304 NC010 is a medium viscosity, unlubricated polyamide 6 resin for extrusion applications.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Specific Gravity	1.13 g/cc	1.13 g/cc	DAM; ASTM D792
Water Absorption	3.0 % @Temperature 23.0 °C	3.0 % @Temperature 73.4 °F	Equilibrium 50%RH; DAM; ASTM D570
Linear Mold Shrinkage	0.012 cm/cm @Thickness 3.20 mm	0.012 in/in @Thickness 0.126 in	Flow; DAM

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	50.0 MPa @Temperature 23.0 °C	7250 psi @Temperature 73.4 °F	50%RH; ASTM D638
	80.0 MPa @Temperature 23.0 °C	11600 psi @Temperature 73.4 °F	DAM; ASTM D638
Tensile Modulus	1.50 GPa @Temperature 23.0 °C	218 ksi @Temperature 73.4 °F	50%RH; ASTM D638
	3.00 GPa @Temperature 23.0 °C	435 ksi @Temperature 73.4 °F	DAM; ASTM D638
Izod Impact, Notched	0.480 J/cm @Temperature -40.0 °C	0.899 ft-lb/in @Temperature -40.0 °F	DAM; ASTM D256
	1.33 J/cm @Temperature 23.0 °C	2.49 ft-lb/in @Temperature 73.4 °F	DAM; ASTM D256
	6.40 J/cm @Temperature 23.0 °C	12.0 ft-lb/in @Temperature 73.4 °F	50%RH; ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	220 °C	428 °F	DAM; ASTM D3418
	220 °C	428 °F	10°C/min; DAM; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	160 °C	320 °F	DAM; ISO 75-1/-2
	160 °C	320 °F	DAM; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	65.0 °C	149 °F	DAM; ASTM D648
	65.0 °C	149 °F	DAM; ISO 75-1/-2

Processing Properties	Metric	English	Comments
Melt Temperature	230 - 240 °C	446 - 464 °F	DAM; Extrusion
	235 °C	455 °F	DAM; Optimum; Extrusion
	270 °C	518 °F	DAM; Optimum; Injection Molding
	260 - 280 °C	500 - 536 °F	DAM; Injection Molding
Mold Temperature	50.0 - 90.0 °C	122 - 194 °F	DAM; Injection Molding
	70.0 °C	158 °F	DAM; optimum; Injection Molding
Drying Temperature	80.0 °C	176 °F	DAM; Injection Molding
	80.0 °C	176 °F	DAM; Extrusion
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour	DAM; Injection Molding
	4.00 - 6.00 hour	4.00 - 6.00 hour	DAM; Extrusion
Moisture Content	<= 0.050 %	<= 0.050 %	DAM; Injection Molding
	<= 0.050 %	<= 0.050 %	DAM; Extrusion

Descriptive Properties	Value	Comments
Appearance	Natural Color	DAM
Drying Recommended	Yes, if moisture content of resin exceeds recommended level	DAM
Features	Chemical Resistance, Good	DAM
	Fuel Resistant	DAM
	Grease Resistant	DAM
	Oil Resistant	DAM
Forms	Pellets	DAM
Generic	Nylon 6	DAM
Material Status	Current	DAM
Part Marking Code	>PA6<	ISO 11469; DAM
Processing Method	Extrusion	DAM
	Injection Molding	DAM
Product Category	Extrusion Resins	DAM
	Unreinforced Resins	DAM
Resin Identification	PA6	ISO 1043; DAM
RoHS Compliance	Contact Manufacturer	DAM
Uses	Appliance Components	DAM
	Automotive Applications	DAM
	Electrical/Electronic Applications	DAM
	Industrial Applications	DAM

Users viewing this material also viewed the following: