Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 125 °C | 257 °F | B |
Plastcom SLOVALEN PQ 81 T 25 PP, 25% mineral filling FeaturesModified PP for injection moulding with the content of 25% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shri nkage. Gen.. |
|||
Vicat Softening Point | 125 °C @Load 1.00 kg |
257 °F @Load 2.20 lb |
ISO 306/A |
Polimeri Europa Eraclene® MQ 70 High Density Polyethylene - Injection Molding Eraclene MQ 70 is a high density polyethylene resin (HDPE) with antioxidants, suitable for injection molding application.Eraclene MQ 70 is suggested in applications for which high creep, impact and .. |
|||
Vicat Softening Point | 125 °C | 257 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Lexan® ADX1016R PC (Europe-Africa-Middle East) Lexan Copolymer resin with improved chemical resistance, available only in limited colors. |
|||
Vicat Softening Point | 125 °C | 257 °F | 50°C/hr; 50N |
Polimeri Europa KOBLEND HI 75 PBT+PC, Impact Grade
(discontinued **) Symbol according to ISO 1043/1: PBT+PC-HI Elastomer modified PBT+PC blend with good impact behaviour, good dimensional stability, good stiffness, resistant to solvents. Main application fields: au.. |
|||
Vicat Softening Point | 125 °C @Load 5.001 kg |
257 °F @Load 11.03 lb |
50°C/h; ISO 306 |
Polykemi AB POLYfill PPH GF8030 PB Polypropylene Homopolymer, Glass Fibre-Reinforced, Chemically Coupled Information provided by Polykemi AB |
|||
Vicat Softening Point | 125 °C @Load 5.001 kg |
257 °F @Load 11.03 lb |
50°C/h; ISO 306 |
Polykemi AB POLYfill PPH GF8030 PD1 VT2 PP, Glass Fiber-Reinforced, Chemically Coupled Heat Stabilized Information provided by Polykemi AB |
|||
Vicat Softening Point | 125 °C | 257 °F | 50°C/h 50N; ISO 306 |
DSM Stapron® E EM 605 Polycarbonate/PET Blend (European Grade)
(discontinued **) Information provided by DSM. |
|||
Vicat Softening Point | 125 °C | 257 °F | (VST/B/50); ASTM D1525 |
Albis Plastics Polypropylene A 12 H-GK20/GF20 C , 20% Glass Bead/20% Glass Fiber
(discontinued **) Semi-crystalline Polypropylene Homopolymer (PPHP)Characteristics: Chemically Coupled Fiber; Good Dimensional StabilityApplications: Appliances, Furniture, Cases, Packaging and NoveltiesProcessing: I.. |
|||
Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
Braskem BS 002J HDPE Blow Molding Polyethylene
(discontinued **) Applications: Bottles up to 60 liters with high ESCR; bottles for surface-active agents. Information provided by Braskem |
|||
Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
LyondellBasell Alathon® M4855 High Density Polyethylene, Injection Molding Grade ALATHON M4855 is a high density copolymer for use in injection molding applications. It exhibits excellent impact, warp and environmental stress crack resistance. Typical applications for M4855X01 a.. |
|||
Vicat Softening Point | 125 °C @Load 1.00 kg |
257 °F @Load 2.20 lb |
ASTM D1525 |
LG Chemical SEETEC T3410 Polypropylene Random Terpolymer Features: Seetec T3410 is a polypropylene-ethylene-butene random terpolymer designed for the production of Transparent Film and Expandable PP for low seal temperature and high impact strength. It of.. |
|||
Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
IRPC Polimaxx Polene GA3750 High Density Polyethylene CHARACTERISTICS: GOOD EXTRUDABILITY, HIGH IMPACT STRENGTHAPPLICATIONS: BLOW FILM EXTRUSION FOR SHOPPING BAGS, GROCERY BAGS |
|||
Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
IRPC Polimaxx Polene GG3245 High Density Polyethylene CHARACTERISTICS: EXCELLENT ENVIRONMENTAL STRESS CRACKING RESISTANCE (ESCR) EXCELLENT IMPACT STRENGTH, GOOD PROCESSABILITY, HIGH TOUGHNESSAPPLICATIONS: BLOW MOLDING/ SHEET/ THERMOFORMING EXTRUSION CO.. |
|||
Vicat Softening Point | 125 °C @Load 5.00 kg |
257 °F @Load 11.0 lb |
|
LATI Latishield 38/11-08A G/10 ABS/PC, Steel/Glass Fiber Reinforced EMI shielding product based on ABS/PC Blend (ABS/PC). Steel fibers. Glass fibers. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati I.. |
|||
Vicat Softening Point | 125 °C | 257 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Noryl PX9406N PPE+HIPS (Europe-Africa-Middle East) Noryl PX9406N is an unfilled, halogen free (according VDE/DIN 472 part 813) flame retardant material with medium heat resistance. This material is V0 at 1.0 mm according to UL94.This data was suppli.. |
|||
Vicat Softening Point | 125 °C | 257 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Noryl V01505 PPE+HIPS Noryl* V01505 is a 15% milled fibre reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t.. |
|||
Vicat Softening Point | 125 °C | 257 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics XYLEX HX7509HP PC+POLYESTER (Europe-Africa-Middle East) Medium flow, polycarbonate/Polyester alloy; contains mold release. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), fo.. |
|||
Vicat Softening Point | 125 °C | 257 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics NORYL PPX PPX630 PPE+PP (Europe-Africa-Middle East) PPX630 is a 30% glass filled alloy of PP and PPO providing design freedom for applications requiring a wide range of stiffness, toughness and temperature. Generic identification acc. ISO11469: PP+PP.. |
|||
Vicat Softening Point | 125 °C | 257 °F | ISO 306 |
Unipetrol PE HD LITEN® MS 57 HDPE Made for injection molding applications.Information provided by Unipetrol RPA |
|||
Vicat Softening Point | 125 °C | 257 °F | ISO 306 |
Total 3802 B HDPE, cable, sheet, pipe, injection molding FINATHENE® 3802 B is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low-pressure slurry polymerization process. FINATHENE® 3802 B is a black polyethylene.. |
|||
Vicat Softening Point | 125 °C | 257 °F | ISO 306 |
Total 3802 YCF MDPE pipe grade FINATHENE® 3802 Y CF is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low pressure slurry polymerization process. FINATHENE® 3802 Y CF is a yellow cadmi.. |
|||
Vicat Softening Point | 125 °C | 257 °F | 50 °C/h 10N; ISO 306 |
DSM Arnitel® EM631 TPC-ET Extrusion Grade |
|||
Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
CPC - Vycom POLYCARVE™ Coextruded High Density Sheet (HDPE) PolyCarve™ thermoplastic engraving sign stock made to permanently resist the destructive outdoor elements, and certain indoor environments. PolyCarve is a high density, UV stabilized polyethylene c.. |
|||
Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
Entec Hypel® PEHD18/.956 HDPE Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ente.. |
|||
Vicat Softening Point | 125 °C | 257 °F | 0.125 inch, 1 Kg; ASTM D1525 |
Diamond Polymers ABS/PC FC-30 Description: Injection Molding Grade, High Impact, Flame RetardantInformation provided by Diamond Polymers, Inc. |
|||
Vicat Softening Point | 125 °C | 257 °F | |
Dow HDPE 30460M High Density Polyethylene DOW HDPE 30460M resin is a medium molecular weight distribution copolymer designed to offer moderate impact strength and stress crack resistance with excellent rigidity. This resin has excellent pro.. |
|||
Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
Arkema Group ORGASOL® 3502 D Nat 1 Copolyamide 6/12 Information provided by Arkema Group |
|||
Vicat Softening Point | 125 °C @Load 1.02 kg |
257 °F @Load 2.25 lb |
ASTM-D1525 |
Braskem IG58 HDPE Injection Molding Polyethylene Copolymer IG58 is a high-density polyethylene, narrow molecular weight butene-1 copolymer produced by the solution process for injection molding applications. It offers high stiffness, impact strength and out.. |
|||
Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
SK Chemicals SKYTHANE® 368D S series Polyurethane SKYTHANE is a thermoplastic polyurethane elastomer (TPU). Like materials ranging from rubber to plastics, it has excellent physical properties such as anti-abrasion, oil-resistance and mechanical pr.. |