Quadrant EPP Symalit® 1000 PFA unfilled, lining industries (ISO Data)

Category	Polymer , Thermoplastic , Fluoropolymer , PFA
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Symalit®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Symalit® 1000 PFA unfilled, lining industries (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Symalit 1000 PFA is made from a fluoropolymer resin that is a copolymer of tetrafluoroethylene and perfluorovinylether. It exhibits good mechanical properties combined with excellent electrical properties and outstanding chemical and heat resistance Almost unlimited resistance to chemicals Widest service temperature range from - 190 °C up to + 260 °C (- 310 °F up to + 500 °F) Very low permeation values Excellent stress cracking resistance Very low leach-out values for high purity applications Excellent abrasion resistance Excellent ageing stability Resistance to UV-, ß- and gamma -rays High dielectric and piezoelectric values Clear (translucent)

Physical Properties	Metric	English	Comments
Density	2.14 g/cc	0.0773 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.010 %	0.010 %	50% RH
Water Absorption at Saturation	<= 0.030 %	<= 0.030 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	70	70	ISO 2039-2
Hardness, Shore D	57	57
Ball Indentation Hardness	35.0 MPa	5080 psi	ISO 2039-1
Tensile Strength	15.0 MPa	2180 psi	at Yield; ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	50 %	50 %	ISO 527-1/-2
Tensile Modulus	0.575 GPa	83.4 ksi	ISO 527-1/-2
Flexural Strength	18.5 MPa	2680 psi
Compressive Strength	5.50 MPa @Strain 1 %	798 psi @Strain 1 %	ISO 604
	10.0 MPa @Strain 2 %	1450 psi @Strain 2 %	ISO 604
	16.0 MPa @Strain 5 %	2320 psi @Strain 5 %	ISO 604
K Factor (ISO)	1450 µm/km	1450 µm/km
Charpy Impact Unnotched	NB	NB	ISO 179-1/1eU
Charpy Impact, Notched	7.50 J/cm²	35.7 ft-lb/in²	Partial Break; ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.25 - 0.35	0.25 - 0.35

Thermal Properties	Metric	English	Comments
CTE, linear	135 µm/m-°C @Temperature 23.0 - 100 °C	75.0 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.200 W/m-K	1.39 BTU-in/hr-ft²-°F
Melting Point	305 °C	581 °F	DSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air	250 °C	482 °F	Continuous
Deflection Temperature at 1.8 MPa (264 psi)	40.0 °C	104 °F	ISO 75-1/-2
Flammability, UL94	V-0	V-0
Oxygen Index	>= 95 %	>= 95 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+14 ohm-cm	>= 1.0e+14 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+13 ohm	>= 1.0e+13 ohm	IEC 60093
Dielectric Constant	2.1 @Frequency >=100000 Hz	2.1 @Frequency >=100000 Hz	IEC 60250
Dielectric Strength	35.0 kV/mm	889 kV/in
Dissipation Factor	<= 0.00050 @Frequency 100000 Hz	<= 0.00050 @Frequency 100000 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Compliance Properties	Metric	English	Comments
3A-Dairy	No	No
European Food 1935/2004	No	No
FDA	Yes	Yes	only natural
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Acceptable	Acceptable
Acids, Weak	Acceptable	Acceptable
Alcohols	Acceptable	Acceptable
Alkalies, Strong (pH 11-14)	Unacceptable	Unacceptable
Alkalies, Weak	Limited	Limited
Chlorinated Solvents	Limited	Limited
Continuous Sunlight	Limited	Limited
Hot Water / Steam	Acceptable	Acceptable
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Acceptable	Acceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Unacceptable	Unacceptable

Users viewing this material also viewed the following: