- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- IRPC Polimaxx Polene GG3245 High Density Polyethylene
IRPC Polimaxx Polene GG3245 High Density Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE |
| Manufacturer | IRPC Polimaxx |
| Trade Name | Polene |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | IRPC Polimaxx Polene GG3245 High Density Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
CHARACTERISTICS: EXCELLENT ENVIRONMENTAL STRESS CRACKING RESISTANCE (ESCR) EXCELLENT IMPACT STRENGTH, GOOD PROCESSABILITY, HIGH TOUGHNESSAPPLICATIONS: BLOW MOLDING/ SHEET/ THERMOFORMING EXTRUSION CONTAINERS 5 - 60 LITRES FOR DETERGENT AND INDUSTRIAL CHEMICALS, AUTOPARTS
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.945 g/cc | 0.0341 lb/in³ | ASTM D792 |
| Environmental Stress Crack Resistance | >= 1000 hour | >= 1000 hour | Condition B, F50; ASTM D1693 |
| Melt Flow | 0.050 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.050 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| 0.25 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.25 g/10 min @Load 11.0 lb, Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 63 | 63 | DIN 53505 |
| Tensile Strength at Break | 42.0 MPa | 6090 psi | ASTM D638 |
| Tensile Strength, Yield | 23.5 MPa | 3410 psi | ASTM D638 |
| Elongation at Break | 1750 % | 1750 % | ASTM D638 |
| Charpy Impact, Notched | 1.60 J/cm² | 7.61 ft-lb/in² | DIN 53453 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 200 - 220 °C | 392 - 428 °F |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved